If you have time, i'd love to connect with you on your setup. I have almost the same identical setup with the same mixer/equipment but i have some standard mixer questions. If you ever have time to do a tutorial on the Allen and H mixer. How you set up your different mixes, and connect it to a Mac or Ipad it would be super helpful. There aren't many allen and heath video's specific to this, and since you have one of those top quality mixers, it would help us out. If you want to link up direct let me know. Hope to hear from you!
Thanks for this much needed tutorial. I’ve purchased everything you’ve recommended for set up. After setting it up we still ran into an issue. People can not hear the feed on Facebook when the SS mic is muted on my iPad. If I unmute it, they can hear what’s coming through the church mics, AND the iPad (SS). How do I mute switcher without muting the church mics feed? Someone please lend some advice. We’re going to try set up again Saturday morning.
unmute the mic. It mutes itself internally once there is an audio input into the ipad so it will not pic up external sound like a cough or sneeze, etc. The sounds that it picks up is whatever is piped from the soundboard.
Maybe tell us exactly what products you are using? What usb-c hub is on the iPad? (They actually make one with an Ethernet port so you don’t need yet another dongle adapter).
For Better audio switcher pad in front with Pastor and one in back in sound booth would help with sound...plus audio interface should be hooked up to your computer???
Great Job Pastor!! If 9 and 10 are the bus output add another XLR and it would come out stereo, look in the back of the board to see what's connected 9-10 with an XLR to the audio interface :) let me know what you think blessings...
Would be good to see how you switch the audio input with in the studio app. Mine always stays on internal microphone no matter how I connect it to our audio interface.
it would help if you tried to use 2 XLR(microphone) inputs instead of one. the iPad will receive that input as one-side mono input. two input will be left and right. but overall this is a good helpful setup
but if ur looking for upgrading keep any cams with hdmi run that cabel to a siwtcher (i suggest atem mini pro for ur step up that be the best ) connect the switcher via usb cable to lap and stream directly to any soical media platforms and if u wanna show grapics or images just connect any divice to the switcher with hdmi
I have ipad 7 and 9 will getting a lighting to type C adapter will work the same? Plus we also have a presonus studio 24c attached to our iMac. We are looking to use switcher studio and just use iPhones as cameras and get the audio from our presonus... help please
@@Firstbaptistcarrollton I see so you line into the internet hub then line out the control iPad you run SS on? I’m guessing for the cameras lightning to Ethernet cable adapter and then the same lightning or usb c to Ethernet adapter to the ipad?
@@Firstbaptistcarrollton the word bubble where the options are for the transitions, join room, etc..when you’re LIVE, just click that bubble. The comments will come through as you’re LIVE
Sorry I missed this. everything was purchased through amazon. for quicker communication as I miss these comments, you can email me at jaymontgomery@yahoo.com it was a usb-c hub with an audio port, lightning cable port (to charge), and two usb ports
the top row on the back of the mixer are the outputs, the row below that has 10 XLR ports, we're using an open port. For us, it was labeled channel 10. We connected the audiobox to that channel
I have ipad 7 and 9 will getting a lighting to type C adapter will work the same? Plus we also have a presonus studio 24c attached to our iMac. We are looking to use switcher studio and just use iPhones as cameras and get the audio from our presonus... help please
@@Firstbaptistcarrollton I have ipad 7 and 9 will getting a lighting to type C adapter will work the same? Plus we also have a presonus studio 24c attached to our iMac. We are looking to use switcher studio and just use iPhones as cameras and get the audio from our presonus... help please
Good Evening, what is the name of the port which will allow me to charge and get sound, I have the one port from Apple, but need to charge the pad while streaming...
So you connect the audio interface to any channel? I got a peavey mixer for our church and also can you control instruments sounds coming out of switcher studio?
Sorry. Im not sure. I don’t know a lot about mixers but through several trials and errors and watching UA-cam videos, that’s how I learned about our system. I followed up it’s recorded audio, going back and tweaking different things to get the best possible sound for our set up. Hope that helps but sorry I don’t have more information than that. Grace, Jay
This was very helpful! Thank you! What is the name of the audio box that you were referring to? Did you have to create the mix on your QU-32 for channel 10? If so, how did you create the mix?
Presonus AudioBOX USB 96 Yes we created the mix and have settled in nicely the last several weeks with no issues. Im sorry I miss comments on here but for quicker correspondence shoot me an email and I may be able to help with more details or videos. jaymontgomery@yahoo.com
Correct. Wifi caused too many glitches. I will add that once each device is hardwired in order for it not to bump into default and try to connect to an external Wi-Fi router, turn off Wi-Fi for each device. We had to learn this as even though we were hardwired with ethernet we were still having glitches with latency and it was because they were defaulting to Wi-Fi even though we are attached to ethernet. By researching, I found out that each device had to be turned off individually for Wi-Fi
Great video! Are you still using your projector during service? I have the switcher studio app for my church, and I’m trying to figure out how to display the service on the screens. Please let me know if u have any suggestions. Thank you.
on the back of our mixer, we have 3 rows of ports. Im not fluent in the verbage of a mixer but the top row in the back of our mixer is designated mic (several channels) the second row are ports for xlr cables. The second row receives male ports. The bottom row has the fewest number of "channels" and we are plugged into #10 (an open channel for us) The xlr cable from the audiobox has a "receiving" port at its end and we plug that into the designated channel. Sorry, if anyone else can elaborate or articulate better, please assist.
We got away from Wi-Fi and we have it directly wired into the iPad from an ethernet cable adapter. Wi-Fi was too unpredictable with freezing and not giving solid connections
you will not because all audio is coming from the mix from the soundboard. connecting additional iphones/sources are video only I believe. We use 3 sources. 2 ipads and 1 iphone. The iphone is our main video source. All sources can be connected via wifi but we found that the quality is much better if they are hardwired via ethernet cable. By having the main Switcher Studio ipad connected to the soundboard, all audio comes from their and not the ipads or iphones. There may be a way to do it but that's someone else expertise and probably a completely different video.
Hello to be honest i really love this app but i don't have the money to subscribe to more services please can you kindly provide me with one ? I just need one with no subscription request Please God bless you 🙏
Thank you for your in-depth explanation of your set up as well as going through some of your challenges. I found it very helpful. Thank you!
Great video. Very helpful. We just just stared using switcher studio too for my church. Thank you for the information
Thanks! This was incredibly helpful. My issue has been not knowing the terminology 🤦🏽♀️. This video has been a hame changer. THANKS!!!
From knucklehead to knucklehead. Explained clearly. Thank you!
If you have time, i'd love to connect with you on your setup. I have almost the same identical setup with the same mixer/equipment but i have some standard mixer questions. If you ever have time to do a tutorial on the Allen and H mixer. How you set up your different mixes, and connect it to a Mac or Ipad it would be super helpful. There aren't many allen and heath video's specific to this, and since you have one of those top quality mixers, it would help us out. If you want to link up direct let me know. Hope to hear from you!
Thanks for this much needed tutorial. I’ve purchased everything you’ve recommended for set up. After setting it up we still ran into an issue. People can not hear the feed on Facebook when the SS mic is muted on my iPad. If I unmute it, they can hear what’s coming through the church mics, AND the iPad (SS). How do I mute switcher without muting the church mics feed? Someone please lend some advice. We’re going to try set up again Saturday morning.
unmute the mic. It mutes itself internally once there is an audio input into the ipad so it will not pic up external sound like a cough or sneeze, etc. The sounds that it picks up is whatever is piped from the soundboard.
Maybe tell us exactly what products you are using? What usb-c hub is on the iPad? (They actually make one with an Ethernet port so you don’t need yet another dongle adapter).
Thank the lord someone who gets to the point.
For Better audio switcher pad in front with Pastor and one in back in sound booth would help with sound...plus audio interface should be hooked up to your computer???
Great Job Pastor!! If 9 and 10 are the bus output add another XLR and it would come out stereo, look in the back of the board to see what's connected 9-10 with an XLR to the audio interface :) let me know what you think blessings...
Great video. Maybe invest in Ethernet clips that manage the Ethernet cabling. That duct tape scares me! ;-)
Would be good to see how you switch the audio input with in the studio app. Mine always stays on internal microphone no matter how I connect it to our audio interface.
Which audio interface do you have?
it would help if you tried to use 2 XLR(microphone) inputs instead of one. the iPad will receive that input as one-side mono input. two input will be left and right. but overall this is a good helpful setup
This video has help so much, thank you.
but if ur looking for upgrading keep any cams with hdmi run that cabel to a siwtcher (i suggest atem mini pro for ur step up that be the best ) connect the switcher via usb cable to lap and stream directly to any soical media platforms and if u wanna show grapics or images just connect any divice to the switcher with hdmi
also for the aduio connect mixer to that audio interface or sound card to the switcher and audio will be the best for the viewers
Can you show where do you conect the audio interface to mixer, what kind cable is, or where do you conect? in main out?
Thank you so much for this video. We have had similar struggles and this video helps a lot. Blessings!!
youre welcome.
Thanks for your help, interesting video what streaming software do you use, it looks like VMix?
I have ipad 7 and 9 will getting a lighting to type C adapter will work the same? Plus we also have a presonus studio 24c attached to our iMac. We are looking to use switcher studio and just use iPhones as cameras and get the audio from our presonus... help please
What parking KY are you in
Great video so I’m assuming you hardwire the cameras? Do you plug them into your internet hub? Or the usb c port?
thnx. Yes, hardwired into a 4 or 5 port ethernet hub, one cable goes from the ethernet hub to the usb-c hub into the SS Ipad
@@Firstbaptistcarrollton I see so you line into the internet hub then line out the control iPad you run SS on? I’m guessing for the cameras lightning to Ethernet cable adapter and then the same lightning or usb c to Ethernet adapter to the ipad?
@@DavidBrackett385 correct
@@Firstbaptistcarrollton thank you for taking the time to respond!
@@DavidBrackett385 no problem
Thank you for a look inside with language I can understand!
Try the zoom H6 ( would been perfect for that whole set up
Where are you located?
Hi where did you get the adapter for the iPad to make it hard wired and the additional ports?
you can use a phone or ipad for that mixer/soundboard so you dont have to use tape for the names
.
Could you link all the components and or equipment
Is the audio mixer plugged in to any open spot on the board?
You can also check FB comments from the switcher as well
Where would that appear? Ive been logging into my phone and watching the livestream via the phone in order for interactions...
@@Firstbaptistcarrollton the word bubble where the options are for the transitions, join room, etc..when you’re LIVE, just click that bubble. The comments will come through as you’re LIVE
@@EchoRhythmMusic great Thank you
Hey awesome video very helpful. We have this distorted sound would it be from the WiFi connection or the in interface?
What’s the link for the port you have plugged to your iPad I think you. Alex it a usb port?
www.amazon.com/Adapter-Headphone-Control-Charging-Earphone/dp/B087BTVJX6/ref=asc_df_B087BTVJX6/?tag=hyprod-20&linkCode=df0&hvadid=459410835726&hvpos=&hvnetw=g&hvrand=12223624134704896320&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9014394&hvtargid=pla-966959867234&psc=1
where did you find the interface or the connection hub in order to get your sound from the mixer and keep the iPad charging?
Sorry I missed this. everything was purchased through amazon. for quicker communication as I miss these comments, you can email me at jaymontgomery@yahoo.com it was a usb-c hub with an audio port, lightning cable port (to charge), and two usb ports
How app you use thank
I’m in Lexington .. have anymore questions ask
Where do you plug the xlr wire in the back of the mixer? Thank you
the top row on the back of the mixer are the outputs, the row below that has 10 XLR ports, we're using an open port. For us, it was labeled channel 10. We connected the audiobox to that channel
You are indeed a God send
What model of ipad is it. The air or the pro.
pro
Hey, thanks great video.. Plse can you tell me the make and model of the USB C Hub you use?
It’s a hyperdrive, I bought one for my new MacBook. They run about $60-$100. I would go for the 7 in 1 instead of the 6 in 1.
www.amazon.com/Adapter-Headphone-Control-Charging-Earphone/dp/B087BTVJX6/ref=asc_df_B087BTVJX6/?tag=hyprod-20&linkCode=df0&hvadid=459410835726&hvpos=&hvnetw=g&hvrand=15778380344856736270&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9007503&hvtargid=pla-966959867234&psc=1
www.amazon.com/gp/product/B0816SBM5M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I have ipad 7 and 9 will getting a lighting to type C adapter will work the same? Plus we also have a presonus studio 24c attached to our iMac. We are looking to use switcher studio and just use iPhones as cameras and get the audio from our presonus... help please
@@Firstbaptistcarrollton I have ipad 7 and 9 will getting a lighting to type C adapter will work the same? Plus we also have a presonus studio 24c attached to our iMac. We are looking to use switcher studio and just use iPhones as cameras and get the audio from our presonus... help please
Great explanation!
Can you list your equipment?
This is God's work!
How did you remove the audio of the ipad? I can still hear the audio coming from the ipad
If you are connected to the soundboard it should by default mute the ipad and only use the soundboard mix for the audio. (I believe)
Good Evening, what is the name of the port which will allow me to charge and get sound, I have the one port from Apple, but need to charge the pad while streaming...
It’s an adapter called a usb-c port. It gets plugged into the iPad and through it you can plug everything else into it
So you connect the audio interface to any channel? I got a peavey mixer for our church and also can you control instruments sounds coming out of switcher studio?
correct. One of our band members who is more familiar with soundboards/channels plugged us into an open channel.
Can I send a stereo mix using two channels outputs from my board to the interface and then to the ipad??
Sorry. Im not sure. I don’t know a lot about mixers but through several trials and errors and watching UA-cam videos, that’s how I learned about our system. I followed up it’s recorded audio, going back and tweaking different things to get the best possible sound for our set up. Hope that helps but sorry I don’t have more information than that. Grace, Jay
I really need more detailed info
Este aparelho serve pra que?
This was very helpful! Thank you! What is the name of the audio box that you were referring to? Did you have to create the mix on your QU-32 for channel 10? If so, how did you create the mix?
Presonus AudioBOX USB 96 Yes we created the mix and have settled in nicely the last several weeks with no issues. Im sorry I miss comments on here but for quicker correspondence shoot me an email and I may be able to help with more details or videos. jaymontgomery@yahoo.com
@@Firstbaptistcarrollton Hi
Friend I have an aerocaster but videos whit 3 minutes no up, why no Icant,
Great job!
Hi. Do you hardwire your iphones (cameras) to ethernet and your ipad (switcher)?
Correct. Wifi caused too many glitches. I will add that once each device is hardwired in order for it not to bump into default and try to connect to an external Wi-Fi router, turn off Wi-Fi for each device. We had to learn this as even though we were hardwired with ethernet we were still having glitches with latency and it was because they were defaulting to Wi-Fi even though we are attached to ethernet. By researching, I found out that each device had to be turned off individually for Wi-Fi
Great video! Are you still using your projector during service? I have the switcher studio app for my church, and I’m trying to figure out how to display the service on the screens. Please let me know if u have any suggestions. Thank you.
You can give me a call at the church and I’ll try to answer your question as best as I can. 502-732-4396
What is that deal that holds your ipad? Do you have a link to that, please?
www.amazon.com/gp/product/B073WHV11Z/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Price
which ipad ur using
ipad Pro(11-in) (2nd Gen)
Simple and informative, thanks !!
Have a question? Where in the mixer is the audio box connected? Anyone ?
on the back of our mixer, we have 3 rows of ports. Im not fluent in the verbage of a mixer but the top row in the back of our mixer is designated mic (several channels) the second row are ports for xlr cables. The second row receives male ports. The bottom row has the fewest number of "channels" and we are plugged into #10 (an open channel for us) The xlr cable from the audiobox has a "receiving" port at its end and we plug that into the designated channel. Sorry, if anyone else can elaborate or articulate better, please assist.
thanks
with your wifi is that directly connected to the iPad?
We got away from Wi-Fi and we have it directly wired into the iPad from an ethernet cable adapter. Wi-Fi was too unpredictable with freezing and not giving solid connections
I connect another iPhone source I don’t get audio.
you will not because all audio is coming from the mix from the soundboard. connecting additional iphones/sources are video only I believe. We use 3 sources. 2 ipads and 1 iphone. The iphone is our main video source. All sources can be connected via wifi but we found that the quality is much better if they are hardwired via ethernet cable. By having the main Switcher Studio ipad connected to the soundboard, all audio comes from their and not the ipads or iphones. There may be a way to do it but that's someone else expertise and probably a completely different video.
Oh i see now. Thanks. I did found a couple adapters that will let me bring in audio from another device like iPhone while recording on another iPhone
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks
ASHQUE PAVRKLA
Hello to be honest i really love this app but i don't have the money to subscribe to more services please can you kindly provide me with one ? I just need one with no subscription request Please God bless you 🙏