Sir your video was more than awesome😊 I scrolled many videos and watched it but 3phase is somehow complex to understand. You made me my concept cleared sir. Thanks a lot🙏
Why in the web page say: + Two thyristors of a pair will not conduct at the same time because it will lead to a short circuit. But with 6 diodes in full wave rectifier not generate a short circuit?
Hi please can you help me with this problem. Urgent! Question: why is at R load after firing angle wt=90 Vout is non-conducting mode? How can we fix this?
the voltage after rectification and filtering with a capacitor is multiplied by the square root of 2, which mean VDC-1.41Vac, am i correct? so what it the VDC value as per your video?
Hello, I designed a 3 phase full wave controlled rectifier in matlab simulink. My question is: The average value of the DC output voltage is measured correctly according to the theoretical equation, up to the thyristor trigger angle of 60 degrees. but the average value above @60 degrees contradicts the theory. how to solve the problem?
i found it better then all other video in youtube.since i have watched them all.but your video clears all confusion.thanks a lot
Hello, by chance, don't you have a code in the Arduino IDE to adjust the firing angle of a three-phase controlled rectifier (SCR) circuit?
Very detailed explanation ..Pura doubt clear hogaya..Book dekhke dimag ghum jara tha
Very good that you include the load and phase currents in the explanation. Top!
Which country bruh !?
What a grip on concept sir ....hands off 🙌🏻🙌🏻...even my class teacher didn't explained 50 % of the topic 😅...
Very neat and clear explanation 💞💖
love u boss,,, after seeing soo many videos i got my ans here...
Thanks so very much for this video. It's the best explanation I've seen of 3 phase full wave control.
Sir your video was more than awesome😊
I scrolled many videos and watched it but 3phase is somehow complex to understand.
You made me my concept cleared sir.
Thanks a lot🙏
Great job. Thanks for the lecture
Detailed explanation. It helps me a lot. Tks, do more
Bravo beautifully explained
Nice presentation .................. I have also done some videos in 3-phase rectifier, but this one elaborates completely .
Hello, by chance, don't you have a code in the Arduino IDE to adjust the firing angle of a three-phase controlled rectifier (SCR) circuit?
Don't know who are you or where are you from! But you helped me a lot brother. God bless you. Best explanation
Please make videos on whole power electronics series.
thankyou very much habibi
I wish i could find this video lil sooner..still amazing presentation..tn q sir.
Clear and simple explanation, well presented. Thanks
excellent explanation!!!
Great Explanation Sir
Great work sir. Please do more
Very well and detailed explained in an understandable way. Perfect. Thank you Sir. Goood luck.
great explanation and like all the informative graphs. thanks
Thank you for everything you give us and we hope you will allow us to translate
Great lecture, excellent explanation
Great job man! Keep it up, your videos are actually really helpful.
Thank you!
Very nice explanation .best I have ever watched . Please try to say slowly .
Thanks
@vikas Gupta, you can very the speed of video in youtube while seeing video.
Excellent explanation!
Great video information ❤thank you for sharing your knowledge and experience 🇵🇭🫡
Very good.
Hello, by chance, don't you have a code in the Arduino IDE to adjust the firing angle of a three-phase controlled rectifier (SCR) circuit?
Great ❤️
Thank you very much sir
Why you stopped making videos???
Best explanation thanks
Thanks
Many many thanks.
You explained very well sir❤️❤️.I love to see your next video 😀.
Very good
Where were you bro ......world needs you🔥
Best👍
Sir voice is not clear.. explanation is awesome😍
Why in the web page say: + Two thyristors of a pair will not conduct at the same time because it will lead to a short circuit.
But with 6 diodes in full wave rectifier not generate a short circuit?
Thanks alot
Sir can you explain this circuit driver circuit
the video is good but how to control the output voltage...???
Hi please can you help me with this problem. Urgent!
Question: why is at R load after firing angle wt=90 Vout is non-conducting mode? How can we fix this?
Nice presentation sire...
what if the alpha is 45 degree?
Awesome explanation. Tnx a lot.
Plz inform me about the software by which you draw the curve.
why is the conducting interval of thyristor fixed at 120 degrees?
I will skip this question 🙂
😂
the voltage after rectification and filtering with a capacitor is multiplied by the square root of 2, which mean VDC-1.41Vac, am i correct? so what it the VDC value as per your video?
Sir can u share the video for the 12 Pulse controlled rectifier.
In this case each SCR is conduct for. 60 degree angle
sir for alpha greater than 60 with r load average thyrister current and source current would be less than Idc/3..????
What about the Power Factor of these rectifier?
Capacitor value calculation please
Hello, I designed a 3 phase full wave controlled rectifier in matlab simulink. My question is: The average value of the DC output voltage is measured correctly according to the theoretical equation, up to the thyristor trigger angle of 60 degrees. but the average value above @60 degrees contradicts the theory. how to solve the problem?
Slides of the course please
why there is no subtitle explain for english.?
What does point of natural commutation means
Scr will turn off naturally
Which load he took here r load or else load
👏👏👏👏👏👏👏👏👏👏👏
Why does scr start conducting only after point of natural commutation
See this video...ua-cam.com/video/IJmjSD30qJM/v-deo.html
can you share power point slides ? please
SIR HOW GET THIS
PPT
How the firing angle measured from 30 even triggered at 0?? Anyone
Can you send this video ppt
hero alom voice?!;!;!
Very nice