The tyre walls would be flexible causing movement in the aggregate mix whenever a vehicle goes over it causing wear, so doesn't sound like a great idea.
What type of behavior of concrete if rubber tyres are placed below the of concrete road pavement it can increase its vibration resisting properties..can it is possible or not I am student of civil engineering..so give information about that.
How about using Angle Grinder and grind this tires into small particles. Spray them on pavement adhesive that is painted on you driveway, rolling pressing them a little bit so they sink into the adhesive. Let them cured and hardened as shell.
My original thinking was to cutting the old tires into small 1cm cubes or chunks and then relatively, evenly springle them on top of a one inch thick newly poured cement concrete, tab the surface flat so that all chunks are half way sink onto the cement. After the cement dried, spray or paint pavement adhesive on it and wait for it to cure again.
Well ideally you don’t have to connect it together it’s better to have space between around 5 inch or more for flexibility but you could screw it together either way.
@@tinytick Why are you playing music with your voice? It adds NO benefit. It's incredibly disrespectful to play music while speaking to somebody. Background music has hit youtube like the Black Plague.
A void near the top sidewall. This technique is amazing. I did this 10 years ago to a half mile driveway on MUD. pure swamp. Still looks brand new today. Heavy loads and logging trucks never affected it.
Don’t know the exact number. concrete should last up to 100 years if it's properly cared for. Concrete projects that experience more wear-and-tear like sidewalks and driveways have an expected lifespan of about half that-50 years.
I am currently building my driveway this way, super cool!
I am using this method in my farm animal paddocks.
you might manage to reduce even more if you granulate the tire walls and add them to the mix
The tyre walls would be flexible causing movement in the aggregate mix whenever a vehicle goes over it causing wear, so doesn't sound like a great idea.
The idea is to have a wrap over sectional plates to hold the aggregate together
this is a brilliant idea if you are not to replace the concreted raod, but if repair must be done every 10 years what would happen with the tires?
Has anyone tryes this on a steep grade? Please let me know how steep of a grade it can be done on.
I was asking the same question
What type of behavior of concrete if rubber tyres are placed below the of concrete road pavement it can increase its vibration resisting properties..can it is possible or not I am student of civil engineering..so give information about that.
You're putting gravel in the tires so it doesn't impact the pavement.
Places all over that can use new road tech.
How about using Angle Grinder and grind this tires into small particles.
Spray them on pavement adhesive that is painted on you driveway, rolling pressing them a little bit so they sink into the adhesive. Let them cured and hardened as shell.
My original thinking was to cutting the old tires into small 1cm cubes or chunks and then relatively, evenly springle them on top of a one inch thick newly poured cement concrete, tab the surface flat so that all chunks are half way sink onto the cement. After the cement dried, spray or paint pavement adhesive on it and wait for it to cure again.
What is the tool you are using to connect the tires? I tried zip ties but it is way too slow. A pneumatic tool is required for any volume.
Well ideally you don’t have to connect it together it’s better to have space between around 5 inch or more for flexibility but you could screw it together either way.
Thats a compressed air nail or staples gun
@@tinytick Why are you playing music with your voice? It adds NO benefit. It's incredibly disrespectful to play music while speaking to somebody. Background music has hit youtube like the Black Plague.
Salah satu cara penggunaan tayar terbuang untuk manfaat semua...ada perubahan ataupun sama sahaja?..👍🎉🥳
Good road
hmmmm interestin like that idea recycclein them old tires ..clever .....does it work ??
Yes it does work.
@@tinytick Shoot I thought you were gonna say it doesn't work. I'm glad I hung in there!
2021😷todavía no hay zombis. ...
any cons to not cutting one side of the tire off?
I'm thinking pooling of water.
You think so
A void near the top sidewall. This technique is amazing. I did this 10 years ago to a half mile driveway on MUD. pure swamp. Still looks brand new today. Heavy loads and logging trucks never affected it.
@@dr.emmittbrowniii1711 can be used on steep terrain with a steeper slope?
Looks like they just buried tires under gravel.
What is the maximum Life time of mechanical concrete roads sir
Don’t know the exact number. concrete should last up to 100 years if it's properly cared for. Concrete projects that experience more wear-and-tear like sidewalks and driveways have an expected lifespan of about half that-50 years.
Who can't you make roads pure rubber
Ways to cut tire rubber out:
1. ua-cam.com/video/RLk8Je7ozMI/v-deo.html
2. ua-cam.com/video/RLk8Je7ozMI/v-deo.html or ua-cam.com/video/DnveV3JxDY8/v-deo.html
3. ua-cam.com/video/CObmocHiVeQ/v-deo.html for Harbor Freight oscillating tool
Elon Musk wants to use recycled tires on his Tesla cars.
Why, oh why, the horrible intrusive music? Dad we Americans talk you into it??
100000pp
stolen content. Thumbs down.
From where
@@fency117😂😂😂😂😂 украдено из своей головы😅, не забыли вам сказать😄 или подсказать🥲