Це відео не доступне.
Перепрошуємо.
How to add the shuttle race to your Jane?
Вставка
- Опубліковано 21 лют 2024
- This video will guide you through the process of reassembling the Jane loom and adding the shuttle race.
01:14 deassembling
02:13 putting bolts into the shuttle race
02:58 reassembling
04:26 attaching the shuttle race
05:41 demonstrating warping on the loom
I was on the fence about purchasing a Jane 16 shaft, but this just sold me!
I had a bit of a laugh when you were taking about tapping the bolts down, and you went BANG BANG really firmly😄😄 a great explanation of the shuttle race and how to attach it, thank you for the video. Cheers!
Please make a shuttle race for my 34” table loom too! It would make a big difference!
Hi, the widest Jane we make is the 70 and that is 28”. Shuttle race is available for this loom (that is 28” weaving width)
Question for those who installed a race to their Louet Jane. I am having a heck of a time tapping in the square bolts. My bottom beater part had circular holes for the square bolts to go into. Should they have been square? Does anyone remember seeing this when they installed?
@@slimysara7618 Hello, The round hole is correct. The bolt you have is a carriage bolt and the square part is intended to get pulled into the wood so that the bolt does not turn. Look at the video - at 2:14 I talk about this and how you have to “tap” the carriage bolt into place. Take not of the use of a solid table - I explain this in the video.
May I strongly suggest not putting the reed or the top of the beater on until the end. Both landed on my foot while I was putting on the race. Other been asking for a race for quite while and now Jane is finally complete. THANK YOU LOUET
So, will this kit ever become available for the 40cm Jane?
Unfortunately no, the 40cm size is not planned due to the size. However if there is sufficient demand we can re-visit the idea in the future.
Please praise