now take this structural model and add interior walls, you showed the warning error when you selected a wall instead of a structural wall, so how do you take this structural model and turn it into an architectural model?
Hello Balkan, how the steel beam is connected to the concrete wall? Is it simply supported or moment resistant to the core ? Any special clamp, anchor or whatever is needed at this point? Just if you can elaborate more on that. Thank you for the video, made me try on revit
Such good content, thank you! Please, any chance of you creating a tutorial of a roof top pool the building being steel frame and concrete slab floor? Thank you so much in advance!! :D
Hi Balkan, I want to know when you have a K series steel joist or joist girder that is at a roof and the joist is sloping, at the bearing seats; the seat is manufactured horizontal to the bearing point while the joist is sloped. Right now Revit shows the seat sloping so when you cut the section it's not shown correctly. Thanks in advance.
Hi.. I am having an error when i add structural beams or structural walls.."None of the created elements are visible in Floor Plan: Level 1 View...". Googled and applied all solutions of view tab and discipline change ...but to no avail. Hope you will help
so now you have to keep your detail at fine always just to see these beams?? what if you just want to add a decorative I beam to a roof or balcony and not a complete steel construction?..
Hi. Hopefully you read comments. I faced a problem while scaling my project from 1:100 to 1:1000 All my number and axis annotations went huge because of that. I didn't mange to find any solution to that. Can you or anybody else help with that. Sure it is a common problem. However there are no videos of such type.
You have gotten so many students through university with your tutorials, legend!
your videos are 10000000000 times better than the revit classes that i had in university
Thank you so much Balkan❤️
Please create a complete one. Having both architectural elements and structural ones❤️❤️❤️
You're videos are awesome!
Very good content.. Thanks a lot Balkan
Great job Balkan! Keep up the good work!
thank u so much balkan . i love u
youre the best .. sir tnx for this...
Thank you so much!
Thanks a lot from morocco
now take this structural model and add interior walls, you showed the warning error when you selected a wall instead of a structural wall, so how do you take this structural model and turn it into an architectural model?
Can you please do one with cladding, like a warehouse storage build from start to finish
you rule!!! thanks for the help
thank you bro :)
Nice job brooo
God bless you
Very good video
Hello Balkan, how the steel beam is connected to the concrete wall? Is it simply supported or moment resistant to the core ? Any special clamp, anchor or whatever is needed at this point? Just if you can elaborate more on that.
Thank you for the video, made me try on revit
Excuse me, can I request about modeling castellated beam and its connections?
Make a video on rebar detailing in structure. I have seen your previous videos. But plz show detailing of whole structure. A small structure.
i would like to see dome construction like monolithic domes which use an air form to which you add concrete... please...
Hi could you please soften the upper level sounds or use pop filter
COOL.
thank you very mach
Thanks Mate!
Such good content, thank you!
Please, any chance of you creating a tutorial of a roof top pool the building being steel frame and concrete slab floor?
Thank you so much in advance!! :D
the beam system is floating from the end point not sitting on the main beam
See for normal steel structural columns, do you need rotate them 90 degree when there is a change of direction in order for the beams to fit????
You rock
Good job
Balkan architect - try justification instead of raising the bean system
Awesome :)
Hi Balkan,
I want to know when you have a K series steel joist or joist girder that is at a roof and the joist is sloping, at the bearing seats; the seat is manufactured horizontal to the bearing point while the joist is sloped. Right now Revit shows the seat sloping so when you cut the section it's not shown correctly.
Thanks in advance.
How to create new reveal? Please explain
Lave, svaka cast! Jel ima di crna verzija Revita za skinut? Hvala i zivio
What if we want to set the dimensions of the steel coloumn or beam? I mean, not using the template. Could you show the way?
Hi.. I am having an error when i add structural beams or structural walls.."None of the created elements are visible in Floor Plan: Level 1 View...". Googled and applied all solutions of view tab and discipline change
...but to no avail. Hope you will help
Try to type 'vr' and adjust your view range
how do you get your metal decking to actually show up corrugated like that
Great video. For some reason when I cope the beams/columns, only one or 2 works? Could you assist?
Can you teach Piping and Ducting
so now you have to keep your detail at fine always just to see these beams?? what if you just want to add a decorative I beam to a roof or balcony and not a complete steel construction?..
Can you draw 5 floor steel scrctucer 5000m² ground floor area.. please can you draw it
Did you create the floor metal deck family, if so that’s brilliant.
You're too good and too fast, I set up x0.5 speed to watch the video haha
How to calculate the depth of i beam
Can you make the Leeza SOHO building please?
how to perform structural analysis on this structure?
Why not use OWSJ in between the main beams instead of smaller beams?
Hi. Hopefully you read comments.
I faced a problem while scaling my project from 1:100 to 1:1000
All my number and axis annotations went huge because of that. I didn't mange to find any solution to that. Can you or anybody else help with that. Sure it is a common problem. However there are no videos of such type.
Thanks v good 👍
how did he get the steal beam famillies?
How to design scaffolding please help
How you made your levels show in 3d view? Thanks for tutorial.
the beam system going in side the column it should be but same like cope, but how
My trim and extend is not working.
Please, how can I add the Steel tab? Note that I use Rivet 2017.
I had the same problem. Download Revit 2019 for free and you have the Steel tab in your menu. Good luck.
@Wirsha Fatih thanks my dear .
How do you get the numbers
I only can see one type of beam anyone can help me?
nothing you said works, offset, set it 8000....gos way out the screen...I dont understand this...I realy dont..
Total newbie, but I don't get the level lines in the 3d view at 4:02. I just get the box.
Levels in 3D view Only in revit 2019 version
beam system
Hi
lost you in 2 min.....I cant make the offset work...
Clearly you have a lot to offer regarding how Revit works. However, you have no idea how a structural steel building is framed.
You are too fast could you please slow down