EGR Blanking Plate How To Installation Guide Ford Ranger also PX, Mazda BT50 2.2 L & 3.2 L
Вставка
- Опубліковано 7 вер 2024
- Thanks for checking out this vid.
Sorry in advance for the music etc I was fairly new to making UA-cam videos :/
I am currently a totally unsponsored channel and do these videos completely free which take many hrs to make, hit that thumbs up for me and consider subscribing.
And again make sure you subscribe to my channel!
Also if anyone is selling EGR blanks that would like to have a product listed here for our subscribers please let me know.
FULLY UPDATED FROM OUR ORIGINAL VIDEO THAT HS OVER 72,000 VIEWS thanks !!!
NOW WITH EXTRA COMMENTARY HELP AND EXTRA FOOTAGE.
We couldn’t find any video's or even half decent photo instructions anywhere on the internet so i decided to do the research and tackle it myself.
It also sounds like I said TX Ranger but it’s definitely PX haha.
So here is the Australian Ford Ranger “PX” MK1 EGR Blanking Plate Block off installation video I made to help out fellow UA-camrs. I use UA-cam a lot so thought I’d pay some back.
- suits Ford Ranger & Mazda BT50 B32 PUMA TDCi 3.2L and 2.2L 2011-ON. MK1 Australian Version but also will be useful for most EGR systems.
EGR valve replacement
Ford Ranger EGR valve replacement
The Exhaust Gas Recirculation (EGR) valve recirculates a portion of the exhaust gas that would normally just go through your Ford Ranger’s exhaust system, it mixes the exhaust gases in with the freshly made air inside the intake manifold just before the main inlet on top of your engine. These gases are then burned off in the normal combustion process.
Reducing the volume of emissions going through an exhaust system does lengthen the life of the catalytic converter and helps the environment.
Most modern vehicles have an EGR valve.
ISSUES:
The PX Ford Rangers EGR valve can fail once it is full of gunk and/or the valve gets stuck open. When this happens the EGR valve will need to be replaced which is not cheap.
Its also an electric motor activated EGR valve so there could be an issue with the wiring.
When the EGR valve fails, the Ford Ranger’s check engine warning light will usually illuminate on the dash and the vehicle may run rough because the engine may run lean or rich, depending on why the valve has failed.
Q. What is an Exhaust Gas Recirculation (EGR) valve?
A. The EGR valve controls a passageway between the intake and exhaust manifolds. When the EGR valve opens, exhaust gasses flow from the exhaust manifold through the valve and into the intake manifold, keeping NOx emissions within state limits.
Q. Why block off the EGR supply port?
A. To keep your intake and engine CLEAN & PERFORMANCE HIGH
A. These hot, oxygen-depleted, exhaust gases displace (dilute) the cooler incoming oxygen-rich air and has a quenching effect on combustion and combustion temperatures. This reduces engine performance and raises intake air temperatures dramatically.
Q. What are the benefits of blocking the EGR passageway?
A. Many.
1) Cooler intake air temps.
2) More performance.
3) Less engine oil contamination.
4) Cleaner engine oil means increased engine life.
5) Cooler exhaust temps.
6) No Soot in intake which keeps vacuum / boost lines clean
Q. What are the negatives of blocking the EGR passageway?
A. Not Much
/TOOLS & SERVICES I USE:
○ Where I find my music (Epidemic) - www.epidemicso...
And make sure you subscribe to my channel!
Enjoy!
Copyright © 2020 Remotely Interesting. All rights reserved.
No part of this video (including thumbnail images or written copy) may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the written permission of the copyright holder.
All music contained in the video has had the granting of a ROYALTY-FREE LICENSE