Optimizing Stereo Arrangement on the Blister Machine: A Step-by-Step Guide
Вставка
- Опубліковано 11 лют 2025
- Welcome to our instructional video on arranging the stereo on your blister machine for optimal performance. Whether you're a novice or seasoned professional, mastering this aspect of machine setup is crucial for efficient production and high-quality output.
In this comprehensive tutorial, we'll walk you through each step of the process, from understanding the components of the stereo to properly aligning and securing it within the machine. Our expert tips and tricks will help you avoid common pitfalls and ensure smooth operation.
By following our guidance, you'll not only enhance the performance of your blister machine but also increase productivity and minimize downtime. Don't let stereo arrangement be a source of frustration - watch our video and streamline your production process today!
blister machine setup
blister sealer machine
blister machines
blister card sealing machine
blister card machine
automated blister packaging machine
manual deblistering machine
c mac blade sterilization
blister c section incision
de-blister machine
ez blister
hpc blitz machine
hollister-whitney machine manual
jet jbm-5 manual
koch blister packaging machine
blister package opener
blister pack opener
pill blister pack machine
qlicksmart blade flask
qlicksmart blade remover
qlicksmart blade removal system
blister sealer
t slot cleaner blueprint
u b machine
blister x
z-machine specification
z-machine standards document
blister pack sealer
bissell 2-in-1 lift-off manual
how to use bissell 3 in 1 stair tool
Blister machine
Stereo arrangement
Machine setup
Production efficiency
Quality output
Machine components
Alignment
Tips and tricks
Productivity
Downtime minimization
Machine operation
Packaging equipment
Pharmaceutical packaging
Manufacturing
Industrial machinery
How-to guide
Step-by-step
Packaging process
Equipment maintenance
Troubleshooting
Operator training
Automation
Packaging industry
Machinery optimization
Blister packaging
Production line
Assembly
Manufacturing efficiency
Operating procedures
Technical guide
Equipment setup
Machinery calibration
Production standards
Tooling
Packaging solutions
Sterile packaging
Equipment reliability
Operational excellence
Industrial engineering
Machinery safety
Calibration techniques
Production optimization
Pharmaceutical industry
Machinery inspection
Quality control
Precision engineering
Machine alignment
Performance enhancement
Machine maintenance
Mechanical engineering
Product inspection
Automation technology
GMP (Good Manufacturing Practices)
Blister forming
Industrial technology
Machinery efficiency
Tool maintenance
Production scheduling
Material handling
Process improvement
Machine troubleshooting
Machine reliability
Sterile packaging processes
Packaging line
Line efficiency
Packaging validation
Packaging regulations
Equipment optimization
Packaging materials
Pharmaceutical manufacturing
Production planning
Packaging design
Operator efficiency
Machinery setup
Packaging standards
Sterility assurance
Production control
Pharmaceutical production
Machine operation techniques
Equipment performance
Production monitoring
Equipment inspection
Packaging automation
Machine care
Packaging innovation
Machine calibration
Packaging quality
Operator safety
Packaging technology
Packaging efficiency
Packaging validation
Sterilization processes
Equipment setup guide
Packaging best practices
Packaging regulations
Quality assurance
Packaging inspection
Machine optimization techniques
Packaging productivity
#StereoArrangement
#BlisterMachine
#MachineSetup
#OptimalPerformance
#InstructionalVideo
#ProductionEfficiency
#HighQualityOutput
#MachineAlignment
#StereoComponents
#MachineMaintenance
#ExpertTips
#MachineOperation
#ProductivityBoost
#DowntimeMinimization
#ProfessionalTips
#EfficientProduction
#StereoAlignment
#StereoSecuring
#StreamlineProcess
#ProductionTips
#StereoTutorial
#BlisterPackaging
#ProductionLine
#MachineMaintenance
#EquipmentSetup
#StereoGuide
#OptimizePerformance
#ExpertAdvice
#ProductionQuality
#ManufacturingTips
#StereoExpertise
#IndustrialMachinery
#MachineEfficiency
#StereoSetup
#BlisterPack
#MachineInspection
#StereoSecuring
#MachineCalibration
#ProductionProcess
#StereoPerformance
#MachineTips
#ProductionLineTips
#ManufacturingProcess
#StereoOperations
#StereoTutorial
#BlisterMachineTips
#StereoAlignmentTips
#ProductivityHacks
#StereoAlignmentGuide
#ProductionOptimization
#MachineSetupTips
#StereoMaintenance
#MachinePerformance
#BlisterMachineSetup
#ProductionStreamlining
#MachineOperationTips
#StereoAdjustment
#StereoTechniques
#BlisterPackTips
#StereoTraining
#MachineExpertise
#ProductivityBoosting
#StereoEfficiency
#MachineAlignmentTips
#BlisterProduction
#StereoTechniques
#ProductionTraining
#MachineTraining
#StereoSetupTips
#BlisterPackTraining
#ProductionQuality
#StereoSkills
#BlisterMachineSkills
#MachineSkills
#StereoKnowledge
Gjb sir ji
Nice one. 45 and 72 is no. Of teeth on Small gear and big gear correct? And this are printing gear ?
Yes, correct
Sir pocke number se gear nikalne ka farmula bataa dijiye sir
Us par bhi video banata hu
Hello sir 🙏
Elmach pack blister 2000 and 2500 ke cutting gear and printing gear kaise nikalte h agar hamko sirf number of pack ka pata ho
Bahut jaldi is topic par video aayegi
Aap ke saare doubt clear ho jaayega
Thanks for watching 👀 🙂
Cutting gear aur printing gear ka formula kya hai
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
Yrr aisa nhi hai
Gear kaise pta kre kis forming pe kon sa gear lagega
Uska ek alag video banata hu
Aise formule se aap ko samjh nahi aayega
Strip machine ke cutting gear ka kya formula rehta h sir....please describe. .
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
300 ki machine me 90 ke center me Pocket size 98×40 hai to kitne stereo (#size) chahiyeaur gear konse lagege?
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
Sir blister machine ka cutting gear kese nikalte hai. Please bataye
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
@@PHARMAACQUAINTANCE sir ye pata kese chalega ki kon se set par kon sa gear lagega.aur printing gear aur cutting gear kese ka pata kese lagega ki kis set par kon sa gear lagega.please batayen.hamara forman kuchh batate nahi hai...
Bhai menn gear ka btao n
Okay 👍
Hello sir, blister m/c ka gear ka formula batayege sie
Ok I will do and make a new video
Thanks for watching and support
Kulbendra kopney gear nikalne ka formula batay sahab thanks
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
Video banaye sir jaise sterio ki bnyi
Bhai gear kon sa lagega vo bta do
Pta kaise kre sir
Uspar likha hoga
Blister ke main gear ka formula batao sir. Jo m/c ke andar hote hai 2 gear.
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
@@PHARMAACQUAINTANCE thankyou sir❤️
Sir request for cutting or printing ka please one small viedo clip
As soon as possible
Sir ink na fahle kya kare
Replace your Printing drum also replace the Roller Pad
In strip you can change the stereo
45 bala kaise pta krenge
Count kar sakte ho
Good work Anna ❤❤
Thanks dear
Hello sir cutter gear ka formula bataye sir
I will try to make a video
Hello Sir, India ka Sar ko pata laga Kya?
Bata De Ne mujhe
mobile number share karo
Ger ke hisab se pinting dham ke se nikal na he
Hii
Hello thanks for watching the video
Hello sir aap se bat karna hai
Ji aap kar sakte hai
My whatapp no 9760885353
Gear ke formula
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
Very good sir ji
Thanks
Sir blister machine की जानकारी दे
ok we will try in Next video
Bhai itna mehnat kiun Issey achcha farmula hota hai aur aasan
Kuch logo ko aise hi samjh aata h Bro
Very good
Thanks
Thanks sir
Welcome
Bahut badiya sr aapka no. Mil sakta h sr.plz
Yes
9760885353
Sir blister main gear kaise nikalte hai
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understand well......Thanks for watching
Sar ji help kiye the aapki
Kaise kiye the
Amazing knowledge sir......thank you so much
Thanks
Stereo to stereo gap how to come...
Uska ek alag video banauga
To banao na sir jaldi@@PHARMAACQUAINTANCE
Sir apka formula galat he
Ho sakta hai
Aap Pehle gear ⚙️ bhi calculate kar sakte h
Dono hi method h
Gear se stereo ya stereo se gear
But thanks for watching my video
Sir jab galt formula hai bolta hai log tab aap ak printig gear jaisa chhoti vidio banaiye sir
ok i will try
Please consider number send kriye sir
But why.
9760885353
Hii sir
Hello
Sar Gair Kaise nikaalenge Chhota Bada yah batao
The blister cutter gear formula in a blister packing machine is essential for determining the gear ratio required for cutting blisters accurately. Here's a general formula:
Blister Cutter Gear Formula:
The formula for calculating the gear ratio R needed for the blister cutter in a blister Packing machine is:
R=Np X Nm/Nc X Ns/Nf
Where:
R=Gear Ratio
Np=Number of teeth on the pinion gear (drive gear on the motor shaft)
Nm= Number of teeth on the driven gear (connected to the pinion)
Nc= Number of teeth on the crankshaft gear (connected to the cutting mechanism)
Ns = Number of strokes per minute (desired cutting speed)
Nf= Frequency of the machine (cycles per minute)
Explanation:
Np x Nm is the gear ratio between the motor shaft and the driven gear.
Nc is the gear ratio between the driven gear and the crankshaft gear.
Ns is the desired cutting speed in strokes per minute.
Nf is the frequency of the machine, which is cycles per minute.
Let's say:
Np=20 (teeth on the pinion gear)
Nm=80(teeth on the driven gear)
Nc=60 (teeth on the crankshaft gear)
Ns=100 (desired cutting speed in strokes per minute)
Nf= 120(frequency of the machine, cycles per minute)
R=20x80/60 x 100/120
R=22.67 x 0.833
R=22.23
So, in this example, the gear ratio R needed for the blister cutter would be approximately 22.23.
This formula helps ensure that the cutting mechanism moves at the desired speed and is synchronized with the machine's operation. Adjustments to these parameters can be made based on the specific requirements of the blister packing machine.
I hope you are understandable well......Thanks for watching
Bhai galat method Hai Iske Chakkar me Na Pado Me Kisi Ka Dushman Nahin hun yah galat hai jo yah Bata rahe ha method isase Poochho ki Chhota Gair 45 ka Kaise nikala bhai gairo Se Mat Nahi nikalte mat se Gair nikalte Ha
Bhai yahi method hai, big gear or small gear se hi calculate karte hai
Book me bhi yahi likha h
Bhai study kar ke hi video banaya h...
Aap bhi ek baar check karo
@@PHARMAACQUAINTANCE
To Fir aap bata sakte ho ki small gear 45 sthit ka hi Kyu laga
@@PHARMAACQUAINTANCE bhai me blister machine ka hi opreator hu
Bhai me bhi QA manager hu
@@PHARMAACQUAINTANCE Agar bhai 45 and 72 ka Gair nahi mila to kaun sa Gair lagaoge Pata ha Kuchh