I have had my bear force for 1 year now and it delivers great foam. what I found though was if any soap on the bottle or your hand you can not get a grip to twist the bottle on and off. This summer I ordered chem-X a 2 pack for $50 and they are fantastic, a much better bottle without slippage and has not broken when I dropped it. They are also available singly.
@@patrickvorndran2471 I've seen the Chem-X ones but never bought one. The MJJC isn't bad. But can be slippery also. I'm hoping their new one is better. great point! I have the Stars and Stripes soap though, so I'll try that soon. Heard great things about it.
I have one of these aswell, I only experience the sputtering whenever I put in a orifice that isnt the one that came with the cannon. Might have something to do with the seal not being quite as good, and air coming in through that hole.
Do you know if this has the three layer filtration? I saw your video yesterday of turning the $18 foam canon into a legit one with all the adjustments. I wonder if you can make the same adjustments to this one? What do you think?
@@jefferrrson1x Good question , I did take the element out an no, the Baerforce unit has a single large stainless filter. no 3 part filter/foam generator in it. I did however place an extra felt filter in it to see if makes a difference and I'll be trying that shortly. it's current on back end of the filter which may make a difference also. placement I believe is key. The after market kit I bought wouldn't fit in this unit. too tight. maybe if i shaved some off of it I can but didn't care to spend that much time on it to be honest.
@@talkingwithcars ahhh gotcha. I think this looks great already with no adjustments. Value per cost is great. But man, I might even buy both. Should’ve got both during cyber Monday. Smh. Thanks for the videos sir! I wish I knew my tools like you! And I appreciate the sub sir! Looking forward to your videos! I mainly do rinseless videos and shoe reviews so I hope you enjoy. Thanks!
@@jefferrrson1x Yeah, honestly the Baerforce out of the box isn't bad...nice unit for $28 (brass) and $38 (stainless). I'm not a huge rinse-less wash fan but I did buy Pan the Organizer's version for a trial during the winter on my car in the garage when slightly dusty. Little nervous to use it with salts, etc. on paint. Winter is my struggle for sure.
Mine doesn't produce the foam I'd like, I'm using a Karcher k2, maybe to low psi, I'd dont know, a little dissapointed. But I bought it for 10 bucks with delivery so.. Bought smaller orifices, will try it with 0.9 mm one.
@@victoryensured7137 Based on what I know, you don't need the psi. it's the Gallons Per Minute that's important. GPM of like 1.9 or greater. 2+GPM is best. and change the orifice to the 1.1 in the baggy it came with. Let me know your experience. thanks
@@talkingwithcars I did change it to 1.1, same effect, i ordered it from official Bear force, but mine dosen't have the metal weight ball (plastic one) at the end of the tube also it has brass orifice sizes, bought new - they came today (stainless ones) i think i will try the 0.9. Thank you
@@talkingwithcars The whole unit is SS, only the orifice inside is brass. Bought it from official Bear force. Guess some things changed in the build, the quailty went down a little. But still it should produce decent foam, not happy at all with runny foam like that. Should buy the MJJC pro 2 or the MTM. Still have the new orifices that i bought to try but it's getting to cold for regular washes, in winter i do only rinsless.
@@t3ngo833 absolutely , here's a video a did a while ago when they sent me one ! Let me know if this helps. ua-cam.com/video/VRaWY7M8NeY/v-deo.htmlsi=46QM8npZbhxiEntQ
I bought the same SS model and it works as good as my MJJC V2, MJJC Pro and MTM with my Kranzle…zero sputtering.
I did trim down my hose considerably so it could move around easier
@@flyingbriando5521 yep. the MJJC lineup is great! Can't wait for them to send me their new one soon!!
@@flyingbriando5521 absolutely!
I have had my bear force for 1 year now and it delivers great foam. what I found though was if any soap on the bottle or your hand you can not get a grip to twist the bottle on and off. This summer I ordered chem-X a 2 pack for $50 and they are fantastic, a much better bottle without slippage and has not broken when I dropped it. They are also available singly.
@@patrickvorndran2471 I've seen the Chem-X ones but never bought one. The MJJC isn't bad. But can be slippery also. I'm hoping their new one is better. great point! I have the Stars and Stripes soap though, so I'll try that soon. Heard great things about it.
@@patrickvorndran2471 sold out. smh!
www.chem-x.com/collections/dual-soap-systems-gear/products/chromecannon
Putting in the smaller orifice would probably reduce or eliminate the "gurgling".
@@donlarsenjr2332 I think it's larger but I can try it for sure.
Got 2 of these from temu for €15 each,great foam for agreat price.using autoglym ploar blast soap
@@adamricken4792 cool!
I have one of these aswell, I only experience the sputtering whenever I put in a orifice that isnt the one that came with the cannon. Might have something to do with the seal not being quite as good, and air coming in through that hole.
@@JoaoBMBrentano true. might be just bad workmanship but does the job ! thx
Do you know if this has the three layer filtration? I saw your video yesterday of turning the $18 foam canon into a legit one with all the adjustments. I wonder if you can make the same adjustments to this one? What do you think?
@@jefferrrson1x Good question , I did take the element out an no, the Baerforce unit has a single large stainless filter. no 3 part filter/foam generator in it. I did however place an extra felt filter in it to see if makes a difference and I'll be trying that shortly. it's current on back end of the filter which may make a difference also. placement I believe is key. The after market kit I bought wouldn't fit in this unit. too tight. maybe if i shaved some off of it I can but didn't care to spend that much time on it to be honest.
@@jefferrrson1x Just subbed to you btw- thanks for watching my stuff !
@@talkingwithcars ahhh gotcha. I think this looks great already with no adjustments. Value per cost is great. But man, I might even buy both. Should’ve got both during cyber Monday. Smh. Thanks for the videos sir! I wish I knew my tools like you! And I appreciate the sub sir! Looking forward to your videos!
I mainly do rinseless videos and shoe reviews so I hope you enjoy. Thanks!
@@jefferrrson1x Yeah, honestly the Baerforce out of the box isn't bad...nice unit for $28 (brass) and $38 (stainless). I'm not a huge rinse-less wash fan but I did buy Pan the Organizer's version for a trial during the winter on my car in the garage when slightly dusty. Little nervous to use it with salts, etc. on paint. Winter is my struggle for sure.
Mine doesn't produce the foam I'd like, I'm using a Karcher k2, maybe to low psi, I'd dont know, a little dissapointed. But I bought it for 10 bucks with delivery so.. Bought smaller orifices, will try it with 0.9 mm one.
@@victoryensured7137 Based on what I know, you don't need the psi. it's the Gallons Per Minute that's important. GPM of like 1.9 or greater. 2+GPM is best. and change the orifice to the 1.1 in the baggy it came with. Let me know your experience. thanks
@@talkingwithcars I did change it to 1.1, same effect, i ordered it from official Bear force, but mine dosen't have the metal weight ball (plastic one) at the end of the tube also it has brass orifice sizes, bought new - they came today (stainless ones) i think i will try the 0.9. Thank you
@@victoryensured7137 interesting. keep me posted
question...did you get the Brass version or SS?
@@talkingwithcars The whole unit is SS, only the orifice inside is brass. Bought it from official Bear force. Guess some things changed in the build, the quailty went down a little. But still it should produce decent foam, not happy at all with runny foam like that. Should buy the MJJC pro 2 or the MTM. Still have the new orifices that i bought to try but it's getting to cold for regular washes, in winter i do only rinsless.
Hello, can you tell me a bit more about their future Foam cannon ( MJJC ) can't seem to find any info, thank you !
@@t3ngo833 absolutely , here's a video a did a while ago when they sent me one ! Let me know if this helps.
ua-cam.com/video/VRaWY7M8NeY/v-deo.htmlsi=46QM8npZbhxiEntQ
I bought it and it works great. MJJC Is a good foam cannon but way to overpriced IMHO.
@@geddycostello8439 Yeah there's a few that are even more expensive but you can't go wrong with the Bear! thx
Merhaba Türkiye'de yaşıyorum. bana hediye olarak gönderir misin?
@@erginverimofficial Eğer beni 5k aboneye ulaştırabilirsen ve kargo parasını da ödersen sana gönderirim :)