Fixing my shock, with MATHS! Honda SP1 service and upgrade project part 6. HRC RC51 improvements
Вставка
- Опубліковано 25 сер 2024
- SP1 upgrade and service guide part 6
It's time to tackle the biggest issue on the SP1, the rear shock.
And Dave is deploying the calculator to fix the problems!
Keep watching to see all the details for Dave's servicing and upgrades.
obsessionengin...
Surly I can’t be the only one that has no clue how suspension works. I could literally watch this video one hundred times, and take notes. And I’m fairly sure I’d be none the wiser, probably just more confused. It’s still nice to watch someone who does know what they are doing. I always enjoy the content and the way you deliver it Dave. Can wait to you actually get to ride it.
Hopefully the occasional bit of knowledge slips in there!
This man understands suspension. I know that when it works well a bike feels lovely, and when its doesn't the bike feels out of control and uncomfortable. knowledge is power! Thanks for the video.
Simply superb, you have a gift of being able to explain obvious highly technical matters in laymans terms. Brilliant Dave, keep them coming love your workshop vlogs..
Thanks, that's a great compliment
In all the years of reading magazines and watching UA-cam videos ect I have never known anyone explain anti squat.
Thanks Dave that was very informative.
I noticed that when I was learning about it too!
I like it Dave. And you doing 'Maths' wonder's never cease as every day's a day at school.
Great channel, really enjoy your videos 👍🏻🇬🇧
Brilliant! Watching a master at work. I understood all the words you were saying, while you were saying them, and it made sense. But, the instant the video ended, I was left with a pile of random words - except maybe the pro/anti squat bit, which still makes sense. I wonder how that applies to a shaft drive (my R1200S) - I suspect it works differently in how it affects squat... …or not?
When I first bought my R1200S 12 years ago, at low speed, it felt like it had wooden tyres, and no amount of adjusting eased the problem. I eventually rode it to Birmingham and left it with a suspension expert. He found that the shaft in the rear unit had a tiny blemish, which had worn a grove in an internal seal or bush (I can’t remember which), and that was preventing the shock operating correctly at low speed. Oddly, I would have bet money on it being the front shock - I was getting most of the uncomfortable wooden tyre sensation through the bars.
Now that is interesting, a bit like a too tight chain not allowing the swingarm to move correctly.
I've never played with shaft drives much so would have needed to do my research
Wow, what a masterclass on rear shocks!!! That was amazing. Thanks for sharing all of that.
splendid insight to the internal workings dave, cheers!
Brilliant stuff
Genius Dave! Brilliant explanation & remedy. Can’t wait for your spring time blast down your favourite bumpy roads full bore🚀
Great work Dave, it also looks considerably better now ! Looking forward to the road test 🍻
I get lost in the maths a bit (I left School a long time ago) but all the other info helps understand how this stuff works!! Great vid and many thanks for doing the stuff you do.
Tbh totally didnt understand but still loved the video Dave. As always a pleasure to watch.
amazing content. I learned a lot. thank you !
Fantastic explanation of all concepts there. Followed all the logic and feel much more informed about rear suspension now. Will now spend a bit of time considering how to apply this new insight into my own bike and situation. Ah! Slight problem. I ate ALL the pies and they don't make a spring rated high enough to handle my sag. 🤔🤣In reality I now have a good sense of what I need to acheive with my adjustments to improve the very issue you discussed here, so thank you very much for this upload. Each time I get it a little bit more sorted in my head.🤓
That was excellent. Very informative. The long explanation is most welcome 🤓. I'll look forward to the acid test 🏍️🌬️
Asking a question for the Farm Bends crew and the Marshals International Liberation Front:- How many cream cakes were consumed in the lunch period whilst waiting for the air bubbles to perculate to the top? This is the most important part of the set up, the increase in your body mass. See you at the Mount. ;0) From Angela and Pete and of course the rest of Orange misfits.
I believe only hob nob and digestive biscuits were consumed. Ticking all the food groups in one swoop
Thank you Dave for another great episode I will be doing the same service to mine soon but I will be dealing with the Ohlins shock instead of the factory. Hope all is well and better weather ahead! Cheers from sunny SoCal!
Ah, a better starting point with the gold stuff
Dave I love everything you do and your crystal clear explanations. Might it be worth getting a tripod and including a bit more of the hands on stuff so we can see a few more of the actual maintenance tasks as well as just hearing about them? I'd love to have seen the spring on the lathe for example.
Great stuff….
Great video and quality work as usual 😊
Awesome work Davey very thorough 👌
Loving this, it seems odd that Honda can build such a well engineered bike but almost get it wrong with the spring rate?
If you get it bang on is that didley squat ?
great episode. learned lots. thanks!
THANK YOU. KEEP UP THE GOOD WORK
My OCD is screaming out. The spring needs to be powder coated yellow!
At least it matches the paint 😁
After refurbishing my rear shock, I also shimmed it when I refitted it, just 5mm, but it was still noticeably better in the bends. I've seen people do it 10-15mm before on ZX9r's, not sure if it is necessary to do it that much.
My zxr750 needs lots of ride height, so quite likely the zx9 is similar. Probably a bit excessive with the antisquat, but necessary for the centre of gravity
No harm in the longer vids with more detail. What you had for lunch etc. im guessing corn beef sandwiches 😅
Retro lunch there!
Seems to be a thing from that era with the soft spring / lots of preload . My gsxr 750 was the same at both ends .
Mine next please Wavey👍
I think I need a beer now after all that math
Hi guys - have an SP1 purchased recently with a missing back seat insert panel. Any ideas where one could be sourced?
Enjoying the videos
I do like to work on my own bike but i dont think im going to try doing this 😆
Fantastic video Dave. Are the Ktec kits an improvement for road ring. I just bought an SP this past weekend. Looking forward to setting up sag and squat
Cheers
Jeff
It should help, I'll find out when the roads are dry!
My Brain hurts now Dave.
You're welcome 😁
Dear Davie Doesn't Care at Obsession Engineering. Newton's isn't pressure! It's force 😅
Pressure is force 😂
@@Fake-moon-landing. Arse. Well it's Sunday night and I'm a few ciders in, so you'll have to ignore my comment 😂
Pressed cider uses force...
@@Fake-moon-landing. Now you're just taking advantage of a country boy who's away with the fairies 🍎🍏⏲️
@@Fake-moon-landing.No ! Pressure is force over area. Back to school for you.
It is not simple - but I can repeat the video😂
Is there a reason you never "normally do not grease bolts"?
There's no point, the grease isn't normally necessary
I’m here for the insomnia cure
Welcome along 😁
Hi. What is the pressure in shock?
10 bar
Just got my rear shock back from a full service plating and stiffer spring.
I fitted 6mm spacer at the top of the shock also.
What height would you recommend the forks go in at ?
What tyre pressure would you suggest?
Fingers crossed it rides better.
Regards John
I've put my forks back in the stock position, I'll probably experiment when I ride it
@@obsession_engineering
Tyre pressure?
I have a 2000 RC51 and I just recently picked up a 2006 CBR1000RR. How does the factory rear shock in the CBR compare? Is it also soft like the RC51?
From memory I think the cbr was also quite soft, but I've not ridden one to say for sure
Davey! Whats a good race shock for an 02 f4i? Cheers from Canada.
If you can find Ohlins, k-tech or Bitubo you'd be laughing
There’s no way you’ve got all the air out that shock, I’ve bled hundreds by hand and since I bought a vaccuum pump it’s shown me how you never gets all the air out when bleeding by hand
The question is, did all the hundreds you bled by hand work correctly? I'd suggest they did or you'd have bought a shock pump sooner
@@obsession_engineering yes sure they did, I bought the pump because the company who I’m a dealer for required me to have one (forced purchase really) but……. I’m pleased they did because it showed me that bleeding by hand is not the best way to do it. No matter how much I bleed by hand my vac pump always gets a load more air out
Ps. It’s not a dig btw I really like your channel and you do some great work, your they type of lads I like to chat with over a cuppa
Brain fried , but reaffirmed why I pay clever chaps like you to fix my bikes and keep my monkey boy hands well off them , all bar regular routine maintenance . Just a question if the sp 1 had a ride hieght adjuster would it have made any difference to your original problem ? Don't laugh I'm not a mechanic 😊
Yes, if it had ride height adjustment it'd be faster to test what worked and what didn't
No Honda quality in those parts then dave
I was good until he broke out the maths/science
This is a comment
This is a reply 😏
A vote here for your cure for insomnia 👍
So what you saying with the Squat is your bike Shits itself 🫣🤣🤣