Good job, I put lifts on all my ATVs. One thing which makes it easier to work on them is to wash them after you get them all muddy, then you don't get as dirty working on them!
Hey man you really saved my ass with this video. Looked at the kit and wondered "Wtf is this?", after seeing this video I know now what those parts are to and how to do it myself. You do a lot better job than 95% of people who do this explanation videos. Thanks a lot again!
Good job explaining the process you done a lot better than most if the older guys on here!! Good to see a young man do stuff for himself without help way to go.
@@jacobweber5471 what are the ITP steel rims offsets on the rear of your four wheeler!! Are they 2+5 or 5+2!! I'm just wanting to know because I'm buying 12-inch rims for the rear of my 420 rancher!! Thanks a lot for the video!... 💯❤️🤍💙🙌👍👍
Wesley Davidson I did not have to trim any plastics! However, I have put 30mm spacers on it and that made the tire rub the plastics when the suspension was compressed but it was too little to trim any plastics.
While you had it apart you should have adjusted you shocks. Your shocks are adjustable to also give u more lift yours were set on stock, watch a video on how to adjust shocks its easy.
My man you should power wash your machine before u install stuff , and when you're done mudding, your machine will last longer and not rust and rattle like look like shite
I have had this lift installed on my Honda for 7 months now. I have jumped the 4 wheeler, rode it on two wheels, done wheelies, mud rode with it and I have yet to have a single problem.
@@jacobweber5471 you have quite a few more years to go before you realize what I'm saying. Maybe the bolts stay tight for awhile, but by design it's the worst out there. When it goes bad it won't be minor.
@@p.b.sHUNTING I check the bolts often to make sure they stay tight. I have not had one bolt come loose. The only negative part to having a lift is that it puts more stress on the cv shafts (axles).
@@jacobweber5471 supremesuspensions.com/products/2012-2013-honda-foreman-500-2-full-suspension-lift-kit?variant=28864974946384 This kit uses the upper mount for the shock, what you're using is a terrible design, and unsafe. Not you're fault, but no way I would ride around with a strap pinching the control arm to keep another bracket inline.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Good job, I put lifts on all my ATVs. One thing which makes it easier to work on them is to wash them after you get them all muddy, then you don't get as dirty working on them!
Hey man you really saved my ass with this video. Looked at the kit and wondered "Wtf is this?", after seeing this video I know now what those parts are to and how to do it myself. You do a lot better job than 95% of people who do this explanation videos. Thanks a lot again!
Good job explaining the process you done a lot better than most if the older guys on here!! Good to see a young man do stuff for himself without help way to go.
Thanks for the video. You did a great job of explaining how you went about installing the high lifter.
Thank you!
I watched this to see how the quality of the kit was and now I know how to install it! thanks!
Really like what you're doing!! DIY young man!! 💯❤️🤍💙🇺🇲🙌👏👏🥳
Great video young man. I reccomend one thing though lol.. wash it first
That thang is dirty 😂. But great video
that was gonna be my only real comment too...
Super awesome video thank you so much for sharing
In the front of the four wheeler your suppose to put it at the top of the shock
It goes on the top because I want to lift my four wheeler two
Good job! Nice lift kit.
I would grind a half inch of the bracket imho😊
Why can’t you turn the spacers inward
what size tires on the front n back, is that stock honda rims. If so I am wanting to run the same setup only with Zilla tires.
They 27 inch ITP Mud Lite XL's on stock rims.
@@jacobweber5471 what are the ITP steel rims offsets on the rear of your four wheeler!! Are they 2+5 or 5+2!! I'm just wanting to know because I'm buying 12-inch rims for the rear of my 420 rancher!! Thanks a lot for the video!... 💯❤️🤍💙🙌👍👍
i have to do the same setup. did you have to trim any plastic?
Wesley Davidson I did not have to trim any plastics! However, I have put 30mm spacers on it and that made the tire rub the plastics when the suspension was compressed but it was too little to trim any plastics.
Good video I was wondering if it was a decent lift kit and if it was to hard but I’m gonna get it now
This video was definitely worth watching
What size spacers should I get with 2 inch lift and 28s
Those front axles have a real high pitch , I’d say it will be hard to keep axle boots on it
I haven’t had a problem yet.
What about irs 4 wheelers does the same lift still work
You made a cool video
Yes
Thinking bout getting the mud lite 2 tires, how do they do in the mud ?
I haven’t had any troubles with them. They have held up well in the mud. They eat through just about anything.
Do you have the brackets on backwards the front goes to the back the back goes the front
I’m still looking for a video on how to install a 2022 grizzly 2” lift. I guess no one knows how to that one yet.
how do you like your tires?was thinking about buying same.
I love them.
what year is your bike?
2011
What your is you Quad My 04 rancher has a single Shock in the back.
2011 Honda rubicon 500
@@jacobweber5471 Thank you
Awsome vid brother
What year is it
2011
Do you know what brand shocks your running having hard time finding after market shocks for my 06 Honda foreman
Not sure. They are stock.
Put a wheel spacer so it doesn’t rub up against the tire in the front
I did just didn’t film it!
Do they make a 2inch highlifter lift kit for a 2005 Honda foreman ?
Yes they make a kit.
@@jacobweber5471 will I need spacers too run 28s or springs or anything?
@@Zentifywyd probably will need the same things I did to mine u less you are going to cut plastics.
@@jacobweber5471 what's all did u do too yours and can u either make a new vid on this or send the links
@@Zentifywyd highlifter 2in lift kit and tusk wheel spacers.
what fourwheeler? bruin 350?
2011 Honda Rubicon 500
@@jacobweber5471 my bad
Do you think you could clear 28s after the lift?
Brady Ladd yes I believe so. However when you put spacers on, 28’s might rub on the back fenders.
What size tire
27"
While you had it apart you should have adjusted you shocks. Your shocks are adjustable to also give u more lift yours were set on stock, watch a video on how to adjust shocks its easy.
Scott Locklear I didn’t want to mess with the shocks because with the lift installed the suspension is way more stiffer than stock.
Your not getting any ground clearance in the rear. Just more wheel clearance. The rear axle is not being lifted only the atv is.
Correct
Grind the corner of the bracket for clearance
Wleckelt Leckelt Good idea! I threw on some 30mm spacers and it fixed the problem, and made it look even better!
Awesome
Great Video...thanks I think I can do it also.
Dude I got the same tires and getting the same luft
For me im the type of guy I got to have the same size height and width tires for the front and back of my atv
U need an inch spacer dawg
Man you don’t clean your bikes before you put them up
Good job.
My man you should power wash your machine before u install stuff , and when you're done mudding, your machine will last longer and not rust and rattle like look like shite
That's a janky looking kit. Definitely won't be installing this lift
I have had this lift installed on my Honda for 7 months now. I have jumped the 4 wheeler, rode it on two wheels, done wheelies, mud rode with it and I have yet to have a single problem.
@@jacobweber5471 you have quite a few more years to go before you realize what I'm saying. Maybe the bolts stay tight for awhile, but by design it's the worst out there. When it goes bad it won't be minor.
@@p.b.sHUNTING I check the bolts often to make sure they stay tight. I have not had one bolt come loose. The only negative part to having a lift is that it puts more stress on the cv shafts (axles).
@@jacobweber5471 supremesuspensions.com/products/2012-2013-honda-foreman-500-2-full-suspension-lift-kit?variant=28864974946384
This kit uses the upper mount for the shock, what you're using is a terrible design, and unsafe. Not you're fault, but no way I would ride around with a strap pinching the control arm to keep another bracket inline.
@@p.b.sHUNTING hilglifter makes great products. Yea all have our own opinions. Maybe try keeping them to yourself