I was interested in this station, so I took the time to find information on it at the russian radio forums. So here I publish translations of negative reviews. It’s not a fact that all stations are such, but one can definitely say that the quality of them is unstable, and a successful station is a matter of probability. Here are the reviews: 1) Avia-range does not work, HF does not work, single mode does not work. Symbols in the menu pop up sometimes in an incomprehensible language. 2) Also acquired D9000. Avia no, HF does not work. 3) HF does not work 27 MHz, for some reason AM-SW is on. If I turn on the radio 101.100, the radio reception is silent. AM-CW is the issue of the firmware in eeprom. The Chinese are known for their firmware (the old is good, the new is even worse), if you can send it back to the seller. Or somehow exchange. 4) The right channel (B) for some reason began to wheeze. Disassembled picked up another speaker all wheeze exactly, it feels like overmodulation is going on. When switched to the speaker which, in the radio itself, everything goes clean. 5) When I turn on AIR AM, the D9000 emits a very powerful interfering signal (LO signal?). I found it by chance when I set the reception frequency to 123.400 MHz in AM - I received the strongest interference at 144.800 MHz on the equipment, which located about 20 meters from the D9000. With a change in the operating frequency, the frequency of the emitted interference also changes. >> strong interference at 144.8 MHz Yeah, there is. 6) When working in single mode, after working in transmission, the carrier frequency does not turn off, the red LED is on, the channel is busy, but the microphone is turned off. That is, the radio station continues to occupy the carrier frequency channel. Tested at 144 and 433 MHz. It only helps to turn off the station. This cant beat fixed in November 2017. Decision: www.zastone.com/download/showdownload.php?lang=en&id=676 ua-cam.com/video/CNhDl4jcC-s/v-deo.html However, not a single person has already made bricks from the station: facebook.com/notes/zastone-tech/letter-for-zastone-customer/1836824903102399/ However, the link communication with zastone about getting the firmware is long. The answer can be waiting for weeks and not receive it at all. For firmware, you must first redo the cable for configuration from a computer - swap places of RX and TX wires. This is not always clearly stated, so many people bricked stations, when they tried to upgrade, without having to resolder the cable. 7) I came across this device 2 times, ordered from Ali from the ZASTONE Official Store and from the BaofengRadio Store officials (I suspect that these are the same organizations only the name is different in order to generate more announcements, the conclusion is made by how they communicate in case of problem cases). The 1st came with a SQL defect, the SQL began to open 3-5 seconds after the signal appeared, if you start to hear the correspondent on a normal radio then on this D9000 you can miss the first word or even the phrase. I ordered it from the Russian warehouse but had to be sent to China, until last I didn’t believe it would come but the money was returned. Lost a lot of time. The 2nd came, it seems everything works, but the SQL is disgusting, it worked or not at all worked on any interference, and if there was even a small disturbance, the station cannot be beaten off (you twist the SQL completely and the disturbance makes noise also). On the Avia range SQL does not work at all in AM noise crackling disgusting. Bought from 08-09 in 2017. The only thing in the D9000 liked this screen, the sound and modulation to this were not any complaints. 8) Why, with such a huge pixel screen, limit the name of the memory cell to six characters? Why is it not possible to hide the frequency with this name? On the screen are huge, in the memory channel mode there are unnecessary frequency digits and small letters of the channel name above, with a total of six. No microphone sensitivity adjustment. There is a menu item 13/21 Mic Noise Reduction, for some reason its descriptions are not in the instructions, but this is a kind of noise reduction, not sensitivity. Inconvenient setup program. Can not see the name of the channel in the table, you have to climb in the additional menu. There is no possibility to set the direct frequencies of reception and transmission of the repeater, and the separation does not always amount to the standard 5,000 or 0,600. It is necessary to calculate the difference. Yes, simply can not copy / paste the line. The loudspeakers built into the panel wheeze like tuberculosis. I got a REC with a known problem with a carrier in a single mode. Wrote a message on zastonetech.ru/, the third day of silence. It is not clear what the ratio of problem to successful copies of these stations, but this information should be taken into account by everyone who is going to order.
Muy bueno el video, quería saber como se ponen los nombres alfanuméricos a las frecuencias y como se hace , cuando se opera a través de un repetidor, para chequear en directo, o sea, como se pone en reversa. Muchísimas gracias. Lu5adu
Mam pytanie jeżeli chodzi o to radio jak zachowuje się odbiornik czy się nie zapycha i radio staje się głuche przy antenie bazowej bo te chińskie wynalazki tak mają jak to radio się zachowuje jak modulacja mam kt 8900d i to jest tragedia jedną osobę słychać drugą już nie czy te radio też ma problemy z odbiorem czy to jest już inna bajka
What is the packet port for? The book lists it as data as well as TNC in different places. What is the pin out for that packet port? It appears to be an 8 pin DIN connector.
Hell, do you know if it is possible to send a communication with ctcss or dcs. I don't understand how to do ? I have seen that I can do it with the software, but I don't know where I can find a programming cable.Thank you. Damien
The programming cable is separately sold. You can go to the website to buy one. www.aliexpress.com/item/ZASTONE-D9000-Walkie-Talkie-Accessories-USB-Programming-Cable-for-ZT-D9000-Car-Walkie-Talkies-Mobile-Radio/32807538137.html?spm=2114.search0104.3.258.TXToKT&ws_ab_test=searchweb0_0,searchweb201602_5_10152_10065_10151_10130_5490020_10068_5430020_5410020_10307_10137_10060_10155_10154_10333_10334_10056_10335_10055_10336_10054_10059_10332_100031_10099_5400020_10103_10102_10052_10053_10107_10050_10142_10051_10324_10325_5380020_10326_5390020_10084_10083_5370020_10080_10082_10081_10178_10110_10111_5420020_10112_10113_10114_10312_10313_10314_10316_10078_10079_10073-10333,searchweb201603_20,ppcSwitch_5&btsid=5b8866db-4050-4652-a265-b36d994597b6&algo_expid=a625bb1b-c070-4431-8c36-a6b3188ac101-36&algo_pvid=a625bb1b-c070-4431-8c36-a6b3188ac101
Daj linka do sklepu gdzie kupiłeś. Zadowolony z zakupu po takim czasie? Jest problem z crosbandem jak na innych filmach. Modulacja zajebista słyszałem Cie na FMlinku
Ja problemów nie zauważyłem nie wiem co może być spowodowane takim brzęczeniem na crosbandzie jedyne co zrobiłem to moc na 50W zmniejszyłem faktycznie to radio może wypluć 60W ale to jest max więc trochę szkoda żyłować używam w domu i w aucie nie ma problemów co jeszcze w aucie zauważyłem to zwłoka squelch przydatna w mobilu radio tak bardzo nie tnie pojawiają się szumy ale nie ma efektu mobila i zrywania modulacji
a co jeszcze bardzo fajna funkcja FM Transmitera działa transmiter umieszczony w panelu u mnie panel zamontowany jakieś 30 cm od radia samochodowego nie ma problemów z odbiorem czy innymi zakłóceniami dla testów ustawiłem częstotliwość 90.5 dla transmitera i radio eska w radio 90.1 nie ma żadnych zakłóceń czy przebić
RDA1846 based radio. No band preselectors. BNC antena input is filtered for 446 MHz with 2 SAW filters 2 MHz wide only. Bad AM reception , too slow AGC. The software have lot of bugs. No future software updates.Avoid.
I was interested in this station, so I took the time to find information on it at the russian radio forums. So here I publish translations of negative reviews. It’s not a fact that all stations are such, but one can definitely say that the quality of them is unstable, and a successful station is a matter of probability.
Here are the reviews:
1)
Avia-range does not work, HF does not work, single mode does not work. Symbols in the menu pop up sometimes in an incomprehensible language.
2)
Also acquired D9000. Avia no, HF does not work.
3)
HF does not work 27 MHz, for some reason AM-SW is on. If I turn on the radio 101.100, the radio reception is silent.
AM-CW is the issue of the firmware in eeprom. The Chinese are known for their firmware (the old is good, the new is even worse), if you can send it back to the seller. Or somehow exchange.
4)
The right channel (B) for some reason began to wheeze. Disassembled picked up another speaker all wheeze exactly, it feels like overmodulation is going on. When switched to the speaker which, in the radio itself, everything goes clean.
5)
When I turn on AIR AM, the D9000 emits a very powerful interfering signal (LO signal?). I found it by chance when I set the reception frequency to 123.400 MHz in AM - I received the strongest interference at 144.800 MHz on the equipment, which located about 20 meters from the D9000. With a change in the operating frequency, the frequency of the emitted interference also changes.
>> strong interference at 144.8 MHz
Yeah, there is.
6)
When working in single mode, after working in transmission, the carrier frequency does not turn off, the red LED is on, the channel is busy, but the microphone is turned off. That is, the radio station continues to occupy the carrier frequency channel. Tested at 144 and 433 MHz. It only helps to turn off the station.
This cant beat fixed in November 2017.
Decision:
www.zastone.com/download/showdownload.php?lang=en&id=676
ua-cam.com/video/CNhDl4jcC-s/v-deo.html
However, not a single person has already made bricks from the station:
facebook.com/notes/zastone-tech/letter-for-zastone-customer/1836824903102399/
However, the link communication with zastone about getting the firmware is long. The answer can be waiting for weeks and not receive it at all. For firmware, you must first redo the cable for configuration from a computer - swap places of RX and TX wires. This is not always clearly stated, so many people bricked stations, when they tried to upgrade, without having to resolder the cable.
7)
I came across this device 2 times, ordered from Ali from the ZASTONE Official Store and from the BaofengRadio Store officials (I suspect that these are the same organizations only the name is different in order to generate more announcements, the conclusion is made by how they communicate in case of problem cases).
The 1st came with a SQL defect, the SQL began to open 3-5 seconds after the signal appeared, if you start to hear the correspondent on a normal radio then on this D9000 you can miss the first word or even the phrase. I ordered it from the Russian warehouse but had to be sent to China, until last I didn’t believe it would come but the money was returned. Lost a lot of time.
The 2nd came, it seems everything works, but the SQL is disgusting, it worked or not at all worked on any interference, and if there was even a small disturbance, the station cannot be beaten off (you twist the SQL completely and the disturbance makes noise also). On the Avia range SQL does not work at all in AM noise crackling disgusting.
Bought from 08-09 in 2017.
The only thing in the D9000 liked this screen, the sound and modulation to this were not any complaints.
8)
Why, with such a huge pixel screen, limit the name of the memory cell to six characters? Why is it not possible to hide the frequency with this name? On the screen are huge, in the memory channel mode there are unnecessary frequency digits and small letters of the channel name above, with a total of six.
No microphone sensitivity adjustment. There is a menu item 13/21 Mic Noise Reduction, for some reason its descriptions are not in the instructions, but this is a kind of noise reduction, not sensitivity.
Inconvenient setup program. Can not see the name of the channel in the table, you have to climb in the additional menu. There is no possibility to set the direct frequencies of reception and transmission of the repeater, and the separation does not always amount to the standard 5,000 or 0,600. It is necessary to calculate the difference. Yes, simply can not copy / paste the line.
The loudspeakers built into the panel wheeze like tuberculosis.
I got a REC with a known problem with a carrier in a single mode. Wrote a message on zastonetech.ru/, the third day of silence.
It is not clear what the ratio of problem to successful copies of these stations, but this information should be taken into account by everyone who is going to order.
Muy bueno el video, quería saber como se ponen los nombres alfanuméricos a las frecuencias y como se hace , cuando se opera a través de un repetidor, para chequear en directo, o sea, como se pone en reversa. Muchísimas gracias. Lu5adu
Witam mam pytanie odnośnie radia chodzi o repeater mode czy trzeba mieć podłączone 2 anteny czy wystarczy tylko jedna ?
Mam pytanie jeżeli chodzi o to radio jak zachowuje się odbiornik czy się nie zapycha i radio staje się głuche przy antenie bazowej bo te chińskie wynalazki tak mają jak to radio się zachowuje jak modulacja mam kt 8900d i to jest tragedia jedną osobę słychać drugą już nie czy te radio też ma problemy z odbiorem czy to jest już inna bajka
Hello, this radio, has auto rpt, can receive vhf and uhf simultaneously. And as is the reception in quality, thanks
Greetings from chile CE3VNA
What is the packet port for? The book lists it as data as well as TNC in different places. What is the pin out for that packet port? It appears to be an 8 pin DIN connector.
Kolego, jestes zadowolony z radia czy nie? Ja chciałbym takie kupić ale różne opinie słyszałem.Proszę o odpowiedź.Dziękuję.
Hi, Can you work in full-duplex? When I press PTT the sub-band turn mute and I don't receive any signals.
Does anyone know how can I write the channel name above frequencies, only with sw or even from radio? Thanks
kiedy Pan wrzuci nowy film?
Podoba mi się, że wyświetla jednocześnie nazwę kanału i jego freq. Ale na minus te toporne gałki zmiany kanałów.
So does it have 220 in it or not ?
Name stations are visible contrarywise of the frequency?
Yes, you have noticed it well: this transceiver displays the name of the channel (repeater callsign) and its frequency. :-D
Does anyone know how to unlock it for the 220mhz range?
Hell, do you know if it is possible to send a communication with ctcss or dcs. I don't understand how to do ? I have seen that I can do it with the software, but I don't know where I can find a programming cable.Thank you. Damien
I found the solution ! But can you help me How to setup the name of the channel ?
The programming cable is separately sold. You can go to the website to buy one. www.aliexpress.com/item/ZASTONE-D9000-Walkie-Talkie-Accessories-USB-Programming-Cable-for-ZT-D9000-Car-Walkie-Talkies-Mobile-Radio/32807538137.html?spm=2114.search0104.3.258.TXToKT&ws_ab_test=searchweb0_0,searchweb201602_5_10152_10065_10151_10130_5490020_10068_5430020_5410020_10307_10137_10060_10155_10154_10333_10334_10056_10335_10055_10336_10054_10059_10332_100031_10099_5400020_10103_10102_10052_10053_10107_10050_10142_10051_10324_10325_5380020_10326_5390020_10084_10083_5370020_10080_10082_10081_10178_10110_10111_5420020_10112_10113_10114_10312_10313_10314_10316_10078_10079_10073-10333,searchweb201603_20,ppcSwitch_5&btsid=5b8866db-4050-4652-a265-b36d994597b6&algo_expid=a625bb1b-c070-4431-8c36-a6b3188ac101-36&algo_pvid=a625bb1b-c070-4431-8c36-a6b3188ac101
Daj linka do sklepu gdzie kupiłeś.
Zadowolony z zakupu po takim czasie?
Jest problem z crosbandem jak na innych filmach.
Modulacja zajebista słyszałem Cie na FMlinku
www.aliexpress.com/item/Zastone-D9000-Large-LCD-screen-display-Car-transceiver-512-Channels-UHF-VHF-Car-Radio-Walkie-Talkie/32716170076.html?spm=2114.01010208.3.2.rLXZdg&ws_ab_test=searchweb0_0,searchweb201602_1_10000073_10065_10068_10000074_10000132_10000033_10000030_119_10000167_10000026_10000175_10000126_10000129_10000023_10000123_432_10000069_10000068_10060_10062_10056_10055_10054_10000063_10059_10000120_10099_10000020_10000156_10000158_10000013_10000117_10103_10102_10000016_10000114_10096_10000111_10052_10053_10050_10107_10051_10106_10000097_10000094_10000090_10000147_10000091_10000144_10084_10000150_10000101_10083_10000100_10119_10080_10000153_10000104_10082_10000045_10081_10110_10000108_10111_10000191_10112_10113_10000197_10114_10000089_10000086_10000179_10000083_10000042_10000135_10000080_10078_10079_10000039_10073_10000140_10070_10000036_10122_10123_10120_10126_10124_10000187-10120,searchweb201603_3,afswitch_1_afChannel,ppcSwitch_4,single_sort_3_default&btsid=09625e42-4d35-4f50-8cad-199619183e09&algo_expid=ba577614-5b77-4b19-a07f-910834eef4c9-0&algo_pvid=ba577614-5b77-4b19-a07f-910834eef4c9
Ja problemów nie zauważyłem nie wiem co może być spowodowane takim brzęczeniem na crosbandzie jedyne co zrobiłem to moc na 50W zmniejszyłem faktycznie to radio może wypluć 60W ale to jest max więc trochę szkoda żyłować używam w domu i w aucie nie ma problemów co jeszcze w aucie zauważyłem to zwłoka squelch przydatna w mobilu radio tak bardzo nie tnie pojawiają się szumy ale nie ma efektu mobila i zrywania modulacji
a co jeszcze bardzo fajna funkcja FM Transmitera działa transmiter umieszczony w panelu u mnie panel zamontowany jakieś 30 cm od radia samochodowego nie ma problemów z odbiorem czy innymi zakłóceniami dla testów ustawiłem częstotliwość 90.5 dla transmitera i radio eska w radio 90.1
nie ma żadnych zakłóceń czy przebić
Witaj!
Mógł byś wstawić film jak szybko skanuje to radio.
Czy to nabytek z kraju czy z chin?
4 komórki na sekundę
z chin
It says there is a Bluetooth option, has anyone found out how to get Bluetooth working on the D9000?
Can you program using a computer with CHIRP?
I programmed the original software
RDA1846 based radio. No band preselectors. BNC antena input is filtered
for 446 MHz with 2 SAW filters 2 MHz wide only. Bad AM reception , too
slow AGC. The software have lot of bugs. No future software updates.Avoid.
Alguien me sabría decir como configurar el zastone d 9000 para que no coja tantas barbas o armónicos.
Gracias.
José Antonio
Hola, puedo meter la frecuencia de repetidora con salto y subtono?... No encuenctro como hacerlo y quizas vos si. Te agradeceria gracias.
@@MuchoLopez No te se decir,porque me he aburrido un poco de él.
Porque coge mucho ruido de frecuencias adyacentes.
Comment passer de 30 a 50 w avec le zastone d9000, Je ne trouve pas la manipulation à faire
Cordialement. Christian.
!!!SAY SOMETHING!!!
1:20 POLICJA ? SP3JB :o :o :o
unboxing