Light Up Your Ride - Can-Am Defender DPS - Bumper & Light bar Installation

How to Wire an LED Light Bar with Wiring Harness & Switch on a Can-Am Defender Recreation Vehicle
Adding an LED light bar to your Can-Am Defender recreation vehicle can significantly enhance your off-road adventures, providing you with improved visibility in low-light conditions. To ensure a safe and efficient installation, you'll need a wiring harness and a switch. In this step-by-step guide, we'll walk you through the process of wiring an LED light bar on your Can-Am Defender.
Materials Needed:
1. LED Light Bar
2. Wiring Harness with Relay and Fuse
3. Toggle or Rocker Switch
4. Wire Strippers
5. Crimping Tool
6. Heat Shrink Tubing
7. Electrical Tape
8. Zip Ties
9. Multimeter (optional)
Step 1: Choose the Location for Your LED Light Bar
Before you begin the installation, decide where you want to mount your LED light bar on your Can-Am Defender. Ensure it's securely fastened and positioned for optimal illumination.
Step 2: Prepare Your Wiring Harness
Unbox your wiring harness and locate the relay, fuse, and wires. The wiring harness simplifies the installation process and ensures safety. Attach the wiring harness to the LED light bar, following the manufacturer's instructions.
Step 3: Install the Switch
Choose a suitable location for the switch on your vehicle's dashboard or control panel. Drill a hole if necessary to accommodate the switch. Secure the switch in place.
Step 4: Wiring the Harness
Here's a basic wiring guide for your LED light bar:
a. Connect the red wire from the wiring harness to the positive terminal of your vehicle's battery.
b. Connect the black wire from the wiring harness to the negative terminal of your battery.
c. Connect the relay's trigger wire to the positive terminal of the switch.
d. Connect the negative terminal of the switch to a grounded point on your vehicle.
e. Connect the remaining wire from the wiring harness to the relay's coil terminal.
Step 5: Secure and Protect the Wiring
Use zip ties to secure the wiring harness along the vehicle's frame or existing wiring looms. This prevents any loose wires from getting caught or damaged during your off-road adventures.
Step 6: Test the System
Before finalizing the installation, test the LED light bar by turning on the switch. Ensure that it functions correctly and illuminates as expected.
Step 7: Secure and Seal Connections
Once you've confirmed everything works, use heat shrink tubing or electrical tape to cover and seal all exposed connections. This protects them from moisture and potential damage.
Step 8: Final Inspection
Conduct a final inspection of your installation, ensuring that all connections are secure, wires are well-protected, and the switch operates smoothly.
Conclusion:
By following these steps and taking your time with the installation, you can wire an LED light bar with a wiring harness and switch on your Can-Am Defender recreation vehicle. Improved visibility during off-road adventures will make your outings safer and more enjoyable, allowing you to explore the great outdoors with confidence.
#canamoffroadlivin #offroad #avoidingchores
🛒AMAZON IDEA LISTS🛒
www.amazon.com/shop/jimcyr
🚨🚨Check out my Can-am Defender Gear List🚨🚨
www.amazon.com/shop/jimcyr?li...
- - - - - - - - - - -
🔗 WEBSITE 🔗
avoidingchores.com
gps.training
🌟POPULAR PLAYLISTS 🌟
Garmin Tutorials
• #GarminTutorials
Outdoor Recreation
• #OutdoorRecreation

[@AvoidingChores]

Gear list can be found here: www.amazon.com/shop/jimcyr/list/15DU1N639X2QD?ref_=cm_sw_r_ud_aipsflist_aipsfjimcyr_M4PBCA66MC0Y9XHVC7Q7

[@StarknightMT_official]

Hello, Are you interested in testing our products? We would like to invite you to test the camo seat cover for your Can-Am Defender DPS

[@wg5768]

I have the same machine. Very few videos on the HD7. A year later,how's it working for you? It sucks that electronics and other accessories come with none, or lousy instructions!

[@AvoidingChores]

yeah the BRP instructions no longer come in the box so you have to download them. I think you need to take a class to understand some of the accessories. Good thing we have youtube.