Це відео не доступне.
Перепрошуємо.
Benelli M4 Modifications Tutorial | 922(r) FFT Trigger Group (Hammer/Trigger/Disconnector) | Part 3
Вставка
- Опубліковано 12 сер 2024
- BENELLI M4 FULL TUTORIAL ON UPGRADES - PART 3
~922(r) compliance: replacing the hammer, trigger, and disconnector with FFT US-made parts. Same procedure for Benelli M1/M2/M3/M4, Super Black Eagle I/II/III, Stoeger 2000/3000/3500/P350, Franchi Intensity/Affinity
~This is my complete tutorial on how to upgrade the Benelli m4. I made this tutorial because I wanted a Benelli owner to be able to watch this video and be able to upgrade many things without watching many videos that take too long to explain everything. Also, I try to explain and go into as much detail as I could.
*****************
~For the record, in part 3, which is this, I'll be replacing the hammer, trigger, and disconnector with USA made parts so I am 922(r) compliant as of the end of this video.
~I'll be using the Freedom Fighter Tactical (FFT) TRIGGER PACK UPGRADE including the relevant springs
*****************
~I separated the video into separate parts just in case you want to skip around. Here is the breakdown:
Intro/922(r) - 00:00:00
Disassembly - 00:02:15
Assembly - 00:11:57
~Trigger
~Hammer
~Disconnector
~Hammer Spring
~Carrier Spring
~Trigger Spring
~Disconnector Spring
*You will need RING PLIERS for the Benelli M4; if you're replacing the magazine tube, you will definitely need this tool (they vary in cost, but I got a more expensive one because there are more things you can do with this specific one): www.amazon.com/gp/product/B00...
~Link to trigger pack upgrade (~$270): freedomfightertactical.com/co...
~Link to a more detailed explanation of 922(r): freedomfightertactical.com/pa...
~Link to Part 1 (Benelli M4 Modifications Tutorial | Bolt Release, Magazine Tube, Safety, Bolt): • Benelli M4 Modificatio...
~Link to Part 2 (Benelli M4 Modifications Tutorial | Bolt Release, Magazine Tube, Safety, Bolt): • Benelli M4 Modificatio...
~This is not a review of the firearm. If you want to see my thorough review of it, click: • Benelli M4 Tactical | ...
~A major question people have regarding this gun is: is it worth the $2000 price tag? ABSOLUTELY YES. Don't buy a Mossberg 930 or Benelli M2 or something similar if you don't have enough money. Will you be satisfied with one of those other guns? Yes, but only satisfied. Save your money until you can buy the M4. The Benelli M4 is a top-notch shotgun designed to fire anytime, anywhere, with any ammo, in any condition.
~Unfortunately, due to UA-cam's new, albeit biased, policies on what can and cannot be featured on their site with respect to firearms and ammunition, I have to revise my descriptions. So, I will be unable to put links in the description or video that lead to firearms, accessories, or ammunition. Of course, you can simply Google the name of the entity in which you are looking for. But, if truly can't find something by Googling it, just let me know in the comment section and I will do my best to get back to you.
~Thanks for watching and don't forget to LIKE and COMMENT on this video...especially if you've enjoyed it
~SUBSCRIBE if you want to stay updated on each new video of mine, or you just like what you see on my channel: / elitekickboxer
~You should definitely check out my other videos - which include ELECTRONIC MUSIC MIXES, AIRSOFT REVIEWS/WARS, FIREARMS, and many other INTERESTING MISCELLANEOUS things: / elitekickboxer
Just used this video to install my 922r trigger parts from FFT. Thank you so much for posting! Huge help!
As ive just gotten around to purchasing one of these shotguns, I found this to be very informative so as to save money on paying a gunsmith to do it.
The package with my full size barrel and other 922r components hasn't arrived yet, but - in spite of needing to go to the store and pick up a tool I haven't previously needed - with the help of this video I was able to easily tear down and rebuild the trigger group after never having done anything like this before.
Your pacing is excellent, the long-form presentation is incredibly useful, and I am no longer intimidated by the prospect of performing in-depth maintenance of my own guns.
Thank you.
You are an angel. I thought I cleared spring tension and did not and my parts went flying everywhere but got it back together thanks to you.
I'm happy to hear you were able to fix everything!
Very very helpful. Great pace and good instruction. Thank you!
Awesome video! Perfect length!
Best Video hands down! Made it super easy! Thank you very much!
Thanks for this video. Just did the upgrade on mine. The video was well paced and you made it very easy to follow, almost in realtime as I was doing it.
Thank you for the feedback. Glad to hear it went well.
Did you have the same problem where the hammer would not release and had to shave part of the disconnector off?
@@detectivewhiskers6771 That exact thing did happen to me, sadly.
I must have got lucky. I didn’t have to do any modifications.
Excellent video. Longer videos are great when they are informative and thorough.
Thank you for the kind words.
Please upload more bro i love you im your biggest fan i started watching you yesterday and i cant stop watching
I used your guid to install my black fft trigger, disconnector and hammer to make it 922r amd your guid was pretty good thanks again
Glad to hear it worked out...and that this tutorial helped!
Awesome video. I wish I would have done a video when I converted mine for 922r. 👍👍👍👍
Very helpful thanks!
Excellent video very comprehensive!!!!! Great work!!!!
Thank you very much!
I just did all three pieces of my trigger kit today and like Todd (off FFT) I don't recommend taking everything apart as you have done.
It is much easier to do the hammer separately from the hammer and disconnector.
Although this is a helpful video.
very Porfessional! Thank You
Great video Thank you!
Great video now i know that i can do this myself patients is the key
Very Professional! Thank You
Thank you for the feedback
Great tutorial, Thanks!!!!
Thank you for the feedback.
Awesome video thanks man
Thank you!
Really great thank you.
Glad I could help!
Good video, only recommended change was to lead with the fact the trigger needs to be ground down
Great tutorial. I replaced my 922(r) trigger parts but ran into an issue with the shell release not working right occasionally where I can't load any shells because it gets stuck. Any adjustments to try?
Thank you for making this video.
You're welcome!
@@ELITEkickBOXER I think your trigger is NP3 coated. Does it feel smoother?
@@elonmusk8667 I'll be honest, I haven't used the gun enough to really notice a difference.
@@ELITEkickBOXER Thank you
I don’t even think you’ll remember me but I was Wonderbread1423 always played with you on ps3 also helped build the castle lol
The name definitely sounds familiar lol. It's been a long time for sure. Those were definitely good times
Good video. Quick question, where did you get the mat you're working on?
Amazon: www.amazon.com/gp/aw/d/B07F7FGVJH?psc=1&ref=ppx_pop_mob_b_asin_title
Totally great video. Thank God you focused when you did. For a bit there I thought the most important parts were going to be blurry. That was a very informative video. I am about to embark on the same adventure. FFT recommends doing either the hammer, or the trigger, disconnecter first. You did all of it at the same time. I like your way, any problems with that? Also, you said you had to shave down the disconnecter? What did you use to shave it, Dremel, file? And how much...ish? Thanks and keep up the great stuff.
Thank you for the comment. I'm glad it was helpful. I just never really found a video that shows everything super clearly, so I wanted to put this out there for anyone in a similar position that I was in.
It honestly wasn't that bad. The problem is doing it right and knowing what you're doing. You may have to pause and unpause and rewind often, but that's okay. It takes a while (or can take a while at first) if it's the first time. But after doing it multiple times of troubleshooting with the shaving the disconnector, i was able to do basically the entire video in 1-3 minutes because I knew EXACTLY what to do. But again, don't worry about that. It's really not difficult. Just make sure you don't lose pieces. That can be very bad.
Oh so I used this "electric knife and tool sharpener" only because i had it. It just has an abrasive belt that goes around in a circle. I mean i feel like you could just use a hand file. I wouldn't use anything that you can't control how much comes off. I don't even know if this problem would happen to you. It may. It may not. But let me just say i only removed a HAIR worth of material. Except for the fact that it looks a bit rounded, you wouldn't know i sanded it down. So again, very very very very little needs to come off. Like a 1/10 of a mm if anything. Then you just do trial and error with the trigger. This is when you'll become a natural taking it apart and putting it back together IF you even have this problem.
@@ELITEkickBOXER Thanks again for all the useful info. I am going to make sure I have everything ready to go and the time to get it done without interruptions. It is crazy we even have to do this. Common sense gun laws! Right...I would like to ask if you have noticed any improvements in the trigger pull or if it is basically the same. FFT says about 2lbs difference I think. I am going to watch your video another 3 or 4 times before I even attempt, but it doesn't look difficult, just precise. thanks
@@tommorrison8424 Anytime. I'm glad I can help. Yes definitely watch it a few times until you believe you know what you're doing. Even then i probably would be just pausing and playing constantly when i actually do it.
I haven't fired the firearm in a long time unfortunately. So i really have no idea if it reduced the pull by that amount or it feels the same. Sorry about that.
However, it you are able to answer that question, please let me know so others and I can know the answer to that too if you don't mind.
I used a Drexel and just took the edge off
You said at the end that you replaced 3 parts & need to do one more to be 922(r) compliant. Everyone I have talked to or heard from says you need to change a total of 3 parts only need 4 if you are changing a field stock to the Benelli Collapsable stock. Can you please clarify?
Yes, I see what you mean. The 922(r) compliance has to deal with a firearm having 10 or fewer foreign parts for it to be considered legal and meet the criteria for this law. Note that only particular parts will contribute to this limit, while other parts do not matter (according to the law) if they are foreign or not. The parts that count toward the 10 and that if foreign can be replaced with USA made parts include the Receiver, Barrel, Bolt, Bolt carrier, Gas piston, Trigger housing, Trigger, Hammer, Disconnector, Buttstock (with integral pistol grip), Forearm/handguard (forend), Magazine body, and Follower.
As of the end of this video, after going back to rewatch it, my particular firearm is legally compliant with 922(r) due to the modifications I made. However, if for instance, you replace the magazine tube with the full capacity 7 round tube (not just a +2 extension, as I have the full length 7 round tube) or replace the stock with a non-USA made stock, you will need to change a fourth item to make it compliant. In the other videos (parts 1 & 2) I did change some other things to USA made parts, so again it is finally compliant as of the end of this video.
I understand this may not make the most sense. I would HIGHLY recommend you click this link as the website has an extremely detailed description of this 922(r) compliance that I would think will basically guarantee to answer any of your questions: freedomfightertactical.com/pages/922r-faq
If I buy a non pistol grip M4 do I still need to worry about 922R?
922R only comes into play if you modify the firearm after you take possession of it, to the best of my non-legal advice. If you don't change anything on it after you get it, it should be compliant to start with. Once you go changing things (remember only certain things count toward 922R--amd check the description for details), then it may play a part if you decide to swap one thing out for another
I’m having the same problem with the disconnector, what did you use to make the adjustment?
I used a tool that had a rotating sanding belt on it to trim off a hair. But i would think a metal file and patience could do it too.
@@ELITEkickBOXER I'm having the same problem. I'm probably going to try a hand file on the disconnector but I'm just curious, do you think I could get away with filing the part of the hammer where it makes contact instead of the disconnector? Or would filing the disconnector be the safer bet?
@@jkees6751 As much as I'd love to answer your question, I'm not a professional and really can't give you a good answer. I just filed the disconnector because it was easiest for me and could always replace it (although costly) if need be. I'm sure you COULD file the hammer down, I just can't say how easy it would be and/or how effective it might be. It could be better or equivalent to filing down the disconnector itself, I apologize I truly don't know.
What size is your channel lock blue pliers from? 6, 8 or 10? Wouldn’t a regular needle nose work also ?
amzn.to/46uVnEy
8 inch
Could they? Perhaps. However, the tips of these pliers are quite thin (compared to average needle nose pliers and the pins are close to the pivot point allowing greater force without snapping)
@@ELITEkickBOXER thank you and will follow your advise. Curious, did you ran into a problem or require additional filing on the trigger assembly as some people seem to have to , reporting misfire issue ?
@@TheDwchan In hindsight, considering the price of the kit and the fact it's made custom for this particular firearm is both disappointing and aggravating that it needs to be filed down at all. Other than the filing I did/mentioned in the video, I have not had a problem since. Definitely dry fire it a little before you put your tools away (in my opinion).
@@ELITEkickBOXER ;(. In short , if I understand you correctly, expect to do some manual adjustment? If so, which filer did you use? Given I do not want to overdo it. Also, what if I only use 2 of the three parts from FFT ? As I recall, it was the smaller piece (the disconnector sears - smallest pieces) that needed the adjustment? Have to go back and watch the video again
@@TheDwchan Specifically, I used this: amzn.to/3D5GBGQ
However, I had that on hand already. Something with a belt sanding ability to easily control how much material is what I used, but I don't see why an average file can't do it.
Unfortunately, yes. Expect there to be a possibility of some manual adjustment.
Well it depends on the number of parts you have already replaced. I would read this and see how it applies to you: freedomfightertactical.com/pages/922r-faq
However, and don't quote me on this, if you want to increase your magazine capacity or do something where you're changing out factory parts, you legally cannot exceed a certain amount of foreign parts (not any part in random, they are limited to certain parts -- again read the link) in the firearm. So depending on the number of foreign parts (according to a specific list), you have, you may or may not need to install all three pieces.
lots of issues with the FFT triggers i have read on forums. Very pricey for 3 pieces of metal. They should not have the hammer sticking like that for that price. obviously taking advantage of people for the 922(r)
Couldn't agree more!
@@ELITEkickBOXER what did you file down on? The disconnector?
@@robbieknight4508 That is correct.
Price is now up to $365 for the kit. For that price, you should not have to file/grind/sand ANY parts for fitment. Totally agree….they’re definitely taking advantage of the 922r issue. Am looking at Briley Manufacturing for another option. Only drawback is that you have to send the trigger group in for them to do the work. But at least you don’t have to worry about something not working.
when you will be back🙁😟🥺😭
What do you mean?
u didint do a new vid
i watch every vid you upload
@@SCP-zz8gd wow that's awesome! Thank you so much.
Honestly, i just don't have anything to upload at the moment. Unfortunately other academic things are also taking precedence over youtube at the moment which doesn't help in uploading more stuff. Maybe closer to summer I'll have something else, but Honestly I'm not sure
My snap ring is pissing me off. First its a pain in the ass to remove. Feels like your going to break your pliers. Then whem i go to put it on, it doesnt fit in the slots on the pin. Its too thick!! 😡😡
Sorry for the delay. What brand are you using? Trust me when I say I know that feeling though.
Pov camera shots at times was terrible
Yeah sorry about that. Sometimes I don't realize that till after the recording.