How to create and apply adhesive patterns: 1. Apply glue(Chloroprene glue) to the backside of the pattern. When applying the glue, make sure to spread it roughly rather than thinly, as this will enhance the adhesive strength. For this purpose, a type of glue commonly used in leathercraft is Chloroprene glue (rubber cement adhesive). 2. Allow the applied glue to dry thoroughly for at least 5 minutes. If it is not fully dried, it could potentially damage the leather. 3. Attach the pattern to the leather and perform cutting and punching as required. 4. Slowly remove the attached pattern when it is no longer needed. ★ Caution ★ This method is not suitable for vegetable-tanned leather. Since each leather type may have different characteristics, conducting a test beforehand is essential to ensure the best results. ★ Reference link ★ ua-cam.com/video/2JRb6aGYoaI/v-deo.htmlsi=ZjPpouBL1sIERHfu
How to create and apply adhesive patterns:
1. Apply glue(Chloroprene glue) to the backside of the pattern. When applying the glue, make sure to spread it roughly rather than thinly, as this will enhance the adhesive strength. For this purpose, a type of glue commonly used in leathercraft is Chloroprene glue (rubber cement adhesive).
2. Allow the applied glue to dry thoroughly for at least 5 minutes. If it is not fully dried, it could potentially damage the leather.
3. Attach the pattern to the leather and perform cutting and punching as required.
4. Slowly remove the attached pattern when it is no longer needed.
★ Caution ★
This method is not suitable for vegetable-tanned leather.
Since each leather type may have different characteristics, conducting a test beforehand is essential to ensure the best results.
★ Reference link ★
ua-cam.com/video/2JRb6aGYoaI/v-deo.htmlsi=ZjPpouBL1sIERHfu
❤❤❤
Thank you so much :))