Glowing 3D LASER ART is MIND BLOWING!
Вставка
- Опубліковано 8 чер 2023
- Check out the ASUS Zenbook S 13 OLED (spon): au.asus.click/UX5304
See my full tech review vlog: • Reviewing the SMALLEST...
ASUS on UA-cam: / @asusrogaustralia
--------------------------------
✨support me on Patreon: / jazzastudios
🖌️ GET MY APP, BRUSHES, MERCH and MORE!
➨ www.jazzastudios.com
--------------------------------
JAZZA'S OFFICIAL SOCIALS! - Follow/Sub ↴
▶ TikTok: / jazzastudios
▶ Instagram: / jazzastudios
▶ Twitter: / jazzastudios
▶ Facebook: / jazzaofficial
--------------------------------
#ASUSLuminaOLED #OLED4Everyone #ASUSZenbook #ASUSVivobook #ASUSStudiobook #InSearchofIncredible #Windows11 - Розваги
Dang- what an absolute honor. I am glad I could give a small fraction of inspiration back after taking so much inspiration from you over these last years. Fantastic end result!
It's the guy 😊
LEGEND!!!
If u wanna avoid the frosty edges, leave the brown protector layer on the acrylic and it cuts super neat through!
I think the issue that came up as part of his research is that weeding the protector off afterwards with such high detail/closed loop cut patterns ends up more often than not taking more time and putting more permanent scratches in the material to the point that it obscures the artwork more than it would to just peel the protector off first and wipe it with alcohol like Jazza did
You can remove that brown protector and replace it with a low tack transfer paper, way easier to remove
Use a thin layer of dish soap instead.
Tape also works!
@@bradonhoover3002 I learned to used gorilla tape to do this, it'll stick to all the little bits and I just keep moving it around sticking and removing. Great for tiny bits of paper mask.
I work with laser cutters for my electrical engineering major in college, that moment at 5:56 where the acrylic didn't cut all the way through was painfully relatable
Jazza is really just pumping out ideas, and I’m loving it
Ideal Idea is
yeah, often not generating them, but at least promoting them
Jazza last week: I'm fully out of ideas!
its insane how jazza creates awesome pieces with anything he touches
It is. There's always something new and cool
it's*
@@ClosedCaptions-if7kx It's*
3pm in the afternoon, suddenly Jazza has lazers.
Look again it’s not new 😅
As long as he only uses them for good...
Just waiting for the day when Jazza shows up as a shark with frickin’ laser beams attached to his head.
I would love to see Jazza experiment with printmaking especially drypoint since all you need is an acrylic sheet and a drypoint needle to create your marks.
you should try something like arranging mirrors in a space to reflect a laser beam to create some artwork. it would show if you put smoke or fog over it. like those string arts when you knot a piece of string between nails
I love when you do different types of art mediums.. And this one, definitely was mind blowing
This was really cool! I'd love to see this technique combined with resin pouring one day!
Ooh that would be cool! My only thought would be the light might diffuse differently between the resin and not show the engravings! Worth a try for Jazza because even his failures are great videos (like the Mario pour where everyone kinda had a flop)
I‘d love to see like a „masters series“, where you combine different Art Styles and create even more interesting ideas.. like combine this lasercut idea with epoxid landscapes in an infinity cube
This!! Boosting so Jazza sees
So watching this video I realize Jazza already has a kind of experience with this already. Starting with the painting he did with Chloe Rose, then the Treasure Planet one he did with his Pro Pack. The way he set up the layers reminded me a lot of the way he set up the Doctor Strange piece. It's incredible how what started with painting on Epoxy kind of leads to things on this
For generally using Lazer cutters it's better to keep the film on the acrilic, it helps minimize the fuzziness and in general it's better to do it for everything you can it helps also with wood to minimize charring if you place tape on the area you wish to cut. This is just my experience with using them and it works completely fine for etching too obviously. As long as you have a good ventilation(not even needed just me being really really overly cautious on advice), which you should since you use a Lazer cutter.
7:53 I think the best thing to do with a forefront character would be to reverse the lines and have the “open” spaces be a fill area so that they are etched to be opaque and stand out front the background more 👍!!
You can make a digital artwork (or use a photo) and separate it into the red, green, and blue color channels, and hand etch those into the acrylic like you're cross hatching with a pen, and then when you light those 3 panels up with red, blue, and green lights they'll add together into a full color image.
This is very cool! It’s interesting how you layered the colors to make the perspective details. It’s funny that I would have layered them differently to make the details pop different, but that’s just how my goofy little brain saw it as you were putting it together. I love comparing ideas to improve my artistic style. Thanks for creating this piece and sharing it with us ❤❤❤
It’s crazy how you guys can still come up with new stuff to try😂 idk if you’ve ever done Lino/rubber stamp carving it’s be cool to see jazzs do that
Imo this video combines every aspect of Jazzas channel that makes it special
This is a really cool shadowbox concept, and the result is awesome. Great stuff.
I stopped watching your videos for a while as I got caught up in life and completely forgot about UA-cam, recently I've started catching up and honestly I've just realised as I clocked in to this video that I've been watching your videos since I was 17. I'm 19 now- 20 in Oct that's 3-4 years and it shocks me how amazing it is, how much I've grown and how much I still love watching your videos; they have always been such a comfort, when Ive felt unsafe or if I was sad, if I was angry or happy Ive always come to your videos and enjoyed them. I wanted to thank you for that
Nice effect, Jazza.... what's unique about your channel is your willingness to try ANY artform, no matter how different it is to what you've tried before. You're very brave for trying so many mediums.... well done :)
My only problem with some of these projects is that they're made for a video, and then what? They just go into a closet somewhere? I'd love to see things like this decorating the office (not that we see office all that much haha) or in a "museum," even if it's just a private showroom. These things deserve to be properly displayed and not just set aside.
Use the clear rear panel like did for the back. Get blue, red, yellow, and lightly smokey gray sheets. Engrave the background on clear. Next, take all the pieces that are red and engraved on the red sheet. Blue on blue and smokey gray for the black outline. Then stake the. You might need to get thin acrylic like 3mm.
I think it would be really cool to see Jazza try Glass blowing,
WOW! This was an art form using tools and mediums I've never seen before and you created something really epic. Can you imagine huge movie posters made this way and hung in front of cinemas as ads? That market needs to happen!
Have you ever heard of or seen Michael Garman’s sculpture towns? He has a museum in Old Colorado City. City scapes, and windows sow a holographic projection like you’re peeping in on people’s lives. Amazing. The layers you did reminded me of this museum.
Now we need jazza to just mix and mash all these crazy cool ideas into a mega art project.
I love it!
I especially like how it looks like you just got up to look out your window and Miles is surprised to see you. The acrylic looks like you are looking out of a window ^-^
The different colours are SO cool with this effect 😳
Jazza is always so happy, love you jazza ❤
You always push ideas further than expected Jazza! Awesome work! 💪
This has been one of my favorite videos!
Yes yes yes I’ve been waiting for light painting! Love it! So creative
That has some serious depth! Nicely done!
Wow - this looks absolutely stunning!
I realy don't like perspective pics and thought this was going to be a wash out .... but I'm glad I was wrong dame that final one was so worm and inviting and was truly a work of art 😮 keep up the Amazing work
Absolutely love the result on this one!! ❤
I would love to see this technique using the etching to create highlights. And use the negative space to suggest the rest. Similar method to stenciling white onto a dark surface.
This method made it look kind of like a negative.
Absolutely loved this one
Dude this is just crazy!
This is just amazing!
Jazza, I think you are on a roll right now! Great job to you and your team 🎉
Jazza, thank you for all your videos.
THIS WAS AMAZING! ❤😂 I love miles sm 😊
So glad you could salvage this video, it's incredible!
OMG ILY JAZZA
Jazza that looks awesome!
Very cool, the layering in the final piece works so well! 🤩
(pretty awesome that Miles found out a way to have his hoodie strings ignore gravity 😉i'm just nitpicking ofc)
Woah! I didn’t notice that! Knew something was off 🤔
Really? They look upside down to me as they should be 👀🤔
I'm so impressed with how you keep challenging yourself and your creativity. It helps inspire me to get out of my rut with my art and try something new ✨️. Thank you
Such a cool result
been running an Asus gaming laptop the last year,, its been fairly consistently impressive to be honest,, Im glad your finding new interesting sponsors tho Jazza!! good on ya!
Looks awesome jazza Lynda from South Australia 🇦🇺 xx
The amazing art aside ,i really like how jazza used the product he is endorsed other than just a ad segment which we all skip during the video
props to Jazza for acknowledging a smaller channel as his source of inspiration not a lot of channels would so something like that.
One of my favorite works of yours!
An amazing creation!
OMG!!! That’s so cool. It came out really well. ❤️🥰😍
another incredible video! Your talent blows my mind
Omg that was amazing it's so cool keep the videos coming
Cool video. Looking forward to whatever comes next!
😂 I love when he screams at stuff: "DO SOMETHING!" 😂
That is super amazing ❤
That’s awesome! Man I think if the tag on the wall had it own color layer I feel it would of popped more u know. But I still what an awesome job and can’t wait to see u do more like this 😊
That is so freaking cool! 😍 Oh, the possibilities! 💫
Flame polishing works wonders for cloudy acrylic. :)
That was really cool. Seriously amazing. Well done. 🎉
Your Jazza has evolved.
That looks really cool...gr8 job Lazza!!! Til next tyme...keep those cre8ive juices abrewing!!!
This is so awesome Jazza!!! 🕷️😎
I've bin doing this by rotary tool since I was a kid..glad the ideas evolved
Being a fan of Ideal Idea, this made my day. Keep up the good work!
That looks so good
Looking forward to this. Lasers are cool :)
That final piece was 🔥🔥
Not Jazza calling it Spiderman “through” the spider verse instead of across 😂😂😂👌🏼
Dopest art I've seen in ages👌
This art style would be perfect for a Cyberpunk image! ❤
This does look awesome.
Oh my what an epic artwork
Incredible!!
great video always makes my day ty!
I really hope Sony wasn't the retracted sponsor that you mentioned in a previous video that the sponsor didn't like your end result, because this is absolutely mind blowing!
So cool!!!
good job Jazz I love it .
KILLIN IT JAZZA 🤘🤘
Such a neat idea. I always wondered why the layers hadnt been made different colors for this style art.
I am surprised you didn’t seem to have dont the final color pops on top like red last layer and it only the logo on the wall and his top in red…may the spray can but just those parts only. Idk still turned out neat!
I like this video concept. would be interesting to assign crew particular parts of a final product, to make a combined piece as well.
Try flame polishing the acrylic after engraving and cleaning.
A quick lick with a blowtorch will get rid of the frosted look
This is actually cool!
Wow. That was great.
probably one of your best artworks in all honesty🤩🤩🤩
This is such a cool idea! 😮
Wow, that’s so awesome! 💜🔥
This medium really works with the art.
thats so cooooooool !!!
LOVE YOU jazza
This looks amazing!!!! ❤❤❤
I have been watching your channel for a really long time but have never subscribed and I just had to today. Keep doing great work
Please never stop making the cheesy puns. I love them so much.
So I do laser engraving and if you are getting the frosty edges there are 2 reasons one the power is too high. The other factor is they type of acrylic you are using. You dont really need to go deep at all for this to work you can do a very light etch and you will get the same effect. Also its best to do your artwork mirrored and then flip it so the front facing portion is as smooth as possible. It makes for a much cleaner look.
thats so cool x