Thank you! Yes I watched all your Moon videos! Seems like those Universal PCBs are somehow glitchy? I noticed it has weird ramp ups during spinning etc. Anyway its still a brilliant project you done here😊 I adore watching these videos :)
The bad thing: You can't see the programs on the PCB. You should hide the PCB behind special material and then you can write the programs on it. Or do you already know all programs? But it's so nice the door has a glass now. Where is the washing compartment now? 🤔
So, i building a real prototype of indesit logic with some improvements, and this video knocked into idea to make build-in converter for 4 control panels connected with single EVO-2 board which using one 8 KByte re-writable EEPROM base and controller(heart and head of mechanism) Inside i using same 5-pin connector between control panel and EVO-2 You also cant use base which doesn’t accord to the sum, inside controller(it won’t run, until you change the sum in controller manually) Modifications of existed data may lead difference of the sum as you can know. Control panel should show on the progress of programs, doesn’t matter which control panel, information will be the same. THAT ALL IN MINECRAFT
I remember my parents' Indesit WIE127 always spun at that higher idle speed during spin cycles, identical to the one at 1:15. Even with a new bottom PCB (the original one died at one point), it still spun at that speed.
This was made for the elderly little programs to choose the detergent drawer was built into the door that's why it wasn't transparent but it was bad detergent and softened ended up in the deal rather than on the clothes but fortunately the moon series didn't last long
Nicely done, I just stuck a universal PCB from Aliexpress on my Moon, It's still a moon!
Thank you!
Yes I watched all your Moon videos! Seems like those Universal PCBs are somehow glitchy? I noticed it has weird ramp ups during spinning etc. Anyway its still a brilliant project you done here😊 I adore watching these videos :)
@@bogdannb Great! I wonder does the moon control fit onto the MyTime PCB?
@@bogdannb whose machine is this
Brilliant! Cant wait to see a full cycle!
Brilliant work on indesign moon I wish look like at first and more options on it job well done
Awesome man ! I love these kind of projects 👍👍👍👌
Thank you🥰
Love your video awsome your very good at machines technology stuff Always looking forward to your next video keep it up
Yesssss, with the matching glass door it is perfect pls upload full wash videos asap!!
Thank you! I will!
Haha love it! I'd say put the original moon's motor back in as it would be more interesting to watch 🤣
Same
Oh it doesnt work right haha it makes weird movements
What a creative idea, WOW!!!
Thank you :)
This is amazing 😍
Thank youuu🥰
Nice to see a better PCB on the Indesit Moon! It could use another Indesit PCB or a Hotpoint PCB on other Indesit Moon washing machines
I like the replacement of the door
Perfect!
Tadaaaaaa!Wowww.you create a new model of indesit.....indesit moon time🤩🤩🤩😂😂😂😂😂
Great job 👍
Thank you🥰
love the new door
Thanks🥰
IT s look better than old Indesit!Good job!
Thank you!
Good work :)
Thank you🥰
Nice one w well done will be Interesting to watch lol
Thank you😊
Wow nice
Good job 👍
Thank youuu
I remember that you stress tested the Indesit MyTime washing machine 😀
Yesss. The only washer that deserved it as well as hoover🤣
Uh-huh
And one more thing to tell you...
Why do you hate Xiaomi phones if I like them?
Good Job :-)
Thank youuuu :)
And where now to pour the powder and conditioner?🤨
its in the door
I think the door seal might be rubbing against the machine. Also sounds like spider snapped. Oh well lol
Yes! Its seal ahaha. It got dropped during transport🤣
A front loading Washing machine without a window looks really odd to me
Can I do that?
Can you make video aging with this but washing
Yes :)
Yay
😍😍😍😍
Yes!
Why you changed also the pressure sensor?
I had to as MyTime uses sensor one. Moon mechanical one
GodDay b thought it was the same type, i didn't notice that😅😅
The bad thing: You can't see the programs on the PCB. You should hide the PCB behind special material and then you can write the programs on it. Or do you already know all programs?
But it's so nice the door has a glass now. Where is the washing compartment now? 🤔
On the drawer the programms are written.
I modified it. You will see on new video :)
3:12 - Synthetics 40/60, Mixed Fabrics 60, Dark Care 40, Time Express 40, Delicate 20, Duvet 40/60/90, Wollens 60: Final Spin 800rpm
Maybe if you get the piece of plastic showing programs temperatures ect you can try the moon challenge again :)
I did something else ;)
@@bogdannb ohh ok im ready for next video now :)
@@bogdannb random question, have you still got your old wmb
@@ryan_wmb Nope :( Its gone
@@bogdannb Thats sad, would you ever buy another wmb for memories? (they are one of my dream machines idk why lol)
My dad will like this 😂You should do some request . Even if I don't like it I want to see some cycles😉
I will :)
😄
@@C1200A Can't wait first 59' cycle but what your mum says about this washer?
@@Washing_fan mom doesn't like indesit 😂 when we were buying new machine i asked do u want indesit and my mom shouted NO don't buy indesit
@@C1200A My dad likes Indesit/Candy/Hoover which is weird ☺🙃
Surprised that worked! 😆
Also great video by the way! :)
Thank you🥰🤣
Your welcome :)
wouah 😍
🥰
Spinning sounds too poweful ✈️🤣
HAHA kaboooooom!
Eida s18.5 have a BIO program?
Yesss
@@bogdannb Eida e14.5 have a BIO program?
Why does the drum look like it already took a brick :P ?
Its Indesit haha
😍
So, i building a real prototype of indesit logic with some improvements, and this video knocked into idea to make build-in converter for 4 control panels connected with single EVO-2 board which using one 8 KByte re-writable EEPROM base and controller(heart and head of mechanism)
Inside i using same 5-pin connector between control panel and EVO-2
You also cant use base which doesn’t accord to the sum, inside controller(it won’t run, until you change the sum in controller manually)
Modifications of existed data may lead difference of the sum as you can know. Control panel should show on the progress of programs, doesn’t matter which control panel, information will be the same.
THAT ALL IN MINECRAFT
Why the drum is wobbly?
Drum hitting the seal due to some issue when it was transported I believe.
Its Indesit.. drums weak af..
MyMoon!
Nice Video!!!!! 🥳🥳🥳😊
Thank youuu🥰
@@bogdannb 😀🙂👍🏻👍🏻
MY Time it's back 😌😌😌🤩
Do you like your AEG?
Yes! :)
@@bogdannb 🤩🤩
odlično je to da radi hoces li probati pranje da opere ves
Naravno!
Next : Moon PCB with MyTime main control PCB 😆
bad noise creaking please fix this problem
Fixed it already. Its drum rubbing against door seal
Can you make it stress test machine
Not this
Put Beko WMB's boards in that indesit but it will fail so get 3.5kg beko and put its boards in
Its gone so i want to see 3.5kg Beko handle overloads
hi hows your day?
How to make a terrible washer decent lol
Its still terrible but bit less🤣
YAY! it's working :)
Time to replace door also?
:D
OH YOU ALREADY UT THE DOOR IN LET S GO :))
Could you please do a full cycle?
Hehehe I will record cycle!
@@bogdannb thanks so much
Zbog čega si promenio programator ?
Da li se njen original pokvario
Iz sprdnje🤣
1:05 what is this noise ?
bearings will be broken
Or spider too perhaps, sounds like the drum is rubbing the door seal
@@Motherboard686 Door seal make noise
creaking same as my indesit iwe 6125
It was dropped during transport so sometimes drum touches door seal :(
I'm suprised
In strange sound banging bearing motor attempt spin
Challenge: give hotpoint wmfug942 a bosch serie 4 pcb
There no sounds and it has weird gulp soind
Speed is way off 😂 so wash tumbles will be a proper speed for once
Hahahahaha yes🤣 I put myTime one too as it was cutting out sometimes during distributions etc. think it can be heard on video
Make wash with the new door
I will :)
Nice bulid 3:23 wow
This is indesit my moon or something like that
Yep
*drawer has left the chat*
This will overclock to higher speed than normal
I fitted MyTime motor too :) Its all fine
When garbage meets garbage🤯
🤣🤣🤣🤣
Volio bi kupit ovakvu da je malo mučim hehe ali nema ih u HR
Samo je za mucenje🥲
Indesit MoonTime
Alternative title: How to make an Indesit Moon washing machine 1000x better
No, but seriously tho, at least it has boilwash now🤣🤣🤣
Boilwash is max 70 on it🤣
@@bogdannb OH I FORGOR BOUT PROGRAMING💀💀💀💀🤣🤣🤣🤣
@@_funny_guy_official._ Gross as usual ahahaha
@@bogdannb yes of course, that's Indesit for ya ;)
Welp, still better than 40 at 60 😑
Did u make computer bourd
I remember my parents' Indesit WIE127 always spun at that higher idle speed during spin cycles, identical to the one at 1:15. Even with a new bottom PCB (the original one died at one point), it still spun at that speed.
I have idea to name it
Moontime
Now try put door from MyTime in it
I did! Watch whole video :)
He put a WI* series door
Indesit moon.
NOOOOO
Indesit normal washer HAHAHHAHA.
Why door isn't transparent and where is dispenser for detergent?
This was made for the elderly little programs to choose the detergent drawer was built into the door that's why it wasn't transparent but it was bad detergent and softened ended up in the deal rather than on the clothes but fortunately the moon series didn't last long
It’s totally Indesit MyTime
😃
Indesit moontimw😅
Control board it looks ugly without cover
I noooooo😢
Polska
mega JANK
You mean junk? I agree🤣
Kkk
destroy it please
T