Mistry MakeTool No God But God... 🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Good idea.. My suggestion is to use plastic or rubber sleeves in the holes where the ropes passes, so I'd avoids cutting of ropes due to sharp edges of metal... It overall increases the life of ropes...
Nice idea. But instead of using a single rope, use individual ropes and tighten each one separately. Otherwise it will sag too much and the nylon ropes will be cut at the holes. Drilled hoses usually have jagged surfaces on the inside.
Good job 👍👍 sir I am moli Singh from Ludhiana India Big fan 👌😎👌 I am inspired by your videos and make my own UA-cam channel Anyway thanks for sharing video
Probably better to let the rain just run through the tube when it is vertical so it doesn’t rust out. I have seen the ends of tubes rust out around the plastic end caps because water gets trapped between the steel and the plastic. The tube he used is thick wall it won’t rust out very quickly.
@@JWB671 i was also feeling like to use rubber caps for better finishing... but i get your point also so i am going to use removable caps for my diy 😀😀 thanks 🤭
Düşünce ve işcilik güzel,ama ölçü çok uzun olmuş.Tam ortaya bir tane daha demir aparat olması lazımdı,zira çamaşır asınca sarkmalar olacaktır.İyi günlerde kullanmanız dileğiyle :)
The edge of the falling metal tube needs some soft padding. It is at the corner of a turn and will hurt people. Also while people lift clothes to dry, it may hit them on the head. Good idea, but needs to be made safer.
I would make the hole in the square pipe at fulcrum point as a slot. That way in raised position it can slide down a bit and prevent dropping down on its own. Consider it as a safety feature. All one would need to do is to raise the pipe may be half an inch and swing it down to usable aspect.
Would be great if he made that foldable arm rack with an extra arm 90 degrees. So when you don’t need that cloth drying rack you can push it up and bring up the other rack where it could be a rain or sun shade. Great job.
I loved the wheel and pulley method (high ceiling)or( side wall) more than this.I know the pain and pleasure we get while doing it,becoz i too have done it.
Stainless Steel string is also available encaseed rubber pipe is very strong and long lasting. But this design good, must be very expensive for such job.
Где-то в помещении согласен а на улице стену протирать чистым бельём и можно сваркой большинство работы сделать, ведь приспасоба не нуждается в запчастях.
@@hamedmusun, Clear, but well if there is no wind And if the breeze blows, the sheets will still slap on the concrete. I do not argue for the lack of better your idea is good.
@@Alexsoft76 , у меня тоже дохрена таких БОЛТОВ ( в магазине все есть), но есть рационал... Даже в наших, Российских условиях, дешевле купить сварочный, чем все садить на болты.... ;) Автор канала конечно молодец, столько хороших идей и решений,я просто предложил дешевле вариант.
Может у него тупо сваркафобия :-). Я тоже преподчитаю варить, если надо сделать надёжный и не раздельный узел. А раньше не было сварки, так тоже, сверлили, нарезали резьбу, садили на винты и болты.
For Dimension And More Details :- mistrymaketool.com/homemade-foldable-clothes-drying-rack/
Bhai rassi kitni lambi honi chahiye
Mistry MakeTool No God But God... 🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Syper!!!
Can please make one for me, I liked the idea. 6362689353
Cost pls
Good idea.. My suggestion is to use plastic or rubber sleeves in the holes where the ropes passes, so I'd avoids cutting of ropes due to sharp edges of metal... It overall increases the life of ropes...
khudka aisa banana or isme lagana rubber sleeves
You said thanks for watching, I would like to say in return thanks for sharing this idea .
Nice idea. But instead of using a single rope, use individual ropes and tighten each one separately. Otherwise it will sag too much and the nylon ropes will be cut at the holes. Drilled hoses usually have jagged surfaces on the inside.
شكرا لكم على هذه الفكره
لقد قمت بإنشاء مصنع بعد مشاهدة لهذا المقطع
والأن انا أنتج هدا المنشر وأورده إلى السوق
شكرا لكم مجددا.
This DIY I like the most which is need of every home now a days
Aise aise log bhi h jo itne mast inventions ko bhi unlike kr rha h bewafuk log.....mujhe to pahut pasand aya supeeeeerrrbb bro.
My wife will be very impressed . That's it, I'm doing this one.
So after 4 years, have you done it?
ek dum heavy duty banaya hai
Awesome, I might do this with some small modifications...
The lenght is a bit much though imo, the rope will probably sag a lot...
One more pipe be fitted in centre
Yup idea is awesome it must be 3 instead of 2
كيف عمل سلم كهربائي
Bahot bahot accha banaya he...aap isko becho market ,me bhi aur online...sab jagha...bahot bikega....uncle me bhi lugi...bechoge tab batana zarur...supper...dupper
Also, use plastic caps on edges to avoid accidents.
Very nice idea. I am resident of Belgavi(karnatak).Will any one fix it in my house.?.
बहुत सही है। डोरी प्लास्टिक की है तो कट जाएगी और ढीली भी पड़ जाएगी कुछ दिनों बाद।
We can make this stands easily with old DTH tower stands then hole it & use it
😁😁😁😁😁 luv u bro thankye so much give me a idea 😂😂😂😂
Good job 👍👍 sir
I am moli Singh from Ludhiana India
Big fan 👌😎👌
I am inspired by your videos and make my own UA-cam channel
Anyway thanks for sharing video
Good. Close the end with plastic/rubber/metal endcap.
Probably better to let the rain just run through the tube when it is vertical so it doesn’t rust out. I have seen the ends of tubes rust out around the plastic end caps because water gets trapped between the steel and the plastic. The tube he used is thick wall it won’t rust out very quickly.
@@JWB671 i was also feeling like to use rubber caps for better finishing... but i get your point also so i am going to use removable caps for my diy 😀😀 thanks 🤭
Good job,,, 😇😇😇
... сделаю себе такую же приблуду под кухонным окном, молорик и удачи тебе во всём!!!
Чистые вещи будут об стену пачкаться
@@riffraff8619 ...установи подальше от стены,и будет всё ок!!!
Мне надо такую сделать, в балконе , только чу чуть по-другому
@@АрсланМагомедов-у2г лиана есть в продаже, крепится к потолку
Düşünce ve işcilik güzel,ama ölçü çok uzun olmuş.Tam ortaya bir tane daha demir aparat olması lazımdı,zira çamaşır asınca sarkmalar olacaktır.İyi günlerde kullanmanız dileğiyle :)
Damn you're really making it, from scratch. Thats really cool
Nice idea,,,👍👍👍👍👍👍👍👍👍👍👍
Good idea!
BTW, I think metal pipes need not be that thick if that is just for cloths :)
I think the gauge of pipe is ok. Because clothes have enough weight when they are wet
Very good idea 👍👍 👍👌
This is so useful yet so simple to build. Thanks for sharing with us
Perfetto 👍
Thanks!! I liked your video!! From Panama👍
from india.... 🙏
மிக அருமை நண்பா. 👌👌👌
Wonderful Awesome u are professional 👏👏👏
Nice vidio👍🏼👍🏼👍🏼
This dude is way better than bbkivines videos
Everybody support this guy
Thanks. Very best idea for making wall cloth hangings.
बहुत ही शानदार..👍👌
I like it. Very good working.
You should put a plastic piece at the ends to avoid water going inside when it rains .. to prevent corrosion of pipe.
Plastic dummy end cap
A good idea well done but the rope will possibly get cut , so we better do some safety for that like welding a round ring
Very very nice thanks
فكرة أكثر من رائعة شكرا
The edge of the falling metal tube needs some soft padding. It is at the corner of a turn and will hurt people. Also while people lift clothes to dry, it may hit them on the head. Good idea, but needs to be made safer.
Good
Rubber packings are easily available with hardware store which are used for table can be used
Alh homa barik Nice vedio
sir ji isme jo aapne Dori k Liya hole Kiya hai useese to plastic ki Dori cut jayegi to usme plastic ki bulet Lage deta
But Esme ek implement aur Chahiye jisse aur achha ho Sakta hai jisse secure ho jayega, but very good idea
Amazing idea, thanks sir i'm from Indonesian 🙏
🇮🇳
I would make the hole in the square pipe at fulcrum point as a slot. That way in raised position it can slide down a bit and prevent dropping down on its own. Consider it as a safety feature. All one would need to do is to raise the pipe may be half an inch and swing it down to usable aspect.
👌 அருமை
இது விலைக்கு கிடைக்குமா?
எங்கே வாங்களாம்?
எந்த ஊர்?
விபரம் சொல்லி இருக்களாம்
எல்லேருக்கும் பயன் உள்ள பொருள் அல்லவா
உங்கள் படைப்பு அருமை
Yes 2500 ....
9003214857
Awesome amazing 👍😃
Thanks for sharing that
maybe you can add a rope tension adjuster... awesome works
Good idea thanks 🙏 for videos uploading teams
Nyc idea !!
السلام عليكم
میں اسے خریدنا چاہتا ہوں۔۔۔کیسے ملے گا
Muy buena idea... Voy a aplicarlo aquí en mi casa.. Saludos desde Brasil
Amiga manejas muy bien el español.. felicidades.. saludos cordiales desde Chile
Great idea!! Very suitable for narrow balconies !!!
Use only when needed.
Merci pour le partage.
Thank you for sharing.
மிக மிக சிறந்த படைப்பு...
Please mention the measurements, of leangth and screw guages.
Awsome Yaar.....
Rather like that you can just make it longer by moving one side further away. Unlike commercial ones with a solid metal link between the arms
Is it possible to make with wood??
What an idea sir.gud idea
bravo. bravo. bravo! semplice e utilissimo salvaspazio. bel lavoro e grazzie del video!
Awesome idea. close the end with piece of sheet weld and grind properly
كم السعر ❤
Nice creations sir you get10 out of 10
Thank you brother...😃
😊
Would be great if he made that foldable arm rack with an extra arm 90 degrees. So when you don’t need that cloth drying rack you can push it up and bring up the other rack where it could be a rain or sun shade. Great job.
Very good idea
Sell this item on amazon
I want to buy
God bless you
Yogendra Mishra hahaha
An Indian's mind- amazing tools by simplest method.
Nifty idea well done
I m from Pakistan, thank you brother was just looking for it, thank u
I loved the wheel and pulley method (high ceiling)or( side wall) more than this.I know the pain and pleasure we get while doing it,becoz i too have done it.
I am going to make this for my home. It will be convenient for my wife and also for my children when they would fold up to play cricket in premises.
Stainless Steel string is also available encaseed rubber pipe is very strong and long lasting.
But this design good, must be very expensive for such job.
Shop address
Mashaallah bhai mast hai
Perfect like 111/0.
Ammohhh sooo suuuperb. ......engalukkum thayar panni anuppuma sis r bro. ....plz tk u soo much bro r sis 👌 👍 🙋
Где-то в помещении согласен а на улице стену протирать чистым бельём и можно сваркой большинство работы сделать, ведь приспасоба не нуждается в запчастях.
👍👍👍👏👏👏👏es lo q quiero hacer hace años!!!
Awesome idea looking for this
Avu Kya malse.... Very nice
Nice job
Wowwww super very use full this one amazing 👌👌👌👌
Why don't you market them? I am sure they would soon become popular
Great idea
Ek dam awesome
Very nice
Very nice
This looks really cool and simple, will do the same and save $200
Nice video but didn't see how u hold tool, i lean from that
Goodluck 😀 banget 🙏
Jordar
Good idea user, Kay jugad hai yaar, nice to see it
Parabéns, muito bom!! Vou fazer... Abraços.
Great idea it can hold even heavy things
😊👍👍👍👍
Excelente video gracias por compartir sus conocimientos 👌👍😎
*The problem is that wet clothes will rub against a concrete wall.*
Simple add some more distance
@@hamedmusun,
Clear,
but well if there is no wind
And if the breeze blows, the sheets will still slap on the concrete.
I do not argue for the lack of better
your idea is good.
Очень хорошая идея!!! Мне как раз своевременно, сварочного нет, а полки в гараже нужны!!!
Класс, но половину можно на сварку посадить.
Может он любит резьбу нарезать и у него дохрена винтов под шестигранник. :-)
@@Alexsoft76 , у меня тоже дохрена таких БОЛТОВ ( в магазине все есть), но есть рационал... Даже в наших, Российских условиях, дешевле купить сварочный, чем все садить на болты.... ;) Автор канала конечно молодец, столько хороших идей и решений,я просто предложил дешевле вариант.
Может у него тупо сваркафобия :-). Я тоже преподчитаю варить, если надо сделать надёжный и не раздельный узел. А раньше не было сварки, так тоже, сверлили, нарезали резьбу, садили на винты и болты.
Nice Aidia 👌👌👌
Excelente idea
सुंदर आहे 👍👍👍👌👌👌👌💖
How to purchase this product ?
Send me link
Zabardast
Hi
Excelente trabalho 👏👏👏👏👏👏👏👏