Hi! Fantastic video! I cannot wait to try it! Can u do another video with how you use acrylic paint and what not for toppings like fudge etc and show us how you epoxy or use the UV resin to seal the whip cream topper? Thank you again! A pleasure to watch.
OMG 😳 Thank you soooooo much, you’re a bloody legend! I’ve been doing some research on the Japanese product, Decodan. As it’s not too readily available here in Australia, it is a bit expensive. I’m heading over to Amazon now to order some foam clay 😊
I know this video is old but I was wondering if you could do a quick video showing how you seal it? It's not in this video and I can't find one. Plus I like how you describe/ explain things.... I got a whole bucket of foam clay and I'm ready to turn a bunch out for my fair next month.
I loved this idea. I bought the same brand,Bohs Foam Clay, from Amazon. I live in AZ, no humidity. When I was done and let it set, within a couple hours, they melted! Any ideas? I have before and after photos.
As a newbie I have several questions. I would like to know if I could just put it on to the Tumblr top itself and do I have to use something over the top if I cannot at the moment afford a UV?
I made a topper like this today and I used UV resin afterwards. Maybe I used too much UV resin because now it looks plastic. It looked a lot better without the resin but I know we need that to make it solid.
Hi! I am so sorry! I somehow missed a bunch of comments! 🤦♀️ I like to do a super thin coat. It will have a shine to it. You don’t have to seal it, but if it’s not sealed you won’t be able to wash it. You could also use a matte mod podge sealer that is waterproof/ dishwasher safe (you would still want to hand wash it though)
You are really pleasant to watch. When they were sharing with your table buddies I was “omg I must know how to do this”. You must have really good hearing. I’m hoping you’ll share what you are charging your customers for these. I know you are much faster than I’ll be so I really have to be real about paying myself and not change them for my learning time. And where do you buy the goodies on top?
Aw! That’s so sweet of you! And I am so happy I read your mind haha! And the cost really just depends on the topper and what “toppings” I use! They range from $10-$20. Also I have my amazon storefront and have all my topper stuff on there under my tumbler toppers list!
Would u be so kind and pls tell me one more time , where can i get the transperbt base for the construction of the cream and one more thing how is this attached to the original topper ? Thank u in advance
Hi! Great question! I actually use a car coaster mold! They are on Amazon. I will grab you the link! And then I attach it to the base with glue or epoxy!
I always use UV resin so I am not sure. But you definitely try it out. I will have to try it out and see how it holds up. I feel like the resin does the best job though
Hi! I’m so sorry I am just getting back to you! 24 hours to fully dry but it starts drying after about 45 min. If you are still working with it you can get it a little wet to stop it from drying faster
I love this!!! It's such a nice change from the other whipped cream toppers. And looks more realistic!! Thank you so much for showing your process💕
This process totally worked! It was perfect the first attempt. Wish I could post a pic!
Hi! Fantastic video! I cannot wait to try it! Can u do another video with how you use acrylic paint and what not for toppings like fudge etc and show us how you epoxy or use the UV resin to seal the whip cream topper? Thank you again! A pleasure to watch.
Hi! Thank you so much! This is so sweet of you to say! And yes I can for sure!! I would be happy to!
Wow so cute. I love how you explain your process in detail, and take your time doing so and not rushing through. Thanks for sharing.
So thankful for this video. I couldn't make the icing tips work, but this, worked better than expected. My strawberry shortcake hat looks perfect!
This made my day and I am so happy this helped! I could never get them to work either and was so happy when I figured this out!
I tried it tonight- OMG!!! I love it!!!!
Found this video today and tried it out…it works!!! So happy with it. Thx for sharing.
did you used resin/epoxy for the finish?
Hi thanks for sharing this technique. By chance do you have a part 2 showing you sealing and constructing to the lid?
Hi!! Yes! I am working on and will have it up soon!
@@TheColoredUmbrella is this video available yet
You are a freaking GENIUS!!!! I don't know how to THANK YOU enough for this video. Absolutely fabulous.
OMG 😳 Thank you soooooo much, you’re a bloody legend!
I’ve been doing some research on the Japanese product, Decodan. As it’s not too readily available here in Australia, it is a bit expensive. I’m heading over to Amazon now to order some foam clay 😊
I just bought that foam clay last week after seeing this. It is so much easier and just better than spackle
This made my day! So happy to hear it!
I know this video is old but I was wondering if you could do a quick video showing how you seal it? It's not in this video and I can't find one. Plus I like how you describe/ explain things.... I got a whole bucket of foam clay and I'm ready to turn a bunch out for my fair next month.
Thank you!!!! This was so much easier than doing it the Spackle way. Plus I love out this turns out!
Great video! Thanks! I was wondering how you apply it to the actual tumbler lid? And then how do you wash it once it's applied?
Hi! I am so sorry I am just getting back to you! This is a great question. I use magnets and I seal it with UV resin so you can hand wash it!
I loved this idea. I bought the same brand,Bohs Foam Clay, from Amazon. I live in AZ, no humidity. When I was done and let it set, within a couple hours, they melted! Any ideas? I have before and after photos.
Thank this helped me soooo much !!! Great video!!!
You deserve more likes and views!
Thank you!
Can you link the resin spray to use?
You are amazing!!!!!
Beautiful
I love this thanks for sharing 🥰
wish you would have shown the epoxy/resin part
So cute!!
Thank you! I was tortured with spackle ugh! Love this!
Spackle was such a struggle for me!!!!
Made this super easy and quick. Question...will this harden or do I need to use UV resin?
Can you use that foam in a bag with a pipping tip?
Omg!!! This is amazing!!!! Love it!!!
So once the topper is done you can seal with epoxy? I’ve read some things that say it won’t stick to the foam clay? Have you had any issues with that?
Thank you so much 😊
As a newbie I have several questions. I would like to know if I could just put it on to the Tumblr top itself and do I have to use something over the top if I cannot at the moment afford a UV?
I made a topper like this today and I used UV resin afterwards. Maybe I used too much UV resin because now it looks plastic. It looked a lot better without the resin but I know we need that to make it solid.
Hi! I am so sorry! I somehow missed a bunch of comments! 🤦♀️ I like to do a super thin coat. It will have a shine to it. You don’t have to seal it, but if it’s not sealed you won’t be able to wash it. You could also use a matte mod podge sealer that is waterproof/ dishwasher safe (you would still want to hand wash it though)
Can we put it in a pipe to do fake ice cream ?dorry for my bad english
I have some whipped cream silcon molds. Could I use this with the molds?
You are really pleasant to watch. When they were sharing with your table buddies I was “omg I must know how to do this”. You must have really good hearing. I’m hoping you’ll share what you are charging your customers for these. I know you are much faster than I’ll be so I really have to be real about paying myself and not change them for my learning time. And where do you buy the goodies on top?
Aw! That’s so sweet of you! And I am so happy I read your mind haha! And the cost really just depends on the topper and what “toppings” I use! They range from $10-$20. Also I have my amazon storefront and have all my topper stuff on there under my tumbler toppers list!
I have my storefront link in the description!
Nice. Can this fit on the hogg 14oz coffee mug lid. The black lid that turns ?
Did you use a clear resin sealer spray?
Wow.. to me it looks like your creating a coral🪸😊
Can you show how you epoxy it ?
What is the clear topper plate you use and where can I purchase them?
If you don't mind where ddo you get your little candies?
Would u be so kind and pls tell me one more time , where can i get the transperbt base for the construction of the cream and one more thing how is this attached to the original topper ? Thank u in advance
Hi! Great question! I actually use a car coaster mold! They are on Amazon. I will grab you the link! And then I attach it to the base with glue or epoxy!
amzn.to/3fRafaB
Do you ever make the ice cream lids for sale
Can u show how u use the resin or epoxy to seal it
For sure! I will upload a video!
Where do I purchase thw box of different toppers
Can you use this for coffee cup toppers
Can you tell use where you got the supplies
Once it sets is it water safe
And how much coverage do u need with resin
I’m working on a video showing how I seal it with resin. You don’t need very much!
Can it get wet or will it become soft again if you get it wet?
I seal it with uv resin after it’s dried so then it won’t matter if it gets wet!
After it’s dry and you put resin on is it best to use uv?
I usually do uv resin but you can totally use regular resin as well! If you do regular resin though just make sure you do a thin coat
@@TheColoredUmbrella have ever done the ice ones
@@shannonlee081509 yes!! Love doing those and have a tutorial coming this next week actually!
@@TheColoredUmbrella awesome can’t wait to see
What size is the coaster mold?
Can i use the mod podge acrylic sealer? Spray
I always use UV resin so I am not sure. But you definitely try it out. I will have to try it out and see how it holds up. I feel like the resin does the best job though
#Genious
Awe nan, thank you!
How long does it take to dry ?
Hi! I’m so sorry I am just getting back to you! 24 hours to fully dry but it starts drying after about 45 min. If you are still working with it you can get it a little wet to stop it from drying faster
can you color the foam?
Yes! I like to use mica powder
@@TheColoredUmbrellawhen do you apply the powder?
can you put epoxy over it
I do with a foam brush or finger lightly.
Would you just brush the epoxy over the top
I just kissed ya!!!! Yes thank you
Thanks did a few more way less look better.