How to Install a CJ-7 Jeep Door & Window ::: 1984 CJ-7 Jeep Restoration Florida @ Palm Beach Customs
Вставка
- Опубліковано 16 жов 2024
- Check out the finished Sunshine Yellow 1984 CJ-7
• Sunshine Yellow CJ-7 J...
Complete Jeep CJ-7 BUILDS ON OUR WEBSITE
palmbeachcusto...
CJ-7 Jeep door and window assembly are no easy feat - even for the experienced Jeeper. We put this quick how-to video together for our viewers.
REMEMBER! Make sure that you have the door handle installed first so that you can sneak the wedges that hold it there in place. You cannot do it after the window glass is put in.
If you found this helpful, give the video a like and subscribe to our page to stay up to date on the latest and greatest.
Thank you for this video, really help with knowing how to remove glass will view again when ready for replacement
Roger That !!
Great video!!
Thank You so much I couldn’t figure it out!
Sweet Greg
Great video!! Saved me a bunch of time replacing my CJ7 doors.
Glad to hear that Rodger ..cheers
I just did the doors on my 81. They are the old style with fixed vent windows. Your video was very helpful, but the old doors have much less room to get the vent window track in. I had to remove the window stop in the bottom of the door to allow the window to drop all the way to get enough clearance. Thanks for your video - without it I might never have have been able to get the job done.
Very Good /yes window stop removed is Key
BOY I NEEDED THIS INFO... WELL DONE...
Glad It helped!
Ron Nelson welcome Ron Good luck!
oh my gosh! THANK YOU
John Sirmon cheers John ✌️here is a link to a bunch more Jeep info palmbeachcustoms.com/cj-7-jeep-builds-restoration-with-200-hours/
Great advice. Do you fill like tackling a couple more Jeep door resto's?
Chris Sure let me know here is my contact
palmbeachcustoms.com/contact-us/
Hi just was wondering my yj has to holes in the bottom of the glass and two plastic clip go in the glass is there a tool to push them in I feel if I push any hard glass will break
I just saw this question there really isn't a tool that I know of, a little white grease might help you can also cut a small piece of plastic PVC maybe 1/2 inch and use it on the opposite side as someone holds the glass on a table with a blanket to give you support on the back side
I used to work installing auto glass. Tempered safety glass is a lot tougher than most think. I use a plastic faced hammer, with the window on a cardboard box to absorb the shock. One sharp tap usually does the trick.
Did you do a video of the complete restoration ???
MrSlickmonster6973 Here is a walk around video cheers ua-cam.com/video/d4BinuxeZ0E/v-deo.html Also here is a page with full descriptions and more videos
palmbeachcustoms.com/truck-restoration-services-cj-7-restoration/
Do you have a video on how to get regulator out without breaking something
Gus, regulator comes out last, remove upper belt moldings also
What brand weather stripping do you prefer?
Lynn Steel Rubber, makes most of the weatherstripping in the USA for the classic and muscle cars, try them first some of the jeep doors outer door to body gaskets don't fit to nice so its hit or miss unfortunately