Hi Michael thanks for posting these videos, I am enjoying my MAX2 40ah last couple months now, and I'm impressed with the adjustability and excellent build quality.. I'd like to know if you have learned approximately how many miles or Kilometers before tires and brake pads typically need replacing, same for typical lifespan of Motors and controllers too. Also if you've tried the PMT tires - would be good to see what the factory thinks of them in comparison to stock tires...thanks in advance and keep up the good engineering!
plz question about p11: my info say: x-100...one my friend say 100amp...and one my friend say 100 percent). but my old nami burn-e only x-60. it is coz controllers are 2x30amp!? thx
Hey I just received my Nami Klima. After setting it up I went to ride it but it’s going so slow. In X mode it only goes 15mph and In E mode is only goes 5pm. I checked the display screen and settings to the manual and it all looks good . Battery is 97%. What is the problem ? Do I have to unplug the speed limiter wires ?
@@myplaxismodelisbetterthanyours same! my P3 setting is stuck off. Won't change to anything which is strange. Otherwise x mode is insane. I wasn't ready lol
I know this was 2 months ago but in case anyone else has the same issue there's a decent video on ua-cam.com/video/bikr-61x2IQ/v-deo.html. Jiggling the brake wire caused it to go off for me but I'm still trying to figure out why my scooter won't accelerate at all after riding 4 km
Not personal experience but I saw a YT video that said plug charger into scooter 1st and then plug it into power outlet after. Just got Klima Max today do can't confirm it but been watching videos on these Nami scooters and that was one I came across. GLHF
@@jasonwu2758 thanks I fixed the issue, when this happens you have to make sure you unplugged the display so the charger and display can both be reset. The issues is the control panel doesn't know how much power the scooter has and turns off as a safety.
@@1Petergreat I'm speculating but I wonder if it has to do with the NFC card reader disabling? That's the only thing I'm guessing as to why. I was able to change it to off but now can't do anything to it since.
Apparently you have to go to basic settings p15 and change it from 0 to 1.Then in advance settings you can adjust 1.2and 1.4 for the front motor according to Michael Sha.
![First Ride After Updating my Nami Klima Max at Fluidfreeride | eScooter POV [4K]](/img/n.gif)
When are you going to have an app like most other scooter?
Hi Michael thanks for posting these videos, I am enjoying my MAX2 40ah last couple months now, and I'm impressed with the adjustability and excellent build quality.. I'd like to know if you have learned approximately how many miles or Kilometers before tires and brake pads typically need replacing, same for typical lifespan of Motors and controllers too. Also if you've tried the PMT tires - would be good to see what the factory thinks of them in comparison to stock tires...thanks in advance and keep up the good engineering!
Michael, I really appreciate you making these videos. I am down to one Electric Scooter and that is the Nami Viper. Thanks!
Great video! I love my Nami Burn-E 2 Max!!
I have p15 settings on my nami burn-e2 max. What are those settings for?
plz question about p11:
my info say:
x-100...one my friend say 100amp...and one my friend say 100 percent).
but my old nami burn-e only x-60.
it is coz controllers are 2x30amp!?
thx
Thank you
Hey I just received my Nami Klima. After setting it up I went to ride it but it’s going so slow. In X mode it only goes 15mph and In E mode is only goes 5pm. I checked the display screen and settings to the manual and it all looks good . Battery is 97%. What is the problem ?
Do I have to unplug the speed limiter wires ?
Yes you have to unplug it, I also have the klima.
hey bro... do u know why my 1.2 or i.3 power setting wont set to 5?
How do you change from. Kmh to mph?
Hi I have a problem with P3 it mark Off and I can’t change it .please help me .
Same here
is there a way to display the bettery voltage on the main screen?
Yes press the power button
Why not just have descriptive labels for the settings in the menu, rather than "p1", "p2" etc?
can u make a tutorial like this like how voro do it?
Do the 28ah controllers set to 50 or 40?
Mine only goes to p13, also can"t change the p7 setting. Any suggestions? I have the burn e 28Ah version.
2:46 What do you mean by 2 circles?
Hi Michael why my Nami max 2 flashing 80,and it doesn't go anywhere,may because I unplug the two or one wires
My P3 settings says off i have tried but it will will not change from off please advise
Can you please make an optional bolt on seat for people like me who struggle to stand up for long periods of time. Thanks
You lazy man 😂
When you have the turbo icon showing (not ON) is that doing anything? Or do you need to activate turbo mode to ON for any speed benefit?
it means the turbo funcion is ready to be active, it does not change anything
@@michaelsha2781 thank you. Just got a Burn-e 2 Max, it's an amazing machine 🙏
@@myplaxismodelisbetterthanyours same! my P3 setting is stuck off. Won't change to anything which is strange. Otherwise x mode is insane. I wasn't ready lol
Is turning on turbo by passing speed restrictor without having to disconnect wires?
No you have to disconnect the speed limiter wires.
Does klima has same dashboard settings? With p1.1?
Yes
How do I remove the brake active icon on the display? When I turn on my scooter when I squeeze the throttle the scooter won't move ?
I know this was 2 months ago but in case anyone else has the same issue there's a decent video on ua-cam.com/video/bikr-61x2IQ/v-deo.html. Jiggling the brake wire caused it to go off for me but I'm still trying to figure out why my scooter won't accelerate at all after riding 4 km
Anyone know how to reset the trip odometer?
Hold - and + at the same time
Anyone know how to reset the mile count for each trip/ or per charge? As i want to track my mileage per day?
pressing +- together
the motor brake use battery ?
it actually charge the battery a little
When I change p7 to 1 then show pass icon on display but when I riding the speed show zero
Can't nobody write this shit down so we can understand it
I had a nami and the charger turns red for about 2-3 seconds then turns back green can you help me with a solution
Not personal experience but I saw a YT video that said plug charger into scooter 1st and then plug it into power outlet after. Just got Klima Max today do can't confirm it but been watching videos on these Nami scooters and that was one I came across. GLHF
@@jasonwu2758 thanks I fixed the issue, when this happens you have to make sure you unplugged the display so the charger and display can both be reset. The issues is the control panel doesn't know how much power the scooter has and turns off as a safety.
Seems a bit difficult, Jezzzzz "KEEP it Simple Stupid" No disrespect Statement comes from a NA group but cuts threw the BS
Can you switch on subtitles on your videos? Thanks.
i will try, not sure how to do it yet
Thank you for this video. The instruction book isn’t that great.
Sir can you help me plz can u send me motor dimensions of namiburn sir please help me I am from India
Why my Nami max 2 .flashing 80
P3 won't let me change from "OFF"
I have the same problem p3 can't change to on and can't change the settings for the front motor p1.2 and P1.4.
@@1Petergreat I'm speculating but I wonder if it has to do with the NFC card reader disabling? That's the only thing I'm guessing as to why. I was able to change it to off but now can't do anything to it since.
Apparently you have to go to basic settings p15 and change it from 0 to 1.Then in advance settings you can adjust 1.2and 1.4 for the front motor according to Michael Sha.
I have milion ideas how to improve my Nami scooter for Dublin conditions but still he waiting me in the shop...
Why my Nami max 2 flashing 80