Literally for the last month I've been wondering about if X-Men would release a new 3x3! Stoked about this one. Let's take a moment and appreciate how cool that logo is!
Just got mine today. Very smooth and quiet. Good adjustable magnet range. It is slightly smaller but it feels sturdy and responsive. When loosened to settings 1 or 2 the corner cutting isn't actually too bad.
Got mine a month ago... Overall smooth and quiet, nice for your asian mom who hates loud cube turning sound... 125 different settings, you wouldn't asked for more My settings is 1 in the centre, 4 for the outer circle and middle settings for the magnets, try it out, might fits you too ;) Customization is simple af, ngl, just the magnets are quite a hassle, 2 sides on each corner, which means you have to set it 24 times... Reverse corner cutting is not that bad when its a bit loose, but if you really want a stable cube, develop an accurate turning style is the way to go Not recommended for new cubers, cause you guys don't know about your turning style and this cube is not suitable for that task.. Getting the WR M 2021 might be better As for the advanced cubers, give it a shot, cause, why not, right? You guys have cubed for awhile and know your turning style, and this cube might satisfy you Overall would say its a good product to play around and explore. I had an average of upper 8 to lower 9 with this cube, and my average with other cubes are slightly higher (maybe around 10-11, not sure because I haven't touched them since using this), it is my main now... Good Job Qiyi and SCS... till next time, bye!
@@msn2005 I do get some lockups on M moves and some F move transitions (such as the Y Perm), and sometimes it likes to corner twist, but I must say it's a unique feeling when it comes to turning. Despite those problems I still had my last layer executed with my max speed. Well maybe it's down to personal preferences, so I can't guarantee everyone will have the same result
It would be waay more better with just slightly better corner cutting (especially reverse corner cutting) I think they could even swap the magnet adjustment system for better corner cutting. Then it would be like one of the best cubes for its price. For me, I am a quite accurate turner so it's not that a big problem but many other people pretty much rely on corner cuts
Hey bro my timing to solve 3×3 cube is 1:40 i am beginner Tornado V2 is good for beginners Or this is only for advance cubers? I am confused to buy this cube because I m beginner Suggest me some ideas
i get shulker box vibes from that intro lol
lol same
Same bro or girl
I feel more like that noise when you enter the end
Hi minecrafters
I know right.
cameron: ah wrong algorithm
also cameron 10 seconds later: i know exactly what im doing
Literally for the last month I've been wondering about if X-Men would release a new 3x3! Stoked about this one.
Let's take a moment and appreciate how cool that logo is!
Actually, I wondered as well xD
I've been waiting my entire life for this
I've.been obssessed with hearing cube turning sounds, and this one is definitely the best
I dig the color scheme. I look forward to adding it to my collection.
Just got mine today. Very smooth and quiet. Good adjustable magnet range. It is slightly smaller but it feels sturdy and responsive. When loosened to settings 1 or 2 the corner cutting isn't actually too bad.
So, glossy is really grippy, and PVC is even more, so, if if the UV 11mpro is really grippy, then what if I PVC coated a UV 11 m pro? Ultra mega grip?
If you add a new layer on an old one, you will feel the outermost layer
Ur hurting my brain
when you're so early they haven't even added the end screen
oh my gosh thanks for 14 likes guys!
This new style of videos is amazing. Super excited for thr full video!!!
The new intro is FIRE
Got mine a month ago...
Overall smooth and quiet, nice for your asian mom who hates loud cube turning sound...
125 different settings, you wouldn't asked for more
My settings is 1 in the centre, 4 for the outer circle and middle settings for the magnets, try it out, might fits you too ;)
Customization is simple af, ngl, just the magnets are quite a hassle, 2 sides on each corner, which means you have to set it 24 times...
Reverse corner cutting is not that bad when its a bit loose, but if you really want a stable cube, develop an accurate turning style is the way to go
Not recommended for new cubers, cause you guys don't know about your turning style and this cube is not suitable for that task.. Getting the WR M 2021 might be better
As for the advanced cubers, give it a shot, cause, why not, right? You guys have cubed for awhile and know your turning style, and this cube might satisfy you
Overall would say its a good product to play around and explore. I had an average of upper 8 to lower 9 with this cube, and my average with other cubes are slightly higher (maybe around 10-11, not sure because I haven't touched them since using this), it is my main now...
Good Job Qiyi and SCS... till next time, bye!
do u get lockups in the last layer? can u go ur absolute fastest
@@msn2005 I do get some lockups on M moves and some F move transitions (such as the Y Perm), and sometimes it likes to corner twist, but I must say it's a unique feeling when it comes to turning. Despite those problems I still had my last layer executed with my max speed. Well maybe it's down to personal preferences, so I can't guarantee everyone will have the same result
your intro just rocks
I have watched it like a million times and it never gets old
Can't wait for it to come to the shop!
This cube seems very promising!! I never tried the V1. But I'm deffinetly going to check out the V2!!!
Thx for the info :)
Hey! You recovered from the thumb injury...😊
Yay! X-Man did it again!
The logo seems to confuse people.
I personally think that it shows an X and a D (in red), so that would be the “right” way to show it I guess.
Which one should i buy the tornado v2 m or the weilong wrm 2021 maglev
One big reason I like primary internals is so that I CAN see how dirty it gets. :(
Ew wtf
@@tuneboyz5634 The point is so that I know when to clean it, unlike black internals that can get gunked up and it would be hard to notice
I love the new intro
Wow! Two new 3x3 cubes on pre-order in May before 2 weeks of the month already ended and couple more!
He stoped talking to let us know how the cube sounds. Then he added a music. lmao
Cameron: qiyi
Captions: cheese
Hey Cameron your thumb good bro?
@@SpeedCubeShopOfficial Good that your thumb is better.
@@SpeedCubeShopOfficial get better soon
@@SpeedCubeShopOfficial lit videos bro, hope u get better soon
More X-man!!!
what do u use to make that sick intro?
Glad you recovered:)
x-man tornado is back yeauh
@5:10 you hold the logo flipped 90 degrees (their logo has the white parts facing top) :P
Ummm cameron can i ask something does this cube only comes in stickerless version?
0:08 the new intro is nice
The most epic intro
I like the old logo for big cubes and the new one for 4x4 and smaller
Nobody :
His Table Setup : beautiful as hecc
Been waiting for this review
How is your thumb?
i just got to sample one of these in the scs store. this will probably be main worthy when it comes out 👌
x man is making good progress
Definitely gonna try and get this one
Did you get rid of all the lubricants such as weight 3 4 5 ect?
finally.. a new release that caught my interestn when are they gonna be released?
Just picked up this cube!
Do you only solve white cross?
I am making it my main , as he comes in the store
there are so many choices of cubes now!
It would be waay more better with just slightly better corner cutting (especially reverse corner cutting)
I think they could even swap the magnet adjustment system for better corner cutting. Then it would be like one of the best cubes for its price. For me, I am a quite accurate turner so it's not that a big problem but many other people pretty much rely on corner cuts
Is it as quiet as the tengyun m? How does it compare?
I like the QiYi cube colors.
I’ve been waiting for this
Very good cube !
is it better than the gan 356 m lite?
How much is it
X-Man Set (Almost) 5x5 isn't released yet
2x2: X-Man Flare
3x3: X-Man Tornado
4x4: X-Man Ambition
5x5: ? ? ?
6x6: X-Man Shadow
7x7: X-Man Spark
Pyraminx: X-Man Bell
Megaminx: X-Man Galaxy
Skewb: X-Man Wingy
Square-1: X-Man Volt
Hey bro my timing to solve 3×3 cube is
1:40 i am beginner
Tornado V2 is good for beginners
Or this is only for advance cubers?
I am confused to buy this cube because I m beginner
Suggest me some ideas
The tornado is pretty good for beginners, but if i was you then i would buy the rs3m 2020
Is there a tensioning system?
When will it be released and how much
I didn't know Connor Mcdavid was a speedcuber
Yo Cameron how's ur thumb feeling? Are u okay!?
I will love that cube!
How's the finger
Hey Cameron! What will be the price of this puzzle?
looks great
Can u say me name of intro song ?
I feel like you should compare this to the other flagship cubes. Like both in feel and if you think it's as good or meh.
how much going to be ?
I want one
Too many new cubes I gotta make up my mind on which to order 🤣
Just ordered a yj mgc elite 3x3 and now this cube gets released. Damn should have waited
@@sushiiixo same
GOING TO GET ONE
I wonder where they find such killer music!
Me: I WANT THAT CUBE
if it costs less than 15 dollars
haha monye g0 bai bai
yess it’s probably gonna be mid range though 15-25$
I dont think it will be because the 2x2 is already 15$
@@stubblycuber2729 my estimate rn is 27.99$, it has lots of customization probably
Looks like that's the BELL magnet system
Note to self use this cube during class
How does the X-Man Tornado V2 compare to the RS3M 2020?
Hey do you know the answer now bro?
5:19 - 5:20 That's what she said
that's cube is sick ngl
Ye cuz it literally looks like a GAN cube
@@mistycredo4861 doesnt look like a Gan for me
lol i thought he said jeesuuss at 0:58
I wonder is Cam's finger ok, hope hes good
Hei look his finger looks good agen
man, still waiting on the new Zhanchi, .. plus want a Duo... now there's this and a new MoYu WRM coming out too? ... ugh... _take my moneys_
is ur finger all right?
Im pretty sure that Qiyi copy Gan in the internal
I don't know if GAN still makes cubes with black internals, other than the 11 M Pro.
You should send one to jperm
i guess x man is becoming the new gan
Kinda sad because I just bought a 11 M duo. I can’t wait but this cube looks honestly better and will probably be cheaper.😢
Rlly want this cube but I just got a yj mgc elite 3x3. No way I'm getting this now
I got a gan 11 m duo too but I will get this 😁😁👍 not flexing just saying
@@fragnatic286 hi bro did you get this cube?
Anybody know a good way to sell used cubes
What's the price ??
Argh... The logo it`s a sticker... I was hoping that was screenprinted.
But, very nice!! I ordered mine already.
I think it's okay
yo how much is this? i think im buying it
How much ?
So I’m curious if this cube attracts tornadoes or not....
thats quite an intro
cool
looks nice
It looks as if gan had a collab with moyu. Either way I want it
Ironically, neither of those companies were involved
It Is Qiyi's Cube Not Moyu's Or Gan's
Send to Jperm???
5:18
wow
I think that everycube now is looking like a GAN
Lamao