I accidentally put whole coffee beans into the ground coffee compartment, which caused the coffee machine to jam. If you remove the water container, there’s an access cover underneath for the brew unit. By opening it, you can access and clean the brew unit. In my case, the brew unit got stuck in an intermediate position, making it impossible to remove. Here’s what I did: 1. I plugged the machine in and turned it on. The brew unit moved under the ground coffee compartment. 2. I unplugged the machine (without pressing the power button). In this position, I was able to scrape out some of the beans from the brew unit. 3. I then plugged the machine back in and turned it off using the power button, followed by unplugging it again. This allowed the brew unit to move into the correct position, and I was able to remove and clean it. I hope this helps someone.
Hello, I see you are an espresso machine specialist, I have the same espresso machine, my problem is that the grinder grinds every second coffee and the grinder does not rotate, each time I have to slightly turn the screw at the top and then after pressing it, the coffee is already grinded without any problems and so until next time, when I want to make a second cup of coffee, the situation repeats itself, I can hear the grinder whining and there's no grind, I tighten the screw again and then they have it. I took out the entire blade mechanism and cleaned it and didn't notice anything wrong with it, do you have any advice? thanks in advance !
Hey i have almost the same machine . Something got stuck in the grinder and i need to access it. But i cant manage to remove the top /front cover. I unscrewed all the screws , even those under the thing that pours coffee but it seems like the plastic is stuck and i am scared to use power and break the plastic. Any advice what might be blocking it?
my insfuser is stuck, if I turn it on the motor makes a rattling sound which means the infuser is not moving. I then turn it of since it may damage the motor, can you give some advise please?
I have a problem: is there any way to unscrew the right side of the coffee machine? The coffee-brewing mechanism has been misplaced and now there is no chance of pulling it out.
I'm referring to the side of the brewer with the red push buttons, which in the video is taken out in 18s. Is it possible to pull off this housing to get inside? During cleaning, the brewer was inserted incorrectly. Normally it should be inserted horizontally, but it was inserted vertically inside. Now it can't be pulled out without unscrewing this cover that divides the brewer from the water container.
how to take off the front panel, I have to get access to the tube that goes from the diffuser out to the output (i have no idea how it's called), the front adjustable tubes where coffee comes out. It's leaking somewhere in the back and most of the coffee is not going to the cup.
@@coffee-machineee Exactly one you have in the video here. Delongi Magnifica S ECAM22.110, I bought it in 2016. And another one last year for my office in 2022, which has a little bit different grinder (worse).
I have dissambled mine because it does not pump water. Now i forgot where some of the screws belong. It is the screws around the heating element. I Think.. it is one long screw, its the only long one.. Can you help me figure out where to put it? I accidently put it in the wrong place, and made a Hole.. 🙈🙈
Because of this video I fixed my coffee machine. Coffee got jammed somehow. Thanks man!
I got it unstuck. FINALLY. THANK YOU SO MUCH
For those who say its too fast, just slow down the playback.
I accidentally put whole coffee beans into the ground coffee compartment, which caused the coffee machine to jam. If you remove the water container, there’s an access cover underneath for the brew unit. By opening it, you can access and clean the brew unit. In my case, the brew unit got stuck in an intermediate position, making it impossible to remove. Here’s what I did:
1. I plugged the machine in and turned it on. The brew unit moved under the ground coffee compartment.
2. I unplugged the machine (without pressing the power button). In this position, I was able to scrape out some of the beans from the brew unit.
3. I then plugged the machine back in and turned it off using the power button, followed by unplugging it again.
This allowed the brew unit to move into the correct position, and I was able to remove and clean it.
I hope this helps someone.
Hello, I see you are an espresso machine specialist, I have the same espresso machine, my problem is that the grinder grinds every second coffee and the grinder does not rotate, each time I have to slightly turn the screw at the top and then after pressing it, the coffee is already grinded without any problems and so until next time, when I want to make a second cup of coffee, the situation repeats itself, I can hear the grinder whining and there's no grind, I tighten the screw again and then they have it. I took out the entire blade mechanism and cleaned it and didn't notice anything wrong with it, do you have any advice? thanks in advance !
Hi, this is the engine in the car, I need to replace it or I would like to change the motor brushes
I would like to know what type of screwdriver is needed to open the coffee maker. Thank you very much
Torx With a hole
@@coffee-machineee thank you! 💙
I did it with a small flat screwdriver that fitted exactly beside the pin in the middle and it "gripped" between two corners of the Torx.
@@johanponken With a hole torx 20
@@coffee-machineee I offered an alternative solution.
Hey i have almost the same machine . Something got stuck in the grinder and i need to access it. But i cant manage to remove the top /front cover. I unscrewed all the screws , even those under the thing that pours coffee but it seems like the plastic is stuck and i am scared to use power and break the plastic. Any advice what might be blocking it?
What exactly is the model of the car written on the small card before the coffee machine
my insfuser is stuck, if I turn it on the motor makes a rattling sound which means the infuser is not moving. I then turn it of since it may damage the motor, can you give some advise please?
My unit is the Magnifica Start: ECAM 22
ua-cam.com/video/ocg7h3rYcKY/v-deo.htmlsi=xUFXYNSoZ6OgXR6W test mode
All lights on bottom row are blinking and the removable grinding part is stuck in the upmost up postion. Any advice?
The brewing unit is blocked, what is the exact model of the coffee machine
Magnifica
@audreypastore5805
ua-cam.com/video/yADxErgHYIA/v-deo.htmlsi=HpOIaciCBidbdSoS
I hope I can help
I have a problem: is there any way to unscrew the right side of the coffee machine? The coffee-brewing mechanism has been misplaced and now there is no chance of pulling it out.
No. only fully understand
I'm referring to the side of the brewer with the red push buttons, which in the video is taken out in 18s. Is it possible to pull off this housing to get inside?
During cleaning, the brewer was inserted incorrectly. Normally it should be inserted horizontally, but it was inserted vertically inside. Now it can't be pulled out without unscrewing this cover that divides the brewer from the water container.
No, you can try to return the to the service mode or to turn the engine with your hands
how to take off the front panel, I have to get access to the tube that goes from the diffuser out to the output (i have no idea how it's called), the front adjustable tubes where coffee comes out. It's leaking somewhere in the back and most of the coffee is not going to the cup.
I'll make you a video
@@coffee-machineee OMG Thanks man!
@@kw_j What is the delongi express model
@@coffee-machineee Exactly one you have in the video here. Delongi Magnifica S ECAM22.110, I bought it in 2016. And another one last year for my office in 2022, which has a little bit different grinder (worse).
@@kw_j ua-cam.com/video/zS88RsHOY7I/v-deo.html
Poz.aparat mi nece da pravi kafu pocne da radi cuje sw pumpa i tu stane neradi vis3
Try it, add decalcification and turn on the machine by turning the hot water knob
I have dissambled mine because it does not pump water. Now i forgot where some of the screws belong. It is the screws around the heating element. I Think.. it is one long screw, its the only long one.. Can you help me figure out where to put it? I accidently put it in the wrong place, and made a Hole.. 🙈🙈
Shorts
Reason that machine wont turn on?
Check the cable, then the connections, the socket, and the switch, if the current reaches the coffee machine, then this electronics
Hi Mate, where can I get the parts ?
What country do you live in?
Can we changed steam wand ?
Why so fast ?? its useless _-
😂😂😂
Idd, absolutely rediculous.. why put in all the work and still produce a useless dissassembly video?
You can literally control the speed of the video yourself
what size torx? thanks
Т20
Unless you're the Flash and can watch this in hypersonic mode this is an absolute waste of time.
thats only a few seconds intro..after that he clearly shows then he starts to unscrew and clean
Super, thx!
Wooow ❤
Too fast. Way to fast.
Record new videos slower?
I have opse