Great work . The old 308 is very underrated for what you can get from a basic standard motor and yours is close to mine but i have dish pistons with zero deck and 100 thou of the heads . ive run 12.26 &109 with no port work just a L34 intake valve standard exhaust valve and 236/242 solid comp cams and a 650 holley with a auto . I do have 4.44 gears and a big convertor . There a awesome little motor .
That's awesome, it’s a fun little combo. I'm definitely keen to see what this one can do on a real drag strip. I’ll drive it down to heathcote some day and have a crack.
That combo reminds me of mine from years ago, std short unbalanced, 60 over cast dish tops, bud flat tappet 224/.490 110° single pattern cheapy cam, std unported small valve hq heads, 3500 stall and 3.9 welded sunbird diff went 12.6@104 with std rockers and points dizzy, tried rollers and HEI and went 12.50@105.5 hard to beat bang for buck
Love your vids. Just did a binge on them. It’s funny watching knowing where you are( I’m a Wodonga local). Anywho just wanted to know what trans your running. I’ve got an EH with a 253 running an Aussie 4 speed and am looking for a 5 speed conversion that’s not to expensive.
I had a fibreglass T bucket with a 289 FMX 600 double pumper cusso diff etc that ran 11 seconds so you running 16 seconds like you did is not too shabby I also got a VH 44 from Echuca on my EH and it does a great job keep up the good work Phil also in Albury
Love it! Everyone seems to have an old Torana memory. I’d love to be able to use this channel to take people for a few joyrides and re live them memories!
Yeah, they definitely do. I'd like to swap it over for a track day or dyno run and see what difference it makes now. i haven't run the double pumper since doing the roller cam conversion. for 90% of my driving im happy with the quaddy's performance and economy though
Nice one mate. Good to see that the engine is maintaining good temp. what is your thermo fan set up please. Looking to help a mate upgrade his 308/355 combo. Cheers 👍
@@micksss7444 I have a trimmed down el/ au falcon twin thermo setup that just fits between the rails with a few relays and one of them old Davies Craig adjustable thermo switches and I think a vn commodore v6 alloy radiator. I’ve noticed if I tow my little caravan on a hot day it’s right at the tipping point where if I’m going uphill it’ll start to rise and then drop again when I hit the flat so maybe a thicker core radiator would be better.
I have a quadrajet on a 350 in a HQ. Its by far the best driving and power carb I've ever fitted, but I also have the fuel starvation issues. Comes and goes. It also had a flooding issue when we tested it on the dyno, fuel started pouring out the bowl breather above 5k. Now using a fuel bypass return to tank system, fixed the flooding, but can still run dry if I nail it, sometimes! I might try raising the bowl level, see how it goes. The quadrajets definitely need a bigger bowl. And yeah, getting that top back on is a bitch.
@ I’ll take it to the strip or measure it out and time with a stopwatch and run it either 1\8 or 1/4 whenever I get a chance but for now I reckon that feels reasonably accurate. I have a low 11 sec gasser and the torana definitely isn’t that quick.
@@gazza116 I replaced the fuel pump a while back and it was over pressurising the carb. I lowered the float height to try and stop it flooding at idle but have since fitted a regulator and raised the float level again and it seems happy now
@@gazza116 I replaced the fuel pump a while back and it was over pressurising the carb. I lowered the float height to try and stop it flooding at idle but have since fitted a regulator and raised the float level again and it seems happy now
@@TasTuned When you had the top of the carb off, noticed the fuel bowl was really small like low volume the way its tucked in between the primary barrels like that. Cars were fun to work on in those days, when I was a mechanic, but would want to work on todays cars.
Great work . The old 308 is very underrated for what you can get from a basic standard motor and yours is close to mine but i have dish pistons with zero deck and 100 thou of the heads . ive run 12.26 &109 with no port work just a L34 intake valve standard exhaust valve and 236/242 solid comp cams and a 650 holley with a auto . I do have 4.44 gears and a big convertor . There a awesome little motor .
That's awesome, it’s a fun little combo. I'm definitely keen to see what this one can do on a real drag strip. I’ll drive it down to heathcote some day and have a crack.
That combo reminds me of mine from years ago, std short unbalanced, 60 over cast dish tops, bud flat tappet 224/.490 110° single pattern cheapy cam, std unported small valve hq heads, 3500 stall and 3.9 welded sunbird diff went 12.6@104 with std rockers and points dizzy, tried rollers and HEI and went 12.50@105.5 hard to beat bang for buck
Love your vids. Just did a binge on them. It’s funny watching knowing where you are( I’m a Wodonga local). Anywho just wanted to know what trans your running. I’ve got an EH with a 253 running an Aussie 4 speed and am looking for a 5 speed conversion that’s not to expensive.
Never late in a 308.
And the smooth thumpy sound never gets old.
Sounds nice, beautiful lumpy idle, can’t beat an old school V8.
Another great video , have a good one , Cheers Russell
@@RussellAdams-g1v thanks Russel
I had a fibreglass T bucket with a 289 FMX 600 double pumper cusso diff etc that ran 11 seconds so you running 16 seconds like you did is not too shabby I also got a VH 44 from Echuca on my EH and it does a great job keep up the good work Phil also in Albury
One of the first cars I ever drove on a public road was an slr 5000 still remember the push in the back from old 308.
Love it! Everyone seems to have an old Torana memory. I’d love to be able to use this channel to take people for a few joyrides and re live them memories!
308's respond well to a 650 double pumper holley everyday of the week.
Yeah, they definitely do. I'd like to swap it over for a track day or dyno run and see what difference it makes now. i haven't run the double pumper since doing the roller cam conversion. for 90% of my driving im happy with the quaddy's performance and economy though
@TasTuned 👍
Very realistic results
Not bad for 308 mate.
Prep track in the 12s good luck.
Nice video mate! That shirt you put on your arm looked like a mudrun shirt!
@@Pepper_brooks haha bingo!!! I can’t wait to get back there again this year 👌🏼
@ me too! Love the mudrun
13.5 seconds 1/4 mile, isn’t bad. Better rear tires, should help.
Nice one mate. Good to see that the engine is maintaining good temp. what is your thermo fan set up please. Looking to help a mate upgrade his 308/355 combo. Cheers 👍
@@micksss7444 I have a trimmed down el/ au falcon twin thermo setup that just fits between the rails with a few relays and one of them old Davies Craig adjustable thermo switches and I think a vn commodore v6 alloy radiator. I’ve noticed if I tow my little caravan on a hot day it’s right at the tipping point where if I’m going uphill it’ll start to rise and then drop again when I hit the flat so maybe a thicker core radiator would be better.
@@TasTuned Cheers mate, much appreciated.
Sounds so crisp, You've built a really nice true street car, can't wait for the next torana build 💪🏻
Hopefully it’ll be a blow thru turbo 202 lj coupe!
I have a quadrajet on a 350 in a HQ. Its by far the best driving and power carb I've ever fitted, but I also have the fuel starvation issues. Comes and goes. It also had a flooding issue when we tested it on the dyno, fuel started pouring out the bowl breather above 5k. Now using a fuel bypass return to tank system, fixed the flooding, but can still run dry if I nail it, sometimes! I might try raising the bowl level, see how it goes. The quadrajets definitely need a bigger bowl. And yeah, getting that top back on is a bitch.
@@GlennLittleford haha glad to know I’m not alone.
Is that a crankshaft rolling around in the back? 1/2 inch lines 750dp had to do this after roller cam and vn head conversion
Haha yes…. 🤦🏼♂️. I had gone and picked up some of my old ls1 parts to throw together a short block and tested it out on the way home.
oops mid 13s very cool I was running 11s at 205 kph
What app did you use for the quarter mile testing?
I just found one called race stats
All the phone apps should be taken as a very rough guide only as your phone's GPS only updates no faster than once per second.
@ I’ll take it to the strip or measure it out and time with a stopwatch and run it either 1\8 or 1/4 whenever I get a chance but for now I reckon that feels reasonably accurate. I have a low 11 sec gasser and the torana definitely isn’t that quick.
I managed 16 flat in my 253 4 speed hq panelvan
Yeah 16 wasn’t cutting it! Haha. Luckily raising the float level helped it go mid 13s
@@TasTuned that's awesome love the content !
check fuel pump flow.
@@gazza116 I replaced the fuel pump a while back and it was over pressurising the carb. I lowered the float height to try and stop it flooding at idle but have since fitted a regulator and raised the float level again and it seems happy now
@@gazza116 I replaced the fuel pump a while back and it was over pressurising the carb. I lowered the float height to try and stop it flooding at idle but have since fitted a regulator and raised the float level again and it seems happy now
16 seconds.....the crankshaft in the back doesnt help.
@@RIPPERTON half an engine in the back 🤣. The fuel system tweaks and slightly less weight in the back helped it pick up 2.5 seconds. 👌🏼
@@TasTuned When you had the top of the carb off, noticed the fuel bowl was really small like
low volume the way its tucked in between the primary barrels like that.
Cars were fun to work on in those days, when I was a mechanic, but would want to work on todays cars.
Yeah it’s the one downfall of the quadrajet that limits its power I think. It seems to keep up ok now with the raised float level so I’m happy.