CTS Computer to screen machine, DTS Direct to screen exposure machine, LTS Laser to screen machine

CTS laser unit, computer to screen imaging system, direct to screen, computer to screen image & exposure unit, laser to screen direct exposure unit, not wax or inkjet system, direct laser image & exposure unit, resolutions 1270dpi or 2540 dpi, with raster 120 lpi (halftones printing), no need to stick films on screen, file format input in RIP system, frame put on table with left device air lock no need foot pedal, 2-3 minutes finish exposure by TI DMD LDP laser system, then screens auto out and unlock to take out for the next screen developing process to get a fine halftones. Save accurate exposure alignment and labor reduction, elimination of film positives, equipped with cooling device to large extend the laser lifespan, silent and no any noise during exposure. 1 procedure of CTS digital screen making to replace 5 procedures of from the conventional process, widely used in precision textile, decal, graphic, packaging, PCB, label decoration industry. Special offer now. We are open to offer samples based on your design to easy check the exposure quality. We also have smaller unit if you have limited dark room. Feel free to let us know if any interest, thank you.
Specification:
Machine type CTS100
Maximum frame size 900 X 1000mm (35'' X 39'')
Maximum exposure size 800 X 900mm (32'' X 35'')
Imaging System DMD technology
Laser Power 20W/25W
Laser Wavelength UV405nm
Focus System Dynamic focus
Resolution 1270dpi/2540dpi
Emulsion thickness Solvent resistant emulsion 3μm-150μm, water resistant emulsion 3μm-350μm
File format 1 bit TIFF
Exposure time 1-2min depending on emulsion sensitivity and thickness
Temperature 18 - 24 ℃,
Humidity 40%-70%,no condensation
Power source AC220V/110V, 50/60Hz, Single phase
Power 4KW