Yes. True words. This Playlist is the official course material for etabs here in my college😂🤣❤️ Our faculties also watch this before coming to conduct lab internals for etabs.
Sir all your lectures are easy to understand and are of great knowledge, great explanation, appreciated. Kindly upload similar sort of detailed lectures on modelling, analysis and design of Pile foundation, Retaining wall for basements and Single Shear wall orientation. Thanks.
Sir, When we check the response plot for wind load, the max & min displacements for wind load is showing zero/no response .... It is showing zero displacement.... Pls replay sir.... 😮😮
Sir force/stress diagrams from the display tab is blur i am unable to select it... Please guide me what i did wrong.... I just skipped the part of wind loads as my project was on a small building please help!! Thank you
Hello sir Can I get your project report Because I am also doing a project on sicemic analysis for different shapes of building (i ,l ,c , hexagonal comparing with rectangular) So do please do help Please
@@JitendraChoubisa i mean sir, in this lecture you explained about analysis of this tall building. after analysis you have not explained about design of this tall building. and i did not find in lectures series also.
Select the frame member to which you want to delete the load. Go to assign> frame loads> Uniform (if it is) > Then on dialog box at left side, select DELETE LOADS and click ok. It'll delete load
Go to edit menu, and edit the story grid data, their you'll have to change the story data, see the elevation/height of stories, If they're are less, try to increase it.
hii sir .. good morning in my case i am also doing same building for practice ..but when i go for check model ..it is showing 136 worning ...so how i can work on it sir .. thank you
SIR I FOLLOWED EXACTLY SAME PROCESS AS YOU SHOWM IN THIS TUTORIAL BUT I GOT 1148 WARNINGS, FOR OVERLAPPING AND TOO CLOSED, PLZ TELL ME SOLUTION FOR SAME
Sir you are explaining more deeply and more conceptually even than our most senior faculty in college. Thank You for sharing us your knowledge
That's a huge compliment for me 😊😊 Thank you brother ♥️
Yes. True words. This Playlist is the official course material for etabs here in my college😂🤣❤️
Our faculties also watch this before coming to conduct lab internals for etabs.
Sir I got your research paper.... I'll also publish my project like your paper.... Thanks for these ideas
Sir all your lectures are easy to understand and are of great knowledge, great explanation, appreciated. Kindly upload similar sort of detailed lectures on modelling, analysis and design of Pile foundation, Retaining wall for basements and Single Shear wall orientation. Thanks.
Sir bhaut aacha explain kiya sab chizo ko 😊😊😊
Sir etabs me slab design kese kare with detailing
can we edit by default load combination?
Sir mere mei check story drift vagr ka kuch option nahi aara
what about the meshing of slabs and diaphragms?
Aoa sir ........sir frame, slab ki longitudnal reinforcement kya hoti or kaise krte hn ?? thora guide krdein ya video bna dein
Sir,
When we check the response plot for wind load, the max & min displacements for wind load is showing zero/no response .... It is showing zero displacement.... Pls replay sir.... 😮😮
Sir force/stress diagrams from the display tab is blur i am unable to select it... Please guide me what i did wrong.... I just skipped the part of wind loads as my project was on a small building please help!! Thank you
Sir, can we design semi frame structure in etabs?
Please sir make a for slab design & detailing in ETABS with load combinations
How can i download this research paper
Make a video lecture forDesign a building with frames & slabs detailing and load combination IS Code
Hi sir, can you help me with this error "Story8, B1 & B2 are overlapping each other. Overlap =0. Check at (0 6000 24000) " the overlap is 0
Nice video Sir, can we draw an arch beam in ETABS?
Yes, you can try viewing in Elevation and draw beam by 3 point or 2 point arch method.
@@JitendraChoubisa but when I am selecting elevation there is no option for arch 2 or 3 point. While simply it works in plan mode.
Hello sir
Can I get your project report
Because I am also doing a project on sicemic analysis for different shapes of building (i ,l ,c , hexagonal comparing with rectangular)
So do please do help
Please
Studing m tech
Sir please
I need help
Because I couldn't get more information on this topic
Please
I've a research paper of it, not the whole report
sir, have you did the design of this building?
because i did not found it.
I didn't understand your question brother, Can you elaborate?
@@JitendraChoubisa
i mean sir, in this lecture you explained about analysis of this tall building. after analysis you have not explained about design of this tall building. and i did not find in lectures series also.
Yes yes, I didn't Uploaded that video, but it's simple, its just one click. watch all the videos you'll get that thing somewhere.
Sir load Kam aaraha hai
Sir mera Etabs mai jab design kar raha tha to usne 190 frame failed ho gaya but redesign ka options nehi dia
Redesign ka option nahi aega, apko khud jaake section ki sizes and materials change krna padega
@@JitendraChoubisa sir mai bol rehi hu ki "Reiterate analysis & design" ye nehi a raha hai
Sir, something is mistake in my design i want to delete wind lode how to delete bcoz i want reselect and reassign wind lode?
Select the frame member to which you want to delete the load. Go to assign> frame loads> Uniform (if it is) > Then on dialog box at left side, select DELETE LOADS and click ok. It'll delete load
@@JitendraChoubisa thank you sir
sir, it shows me an error, story 1 to 7(1& 2) are too close. sir how to fix it
Go to edit menu, and edit the story grid data, their you'll have to change the story data, see the elevation/height of stories, If they're are less, try to increase it.
hii sir ..
good morning
in my case i am also doing same building for practice ..but when i go for check model ..it is showing 136 worning ...so how i can work on it sir ..
thank you
What are the warnings?
@@JitendraChoubisa sir my warnings are mostly of the stories overlapping each other or they are too close
Please help
@@JitendraChoubisa I have done everything according to the process shown in the video
What to do sir please help
@@333339501 See, that means you haven't drawn the elements (Beams & Columns) correctly, you have to correct the model.
@@JitendraChoubisa that means I have to draw it again from the start or is there any alternate way to correct it?
Bhai ast first storey pe jyada aata as compare to bottom storey
Sir iska koi solutions batao plz
Thank you!
SIR I FOLLOWED EXACTLY SAME PROCESS AS YOU SHOWM IN THIS TUTORIAL BUT I GOT 1148 WARNINGS, FOR OVERLAPPING AND TOO CLOSED, PLZ TELL ME SOLUTION FOR SAME
Sir jo IJEAT ka thoda or koi video lana 2
PLEASE SIR MORE ONE VIDEO FOR P-DELTA ANALYSIS AND LIVE LOAD REDUCTION
Sir can u share ur publication paper with me
Story drift:
doi.org/10.35940/ijeat.C1005.0393S20
Steel truss:
doi.org/10.22214/ijraset.2023.49234