eBay Twin I-Beam Pre-Runner Build | Part 4
Вставка
- Опубліковано 11 лют 2025
- In this video I assemble and install some LX Shock 90mm shocks and bypass. Had to make some slight changes to make then fit how I want. Overall happy with how it turned out!
Link to the website for this suspension and more: lxshocks.com/c...
This truck is awesome. Nice work
Your gunna clean up the spare tire cage cuts right..
Your a talented builder..
To cut parts like whete the spare fits I use a cheap speed controlled mini dremel off Ali Express.
Its tiny but you can use all the disc bits you want.. super handy for clean cuts in plastic.
Another good one is a Jewelers saw. Remove blade, insert in drilled hole, attach to saw. Super clean lines
Thanks, I busted out the dremmel for this reason! Definitely got messy real fast 🤣
I now know what my winter build is going to be
Looking good brother. On my beam setup the sprung front shocks will work better mounted to the beam rather than the radius arm. I think the front right shock is mounted behind the beam while the front left is mounted in front of the beam, reference the proline instructions, so they get full bump and are more inline. Notice the angle of the front right bypass, I believe its designed to be mounted behind the beam like full size beam trucks. Sick ass build man, coming slong nicely. Might be worth looking at the rc4wd extended ball ends and see if they fit the lx shafts for better clearance.
Love this rig!
Swap out one of the springs out on the 90mm shocks.
Or both..
Beautiful
Hope it drives as good as it looks.
What steering servo mount do you use? Does it come with the kit?
It comes with a front servo mount!
woot woo! - do they leak thou🤔 curious, they look v nice!
could have my arm twisted🤪
I've had some that do, and some that don't, so far these aren't leaking!
I bought one of the early sets they made for my UDR and they were the absolute worst shocks I've ever encountered. They leaked from every bypass, shaft, and caps. Worst part was the body's were rough inside, where the bypasses connected to the body. So I ran it 1 pack, and the roughness grinded the pistons down to half their original size, and the shafts just flopped side to side, and had 0 dampening. I emailed them, and they wanted me to send them $90 dollars for them to warranty me another set. I'll never buy another product from them again.
@@TheAmericanUhate whoa! Wonder if they are different now? The UDR ones are NOT cheap, cost wise
@maxsdrc At the time with shipping I think around $180 if I remember correctly. I left a few comments about it on facebook when people asked about them on the UDR groups and lx messaged me, asking me to stop saying negative things lol. I've got all the pictures and screenshots of everything. Still have the messages & emails too
When do we see it go?
All it needs is a motor and esc! Not sure! Atleast a few more weeks
Why put 8 shocks on a superlight rig ?🤔
Purely for looks, lol