Brilliant. Thanks for taking the time and going through the little details such as the clip on the fuel latch thing. I feel brave enough to remove mine now. Cheers mate!
I removed the fuel filler door catch by releasing the catch from behind with a straight screwdriver on the passenger side then the driver side with a small bent tip pry bar and then it comes out intact.
Hey mate I know this was four years ago, but once you got the fuel cap actuator off, it just dangles there and traces back into the car, what did you do with it, cut it off or trace it out and remove it all properly
Im sooo close, a few weeks away from building another tray. It'll be a 5 part video series. Part 1 - building the tray Part 2 - installing it Part 3 - canopy fitout/12v Part 4 - roof rack build Part 5 - will be a wheel carrier, maybe some pull out draws, and the total cost of the build. Veryy keen to start soon, just need the $$ haha
We made it ourselves in the backyard with the bosses welder. It cost $800 in materials, and we used a bunch of free recycled steel. If we didn't use the free stuff and bought steel instead, it woulda been like $1400
Really helpful mate. Cheers 👍 You may know,is it possible for me to put ml tub on mn chassis . I’m about to do this and have heard there a direct bolt up. Thought you may know if this is true? Cheers
Im not 100% sure, but im gonna say yes. A guy bought something off me a while back with an ml triton and he had an mn tub. Also when we built the tray for the white mn we have, we measured the brackets on the tray off my blue ML and the mounting dimensions are the same. Let me know how you go mate 👌
Hey mate, great video, I have a 2018 mq triton, am about to mount my tray, I was wondering if the stock mounts are already level? Will need mounts need to be made or can the new tray be bolted straight down? Cheers
Hey mate, im unsure about the MQ models.. but i know the ML/MN models, the rear of the tray is like 25mm ish lower than the front.. we went to the local alloy place and bought some 25mm aluminium blocks/offcuts for like $5 and they work sweet as
hectic 4x4 nah - replacing bare ml tub with another tub that has drawers and fibreglass canopy installed. Hopefully I can leave drawers and canopy attached for the install 🤞
Brilliant. Thanks for taking the time and going through the little details such as the clip on the fuel latch thing. I feel brave enough to remove mine now. Cheers mate!
No worries mate i hope it helps 👌 cheers for the support
Siiiiiiick! Removing my Hilux tub this weekend. Fingers crossed it isn't too different! Thanks for the helpful video bro
Yeah it should pretty much be the same i recon, cheers for watching mate
was looking for a video exactly on this. Cheers
I removed the fuel filler door catch by releasing the catch from behind with a straight screwdriver on the passenger side then the driver side with a small bent tip pry bar and then it comes out intact.
Hey mate I know this was four years ago, but once you got the fuel cap actuator off, it just dangles there and traces back into the car, what did you do with it, cut it off or trace it out and remove it all properly
Good Video!! Are you going to do a installation on the tray?
I didnt get much on the tray because its pretty straight forward. But, if theres enough interest i can make one on tips and tricks?
@@joshsparkman2060 All good, Keeps the vids flowing tbere actually really fun to watch
Will a MR tub and tailgate fit a ML/ MN Josh can you let me know please
you’re a legend! cheers boss
Would love to see an install follow up video.
Im sooo close, a few weeks away from building another tray. It'll be a 5 part video series.
Part 1 - building the tray
Part 2 - installing it
Part 3 - canopy fitout/12v
Part 4 - roof rack build
Part 5 - will be a wheel carrier, maybe some pull out draws, and the total cost of the build.
Veryy keen to start soon, just need the $$ haha
Hi just wondering who made the tray and what did it cost, im contemplating one that style for my 2019 MR Triton,
Cheers 👍
We made it ourselves in the backyard with the bosses welder. It cost $800 in materials, and we used a bunch of free recycled steel. If we didn't use the free stuff and bought steel instead, it woulda been like $1400
Thanks 😊
Really helpful mate. Cheers 👍
You may know,is it possible for me to put ml tub on mn chassis .
I’m about to do this and have heard there a direct bolt up.
Thought you may know if this is true?
Cheers
Im not 100% sure, but im gonna say yes. A guy bought something off me a while back with an ml triton and he had an mn tub. Also when we built the tray for the white mn we have, we measured the brackets on the tray off my blue ML and the mounting dimensions are the same. Let me know how you go mate 👌
Will let you know how it goes👍
cheers again for the advice mate✌️
Thanks mate, gonna pay someone to do this shit, just wanted to see what it would be like for them.
Great video thanks
No worries 😁
Hey what size tray did you end up putting on this
Hey mate, great video, I have a 2018 mq triton, am about to mount my tray, I was wondering if the stock mounts are already level? Will need mounts need to be made or can the new tray be bolted straight down? Cheers
Hey mate, im unsure about the MQ models.. but i know the ML/MN models, the rear of the tray is like 25mm ish lower than the front.. we went to the local alloy place and bought some 25mm aluminium blocks/offcuts for like $5 and they work sweet as
@@joshsparkman2060 thanks heaps for the reply mate, appreciate it a lot 👍🏼
Thanks man
All good 😁
Hectic 4x4 is ml tub swap essentially the same??
Exactly the same mate. Did mine 2 years ago
Ohh do you mean will an ML tub fit on an MN? Yeah ive seen it done. I assume it'll sit right on
hectic 4x4 nah - replacing bare ml tub with another tub that has drawers and fibreglass canopy installed. Hopefully I can leave drawers and canopy attached for the install 🤞
hectic 4x4 cheers for the nice vid and info mate.
All the best mate 👌
What does this do? Make it lighter =faster?
The 1st part of the process of installing a tray
Where did you get the tray that you put on?
We made it ourselves. We didn't get it on video, but we plan to make another in a few months and ill record it all
Hey mate who made your tray
Made it ourselve, im making another one soon hopfully with a video on it. Just need to find timee
I don’t like tubs ey, trays all the way