Hi, just a question about how to calculate the S/N ratio based on Taguchi Nominal is the Best Type using Minitab. My result indicates some data are missing so that the S/N ratio graph cannot be plotted.
Hello sir, thank you for this tutorial. Can you please explain that what is the logic or mechanism behind the L9? How the combinations of parameter values will be done by Minitab software? What is the significance of L9 Taguchi method over FFD, BBD and CCD method?
Hi. Simply, you are asking me to initially teach full and fractional factorial design. TAGUCHI design is for finding main effects, while CCD and BBD FOR interaction effects
@@EngineeringandInfo Thanks for your fast reply. The optimization method that used in your article entitled: "An Integrated Approach of GRA Coupled with Principal Component Analysis for Multi-Optimization of Shielded Metal Arc Welding (SMAW) Process"
Hello thank you for this tutorial. can you also explain how to use nominal is best option in Minitab. Because I only have a specific range of value to obtain on my response. thnk you
Hi sir can you please guide. I have 3 response variables at 2 levels , so I followed the L4 orthogonal array three times (L4x3=12 exp) for three different methods for comparitive study. How to optimized the input variables for all three response variables?
Hi. With due respect, it seems that you are quite new to optimization. There can't be any levels of response variables while you mentioned 2. I request you to please contact me on miq0054@gmail.com or +923325056162 for better consultation
Sir I am doing taguchi gra analysis for FSP optimization and in Anova I’m getting p value greate than 0.05 for all parameters how should I interpret that or how I could solve this problem
Dear SIr, for my project , I was stuck with an optimization problem, which is needed for continuing my experiment. There are two factors , one having 5 levels and other having 3 levels. Also there are 2 responses, out of it one has to be minimized other has to be maximized. Can you give me a quick guidance to understand which is the optimed factor values? I
Can we perform workplace parameter optimization to determine which factor influences a worker in his productivity For example, the workplace parameters that influences a office worker is the type of chair,table,etc. Can we perform taguchi analysis on this topic If yes, please explain how to collect data This is for my mtech mini project
@@EngineeringandInfo for example if we are considering an office workspace we can note the time taken (in seconds) by an employee to type a paragraph Then we can use the smaller the better method to minimize the time
Interesting and thank You for this lecture
Very informative video. Thanks
Very nice, it's amazing, teacher, thank you.
Thanks
Hi, just a question about how to calculate the S/N ratio based on Taguchi Nominal is the Best Type using Minitab. My result indicates some data are missing so that the S/N ratio graph cannot be plotted.
@@kegong1270 hi.
Please contact me on WhatsApp.
I will guide you via voice messages or call
Thanks a million for the presentation. Please can you help with the details of the journal articles so i can read through??
Please text me on WhatsApp or email me.
I will share my articles
Thank you sir very useful
Welcome
Can we use the ANOVA analysis for this experiment (Taguchi L9) ?
Yes. You can apply
Hello sir, thank you for this tutorial. Can you please explain that what is the logic or mechanism behind the L9? How the combinations of parameter values will be done by Minitab software? What is the significance of L9 Taguchi method over FFD, BBD and CCD method?
Hi. Simply, you are asking me to initially teach full and fractional factorial design. TAGUCHI design is for finding main effects, while CCD and BBD FOR interaction effects
Thank you so much
Welcome
Very well explained
Thanks
Hello, thanks for your tutorial. I couldn't find the single and multiple optimization tutorial in your playlist. Can you please add them?
Taguchi is single optimization.....which multiple optimization technique you require
@@EngineeringandInfo Thanks for your fast reply.
The optimization method that used in your article entitled:
"An Integrated Approach of GRA Coupled with Principal Component Analysis for Multi-Optimization of Shielded Metal Arc Welding (SMAW) Process"
@@alinaderi333 okay. I will upload ASAP
Thank you so much. it's really helpful. can you explain how did you do the ANOVA (table 5)?
Send me your data, or contact me on WhatsApp.... I will teach you in performing as well in interpretation
@@EngineeringandInfo hi Dr i need ANOVA table for L9 four fctor 3 level please help me
@@tajudinayub7684 I did via WhatsApp call
nice video sir, can you explain how to decide which orthogonal array we have to select L9 or L16 or L27.
thank you sir
Depends upon factors and levels
Sir please tell what is meaning of factor and level
thank you for your video lecture, how can I conduct to get the response values by experiment please
What is meant by response level
Hi sir have a doubt in ANOVA how can I contact you?
00923325056162
This is my WhatsApp
Sir i have to make data on tensile and hardness of aluminum samples for my mtech thesis. Cam help me plz so my work be done i stipulated time
Please ask your queries
What ate your queries
Plz keep in comment box yur contact so. I call
Hello thank you for this tutorial. can you also explain how to use nominal is best option in Minitab. Because I only have a specific range of value to obtain on my response. thnk you
Yes. Please contact me on WhatsApp for further details
Hi sir can you please guide. I have 3 response variables at 2 levels , so I followed the L4 orthogonal array three times (L4x3=12 exp) for three different methods for comparitive study. How to optimized the input variables for all three response variables?
Hi.
With due respect, it seems that you are quite new to optimization. There can't be any levels of response variables while you mentioned 2. I request you to please contact me on miq0054@gmail.com or +923325056162 for better consultation
Where can i get your article based on this video?
Google scholar or email me or WhatsApp 00923325056162
great
thank you
Thanks
Sir, kindly share the video explaing how to plot the Main effects plot for SN ratios for research papers
I will share it by tonight
Video recorded.
It will be uploaded after 30 minutes
ua-cam.com/video/I7n6j021eDA/v-deo.html
Thank you very much for your timely response with video sir
Sir, is it possible to keep some objectives as smaller is better and some as larger is better and perform one single optimization?
Yes
Sir for l9 should we have to do 27 experiment or 9 experiments in practical
9
Helo sir, very useful video.thanq so much. How to draw minitab graphs more attractive for paper publications.
Need editing
Sir
I am doing taguchi gra analysis for FSP optimization and in Anova I’m getting p value greate than 0.05 for all parameters how should I interpret that or how I could solve this problem
All parameters are insignificant
@@EngineeringandInfo But in the literature we have one of the parameter have a significant role in influencing the output response
@@EngineeringandInfo Can you help me with the analysis ?
@@yugeshraajha8792 what help reuired. you can contact me on whatsapp
@@yugeshraajha8792 u r right. may be u choosed insignificant one
Hi sir. Could you explain how to design l27 please?
Yes. Please replicate L9 thrice
Thank you for attention sir. Is L27 design for 3x4 array true if I don't select interaction selection .
But the design is different when using interaction. It is possible design without interaction for L27?
@@falihadrag1951 you will use full factorial for interactions
Dear SIr, for my project , I was stuck with an optimization problem, which is needed for continuing my experiment. There are two factors , one having 5 levels and other having 3 levels. Also there are 2 responses, out of it one has to be minimized other has to be maximized. Can you give me a quick guidance to understand which is the optimed factor values? I
apply multi-objective optimization... Grey relational analysis.... Composite desirability method...
@@EngineeringandInfo which software..and can you suggest any video that you have published
@@mechzion01 excel... no, I haven't made any video so far
@@EngineeringandInfo please provide your contact number
Can we perform workplace parameter optimization to determine which factor influences a worker in his productivity
For example, the workplace parameters that influences a office worker is the type of chair,table,etc.
Can we perform taguchi analysis on this topic
If yes, please explain how to collect data
This is for my mtech mini project
How will you calculate response
@@EngineeringandInfo for example if we are considering an office workspace we can note the time taken (in seconds) by an employee to type a paragraph
Then we can use the smaller the better method to minimize the time
@@jyothisprakashk9609 interesting.... yes. .. I can help u... +92 332 5056162
My WhatsApp
Can anyone tell what is the meaning of factor and level??
Factor is the variable of interest. Alternative name is parameter. Whose appropriate setting is of interest to minimise or maximise response (output).
Thank you sir
May I get link for your research paper
Yes. Search MOHSIN IQBAL QAZI in Google scholar.you will get my papers
@@EngineeringandInfo Thanks
hello Sir, could you please make an explanation video about pooled ANOVA? I am struggling over that stuff in my thesis. thanks
Heard first time...
Any reference research paper ... do you have
Software name and software link please
I have to work on it in my thesis
Minitab
please provide phone
00923325056162