Hey!! Thanks, we’re glad you like it; yeah… it’s quite the effort for a camper! Worth it? I’m not so sure in this application as we don’t need the strength of the robust nature of the techniques but it does look good!
Now you are finally using the right product!! You just need a crash corse on how not to use the gun!! hahahaha Jokes a part I miss you here to help on the new dream workshop!! 😘
Cheers! The inspiration came from Spirit, they are a little more spacious and we can store more under there! Which in the van is really important for us!!
Always a struggle, I tend to put the mixing cup in a larger cup of warm water 5 mins before mixing and intermittently drip it in when required after the mix. When we filmed this YT was around 3° so temps were easily manageable with the west systems.
Over catalysed resin possibly? Mind you west does have a yellowy pinky tinge when in the pot. But it’s not noticeable on the job usually. You can go for a clear resin but you loose often some bonding properties.
Happy Holidays! So fun to see fellow Van builders with another common affliction: Aluminitus. Mine however are land yachts. A 1965 Sovereign and 1969 Safari -Airstreams. I’m looking forward to your sailboat project but wish you had more time to share more about this van build. So many great ideas and inspiration. I’ll be sure to check out your channel recommendations.
Hey fella! Thanks man, I’m glad you like the van! The boat will be cool when we start the refit as it’s all about new tech, reducing weight whilst still being practical and comfortable!! Should have something in there that you could use in an airstream! Those things are cool!
This is just stunning. The angles seem to create more room than it takes. BTW, I must have said before, but here you go again: you have the best music tracks on UA-cam. Excellent quality. Cheers and happy new year to you both and your friends and family. Twenty twenty five will be awesome.
Hey up bud! Yeah, we’re always kinda surprised with what we’ve squeezed in there! Just like the boats, loads of preparation and thoughts went into the layout! Glad you like the music choice, it’s takes a while to source but we feel it’s a big part of what we do! Roll on ‘25! All the best!!
West System, yes brilliant, been using it for over 25 years. The mixing is consistently reliable and it is to a recognized standard for the governments. We do use a more expensive resin in Carbon work for a higher performance in aviation.
Yeah mate, exactly the same here. We tend to use pro set for carbon, and a mix of other resins for different jobs but west 105 is a go to for general use 👍😀
Hey, sorry man… yeah we’ve got a lot of missed opportunities 😂 I think there’s a kink in the description for you though! If you want to help us, just pop into Patreon, we can also help with more in depth questions there 👍❤️
@@SailHub haha ... i hear you, yet you are doing it. Never mind me, the armchair wise guy lol. Awesome content, great editting and fabricating. I love how you are able to catch your the fabricating road crossings and deliberations! very educational.
Hi guys Great work, Just a heads up the music Is too loud for the level of the voice. Not too bad on a phone I guess, but watching on the tv have to Turn down the volume every Time music comes on. Same thing in the last video. Cheers keep up the good work.
Cheers for that. So difficult! On the numbers it’s pretty good but the problem with music that is not always professionally produced is the LUFS is not always where it should be for social use and we can’t easily adapt for bass treble etc. some systems are just louder in certain frequencies. Believe me! I’m working on it and I really appreciate the feedback - it helps a lot!
Hi again, I’ve just had a watch on UA-cam to see where the issue is and I can’t believe it. The sound is nothing like what we have on our render so I’m going to h e to do some research to see what is happening on upload. Thanks again for the feedback. 👍👊
@@SailHub Yep it happened to me before, and I didn't know about it. Everything sounded great in DaVinci and then on UA-cam music was way too loud. In my case one of the issues were the headphones I was using, a pair of flat studio Headphones helped. In DaVinci you can normalize audio for UA-cam specifically. Cheers. Fair winds.
To be fair, I use it an awful lot. But when we’re filming Jenni and I are always communicating so it kinda gets left behind… not ideal but I can assure you that I usually do 👍 thanks for the concern 👍😊
I love the thought so much... Boat finishes in a van .. so simple yet so .. bloody much work !! Luckily Chris makes it seem so easy
Hey!! Thanks, we’re glad you like it; yeah… it’s quite the effort for a camper! Worth it? I’m not so sure in this application as we don’t need the strength of the robust nature of the techniques but it does look good!
The importance of two comfortable chairs cannot be overstated. Lovely. Enjoy the boat show.
Hey John!! Thanks, and yeah!!! Let’s hope they are as comfy as we hope 🤞
Now you are finally using the right product!! You just need a crash corse on how not to use the gun!! hahahaha Jokes a part I miss you here to help on the new dream workshop!! 😘
😂 good to hear from you guys!
Love the Hallberg Rassy seats!
Cheers! The inspiration came from Spirit, they are a little more spacious and we can store more under there! Which in the van is really important for us!!
Very well done to you both, have a lovely time at the Bells and wishing you fair winds for the year ahead.
9:07 What about Epoxy Temp. When mixing?
The West 105 went yellow on me. Know why?
Hey Chris! Thanks mate! Next years set to be amazing for us, we can’t wait!!
All the best for you too chap!!👊❤️
Always a struggle, I tend to put the mixing cup in a larger cup of warm water 5 mins before mixing and intermittently drip it in when required after the mix. When we filmed this YT was around 3° so temps were easily manageable with the west systems.
Over catalysed resin possibly? Mind you west does have a yellowy pinky tinge when in the pot. But it’s not noticeable on the job usually. You can go for a clear resin but you loose often some bonding properties.
Happy Holidays!
So fun to see fellow Van builders with another common affliction: Aluminitus.
Mine however are land yachts. A 1965 Sovereign and 1969 Safari -Airstreams.
I’m looking forward to your sailboat project but wish you had more time to share more about this van build. So many great ideas and inspiration.
I’ll be sure to check out your channel recommendations.
Hey fella! Thanks man, I’m glad you like the van! The boat will be cool when we start the refit as it’s all about new tech, reducing weight whilst still being practical and comfortable!!
Should have something in there that you could use in an airstream! Those things are cool!
Classy work
Great and talented people
Can’t wait to see the next episode
Thanks Eric!! Thanks for your comment, we’re stoked you approve! See you in the next one😀🤙
She’s coming along looking cool. Looking forward to you at the boat have a great new year.
Thanks!! Yeah, Boot’s a big one alright! Let’s us know if you want anything covering we will see if we can squeeze it in for you!
This is just stunning. The angles seem to create more room than it takes. BTW, I must have said before, but here you go again: you have the best music tracks on UA-cam. Excellent quality. Cheers and happy new year to you both and your friends and family. Twenty twenty five will be awesome.
Hey up bud! Yeah, we’re always kinda surprised with what we’ve squeezed in there! Just like the boats, loads of preparation and thoughts went into the layout!
Glad you like the music choice, it’s takes a while to source but we feel it’s a big part of what we do!
Roll on ‘25! All the best!!
Great stuff and looking forward to more 🙏
Hi Robert, I’m glad you enjoyed it! See you in the next one!
Awesome work, thanks for sharing!!
Waheyyyy! Cheers for that 🤙❤️
West System, yes brilliant, been using it for over 25 years. The mixing is consistently reliable and it is to a recognized standard for the governments. We do use a more expensive resin in Carbon work for a higher performance in aviation.
Yeah mate, exactly the same here. We tend to use pro set for carbon, and a mix of other resins for different jobs but west 105 is a go to for general use 👍😀
Coming along nicely, hope you get it mostly done in time!
Hey Bernie! That’s!!! Oh, we hope so too…. We’re pushing it mind!! That’s for sure!!!
Are you coming to Düsseldorf boat show? We could meet to discuss about the BM’s design, I have good progress recently to share, Happy New Year🎉😊
Hey, for sure we will be there.
Will cool to hear your progress man! Yeah, drop us an email and we can make that happen for sure!
Pleasure watching you guys work. Best of luck in 2025
Cheers Luke! Much appreciated man, have a belter in 25! All the best 👊
ohhh no affiliate link for the pocket hole drill ... missed opportunity... I want one ... and sponsor you guys! :)
Hey, sorry man… yeah we’ve got a lot of missed opportunities 😂
I think there’s a kink in the description for you though! If you want to help us, just pop into Patreon, we can also help with more in depth questions there 👍❤️
@@SailHub haha ... i hear you, yet you are doing it. Never mind me, the armchair wise guy lol. Awesome content, great editting and fabricating. I love how you are able to catch your the fabricating road crossings and deliberations! very educational.
Thanks fella! We literally just filmed this in real time, it was different for us and good fun too 👍
CU at Boot Dusseldorf.. Mike & Debs
Oh yeahhhhhhh!!! Give us a shout! 🤙😀
I use West System slow harder here in the tropics :)
That would make sense! I use it for certain laminations too 👍
Which screws are you using for the pocket holes?
I just use pan head wood screws. Cheap; simple and they work a treat.
Hi guys Great work, Just a heads up the music Is too loud for the level of the voice. Not too bad on a phone I guess, but watching on the tv have to Turn down the volume every Time music comes on. Same thing in the last video. Cheers keep up the good work.
Cheers for that. So difficult! On the numbers it’s pretty good but the problem with music that is not always professionally produced is the LUFS is not always where it should be for social use and we can’t easily adapt for bass treble etc. some systems are just louder in certain frequencies.
Believe me! I’m working on it and I really appreciate the feedback - it helps a lot!
Hi again, I’ve just had a watch on UA-cam to see where the issue is and I can’t believe it. The sound is nothing like what we have on our render so I’m going to h e to do some research to see what is happening on upload.
Thanks again for the feedback. 👍👊
@@SailHub Yep it happened to me before, and I didn't know about it. Everything sounded great in DaVinci and then on UA-cam music was way too loud. In my case one of the issues were the headphones I was using, a pair of flat studio Headphones helped. In DaVinci you can normalize audio for UA-cam specifically.
Cheers. Fair winds.
Are the TREND Screws Like the CRAIG JIG ones? flat heads?
Yeah, they are flat. Mind you I just use pan head screws. £2 for 100 is hard to beat!
Excellent skill … maybe use a face mask sometimes !!!! Hope to see you at the boat show..
To be fair, I use it an awful lot. But when we’re filming Jenni and I are always communicating so it kinda gets left behind… not ideal but I can assure you that I usually do 👍 thanks for the concern 👍😊
My bru. The lighting 😮 horrible to work, but hey, the footage is clean😂
Oh man, it’s absolute nightmare conditions but it’s dry and protected from the wind! And that I’m stoked about, along with the footage! 🤙
Ah up
Ey up!
Merry Xmas guys great video agin
Hey thanks! Merry Christmas to you too and all the best for ‘25!
@@SailHub big push now to Finnish your awsume camper love it ‘
Mega push!! Conditions are harsh and we’re feeling like it’s stacked against us at the moment but we’re pushing through!!! 🤞🙂