Turn Signal Coding Mercedes using Vediamo

Tactrix Openport 2,0
www.aliexpress...
Xentry OpenShell Pass Thru 2016 Installation
• Xentry OpenShell Pass ...
Vediamo Installation for Openport2 + Full CBF Database
• Vediamo Installation f...
#vediamo #openport #mercedes #xentry
Music
bensound.com

[@moldovanandrei7008]

This guide for W204, W212 facelift! Prefacelift do not work!

[@raspia2]

Hello from Spain... First of all, thanks for your job. When yo go to "download folder" after coding and before hard reset, does it mean you must have internet connection? I´m using chinese Openport, so I can´t have Internet. Thanks in advance.

[@스치면버디-f6i]

w222 It's 2016. Please tell me the traffic sign code

[@taher1973]

Great Video pace. Easy to follow

[@MB212]

Going to try this 👌 You should do short video showing the function on the car also if you like that think many here would see it 🙏

[@MercGARAGE]

Will try to do from the next video :).

[@MB212]

Go for it 🤘

[@omidbayat-e9c]

❤❤❤❤🎉🎉🎉

[@kabomhmad]

My friend, please make a video explaining how the night vision software works, either offline or online, if you please

[@truckzone9821]

Hello could you help me please i need to add arabic language to insturment for mb truck Mercedes mp4 they told me it is possible via vediamo so could you help me please

[@MercGARAGE]

wa.me/message/QVO6IPAYMCV3M1

[@hamradiostation_M0UGE]

Does anybody know how to code out EML after decat exhaust is installed on 2014 a45 AMG W176 ?

[@mikimiki195]

In my 2015 MB GL550 ambient lights are not bright enough I even have them turned up to level 5
Is there way to make them brighter by coding

[@Dante-mb8dv]

Grazie 1000. Bel video interessantissimo. Per caso sai come entrare su ECU della W246 del 2016 per abilitare ribaltamento specchi e luci soffuse?

[@MrBenzakaBenz]

Hi
I can't activate in my wagon w211 2003 !
if you can help me
thanks

[@zattut]

Wonder if this software would work to activate the dashcam on Mercedes! Are you 🇩🇿 by any chance?

[@LaEconomiaNoEsUnChiste]

In S W222, the ECU is BC_F222. The code is VCD_OLC_BLINKER_MODEL and the parameter, Pbmm_anz_tb. Originally it put "3", and you can choose, for example, "5"; it's best because you have more time.

[@nsarov]

Do you know how to code the tail lights of W222 from US to EU with vediamo ? Is it SAMR_321.CBF that I have to use or BC_R222.CBF or any other? Any help is welcome ! Thanks a lot in front !

[@LaEconomiaNoEsUnChiste]

@@nsarov The reply is above "in S W222, the ECU is BC_F222. The code is VCD_OLC_BLINKER_MODEL and the parameter, Pbmm_anz_tb. Originally it put "3", and you can choose, for example, "5"; it's best because you have more time." So use BC_F222. So simple at least in my car.

[@nsarov]

😃😃😃😃😃Thanks for the quick answer mate! Very helpful. Sorry for not paying atention in details ! 😃😃😃😃😃@@LaEconomiaNoEsUnChiste

[@theonlyDerp]

Is the same true for the w203 c class?

[@MercGARAGE]

Procedure should be same, you can check it.

[@kabomhmad]

Hi

[@Lord-Of-The-Turbo]

Hello, I have a W204 automatic transmission vehicle. There was a problem installing the program on this vehicle and my car does not start. I also have the MB C6 original diagnostic device, but I do not know how to use this device. Can you help me with scn or coding? I don't know how to use via vendiamo, please support me via remote connection by setting an appointment, thank you very much.

[@MercGARAGE]

Please contact via whatsapp

[@leonardodiazcoronado9593]

Se puede realizar en un mercedes w164?? Saludos.

[@ukaszjurys2475]

Simple as that.Very good video.We wait for more.I was afraid of Monaco and Vediamo as not many videos on YT show how-to. Thanks. PS.Any videos for 722.9 and ECU flash etc... pls :) Simples

[@Schneebrunzer1983]

Hi, Do you know what cbf file is it for the w205?

[@gladiator-sn2yx]

hi can you do the same for w211 2009? what cbf file is needed for this?

[@SprinterCity-l4d]

Привет! Как с тобой можно связаться у меня к тебе есть пару вопросов?

[@rukako]

thanks

[@mercedesslkr170cheapremote2]

This work on w209/2003 ?

[@davidsuh9792]

한국분이세요?

[@Juztic]

When i follow you by step it work but when i restart engine it back to bink 3 times again.

[@Juztic]

I have done that Thank you.

[@0456giliolm]

What physical connection are you using to connect to the OBD2 port? Laptop, C4/C5 or other? I cannot get to connect with ethernet cable where you are at about 1:45

[@moldovanandrei7008]

In Vediamo ist clearly to see that autor use Open port!

[@jaimemelara3104]

Bro, will this work for my GLK350 - US version? Also, do you have a video (or can you make one) on how to program it to enable the amber turn signal for 2nd generation GLK's. Currently, we only have red brake/turn signals. Amber turn signal is disabled. The pin is there, just disabled.

[@MercGARAGE]

Have to check. wa.me/[phone]

[@pakautomotivetp411]

Great

[@Schneebrunzer1983]

Hey, i cant open the Vediamodata folder becouse more than 500 ECU's....... Can i use a specific folder??

[@MercGARAGE]

The error says why you cant open. So split the cbf into two or more folders

[@Schneebrunzer1983]

@@MercGARAGE 😍 thx, Best Regards from Vienna 👍👍

[@automotive7136]

If I need training??

[@ManixMAR]

Merci encore une fois 😍

[@cleprogrammeetdiagnostic51]

Do you have skype

[@MercGARAGE]

wa.me/[phone]

[@hassanabd679]

How if ican canceld preeseef?? 212

[@MercGARAGE]

Sorry i didn't get you.

[@hassanabd679]

@@MercGARAGE ok thank you

[@hassanabd679]

I have a message on the tableau watches PRESAV

[@MercGARAGE]

@@hassanabd679 😳 you have a message... i didnt get the rest.

[@hocinechentouf8231]

Please need help with openport : unable to communicate with ecu.
Thanks

[@MercGARAGE]

Please contact via WhatsApp or Email

[@hocinechentouf8231]

What is you WhatsApp number?

[@MercGARAGE]

@@hocinechentouf8231 Please check the channel all contact details are there.