yes and no you can make something that looks like a railgun but it wont work the same way a railgun does, railguns actually use a pair of rails the projectile sits in between, and the way the magnetic field accelerates the projectile is different but maybe im wrong
Definitely not high school unless you get into some kind of crossover technical school thing. There's a fair bit of math involved, so you won't get much about them until you get into engineering classes in university.
Hey kan, remember when you did the forklift challenge. U said u would maybe make a warehouse with I think scrap man. Will u make a warehouse, or maybe a “ Making a warehouse“ series? I doubt it but I think it would be cool.
Well Kan demonstrated in a previous video how there was something wrong using the smaller propellers to create forward thrust. That's why i recommended a helicopter instead since that seems to work better.
Master Channel You guys know they're really just for tourism, right? They're expensive to build, even more expensive to maintain, and impossible to repair. They aren't good for the environment either. Every single one is equipped with lithium ion batteries that are considered precious metal. Oh and they weigh TONS, almost as much as lead. On top of that, the mining process alone is way more dangerous than fracking, and causes environmental damage. If that wasn't bad enough, the power source for maglevs is usually coal or radioactive substances. Not really saving the environment. Oh and they are the world's most dangerous vehicle. Basically the worst vehicle ever. Unless you want to move at outrageous speeds just to arrive an hour early. By the way, don't try to diss me on this, my entire college thesis was on this topic.
Daniel Rubia I don't think Black Panther was the best movie ever, but it's up high on the list for me. The only flaws it had was that vibranium is the explanation for literally everything in the entire movie, and that yuri existed. I freaking hate people like that.
i like how kan is one of the few people that uses mods like theyre official stuff i mean same but still also the first thing he thought to make was an engine i love you, kan
i would think so, if you have an output shaft on both sides, by using suspension or motors to glitch it to the other side, or welding two motors together so that you have an output shaft on either side or orient the motor longitudinally (drive shaft parallel to the length of the car) and hook it up to a differential mechanism that splits it to both sides
If you took a third magnetic motor at 12:20, and hooked it up to a drive shaft leading to the unpowered wheels, you could have a reverse. And if your worried about being able to turn with these kinds of engines, there are these farm tractors or construction rigs that have a waist. All of their turning comes from bending in the middle, which could be mimicked via two pistons on each side of a hinge, which is located in the middle of the vehicle.
That analogy of electric engines with the viper coil and the magnetic field isn’t just an electric car, it’s the magnets system in any automobile, gas or electric
when you said it makes it spin, You spin me right 'round, baby, right 'round Like a record, baby, right 'round, 'round, 'round You spin me right 'round, baby, right 'round Like a record, baby, right 'round, 'round, 'round
your "L shaped distributor piece" is causing the wobble to the engine. you need to balance the drive shaft. leave the L shape painted black and set sensors to black, fill in the counterweight part of the distributor and paint it white so it wont trigger the sensors but will balance the weight. love the creativity btw
I think the magnet has a. double meaning. It's magnet for all types, therefore making it north and south, the regular magnet, which makes it a universal magnet.
Make a giant rc car, I have plenty and I know that with one electric motor you should be able to make it have tonnes of torque if you gear it down onto a driveshaft.
lol when the car flipped from the "motor being too powerful", what actually happened was kan made reaction wheels, where a wheel-like object with a large mass is spun to make a reversed spin on the connected object. usually used in space stations.
If you want to test which engine is faster, then connect then on diferential "ouputs" (semi-axles) and if "input" (cage) rotates, then those engines have different rpm, and direction of "input" also show which one is faster/slower Add bearing to timig "L" and if you want to go in reverse, "L" pointing right will turn horizontal part around, so it will look like mirrored "L"
Off topic, but electric motors, which are in game, use coils of copper, usually 3 or 6, alternating current like u did here, to create a costant torque. This just makes the same motor bigger and stronger, but u build it yourself.
Rc stuff doesn't use the outer permanent magnets anymore. They use inner permanent magnets, same with e-bikes, same with e-vehicles. I've got an e-bike with a BLDC that functions VERY similar to your 8-sided electromagnet motor, only difference is mine uses 6 electromagnets.
Alternator's, generators and motors are all pretty much set up the same way in regards to magnets and copper wire. It just how you want it to work. For instance, you can generally take an electric motor and turn it into a generator by spinning the shaft to produce electricity instead of receiving it. Also, the only difference between a generator and alternator is how the internals work and an alternator can ge called a generator in the simplest of terms. Mechanical is always going to have more torque than mechanical because it is physically moving something. While eletrical or propulsion has to rely on the magnetics field generatad to turn the object and the only way it's going to get more torque is with a larger magnetic field which will make the design bigger.
if you don't know what a stepper motor is (i can't imagine that), it is a motor with 2 sets of coils that can be powered it both ways + to - and vica vera. thatway you can rotate it step by step in the direction you want. irl those often have 200 or more steps per revolution but it would be great to have at least 4 or 8.
Loved the vid deff do what you said but also try some new out of the box things with this mod it opens up so much new potential for the game and creations
Question? if you only used a single magnetic motor with the 4 set of magnets and link that up with a transaxle drive system you could reduce lag. have multiple gears including reverse and more power (maybe less lag too)?
You should apply the high-speed magnet motor to wing-mod propellers, cause I think they spin a LOT faster than engines can spin bearings.. might be janky as hell, but could maybe get you off the ground?
Can you make a Maglev using static and moving magnets? I think that the fact there's no friction then it would be a very efficient train. It'd be very cool. Also... If you add reducing gearboxes it'd make it more powerful without addingore magnets and lag the game.
hey kan what about using logic to sequence in one direction and then reverses in the other and i think it should be ether per motor or one set to rule them all
Kan: "I'm not very big on ascetics"
Also Kan: must paint every bearing in survival
Is it possible to make a magnetic railgun?
probably
Moonbo tried One too... mabey not direktly a railgun but you can build some
you probably can make a glitchy one
He could do that
yes and no
you can make something that looks like a railgun but it wont work the same way a railgun does, railguns actually use a pair of rails the projectile sits in between, and the way the magnetic field accelerates the projectile is different
but maybe im wrong
you know it's a genuine kAN gaming video when every other phrase in the first minute is "and we're back"
You can make the torque adjustable by connecting an engine to the magnet blocks and regulating its speed
Tomek Styn I was gonna comment this
alternatively (or in addition), you could connect the magnets ring wise to an AND gate.
using an engine to power an engine lel
The second engine may reduce torque just being connected to it.
@@edjuancho6597 too late
I just realized that electric engines and stuff like this is not a common subject in school
Definitely not high school unless you get into some kind of crossover technical school thing. There's a fair bit of math involved, so you won't get much about them until you get into engineering classes in university.
I guess it depends on the country You are going to school.
Right, it's part of class 8 in Germany, Thüringen I think.
@@AntonioNoack also Bayern, doing it right now
Antonio Noack I think that’s because of Germany’s fine German engineering of the Porsche
Hey kan, remember when you did the forklift challenge. U said u would maybe make a warehouse with I think scrap man. Will u make a warehouse, or maybe a “ Making a warehouse“ series? I doubt it but I think it would be cool.
YES PLEASE OMG
Would be good idea
do a spud motor, and do more magnet stuff
U once build the Hovertrain, where the wagons were connected by Sensores. Do it whit Magnets !!!
I LOVE ELECTRIC MOTORS!!!!!!!!!!!!!!!!!!!! Please do more motors!
Was I imagining things. Or did I just see the flaps of the thrusters angle inwards as you increased the power output?
That's what it does
Yes, it was a fairly recent change
you're not imagining
7:30 that looked like some sort of clock
make a spud motor just for the sound
abab AAbb p
xX.lover. xX. Night. P? U mean :P?
Electric motor Helicopter, Perhaps.
using the wing mod as propellers, that would be amazing
Well Kan demonstrated in a previous video how there was something wrong using the smaller propellers to create forward thrust. That's why i recommended a helicopter instead since that seems to work better.
@@lavupcreeper8131 Rotors ;D
@@gabrielibarra5551 this was a year ago but yeah thanks xD
@@lavupcreeper8131 👈😉👈
kAN can u make a magnet powered train like the fastest train in china
Seconded for maglev love.
Like Wakanda (black panther film)
Master Channel You guys know they're really just for tourism, right? They're expensive to build, even more expensive to maintain, and impossible to repair. They aren't good for the environment either. Every single one is equipped with lithium ion batteries that are considered precious metal. Oh and they weigh TONS, almost as much as lead. On top of that, the mining process alone is way more dangerous than fracking, and causes environmental damage. If that wasn't bad enough, the power source for maglevs is usually coal or radioactive substances. Not really saving the environment. Oh and they are the world's most dangerous vehicle. Basically the worst vehicle ever. Unless you want to move at outrageous speeds just to arrive an hour early. By the way, don't try to diss me on this, my entire college thesis was on this topic.
Daniel Rubia I don't think Black Panther was the best movie ever, but it's up high on the list for me. The only flaws it had was that vibranium is the explanation for literally everything in the entire movie, and that yuri existed. I freaking hate people like that.
Mike Russo sky scrapers are also pretty heavy
This is so cool. I might try to make something with the magnets. And yes you should make a reversible engine.
monopole magnets
my psuedoscience senses are tingling
I didn't even realize while watching your videos that our scrap machanic has turned into the best engineer software!
Kan:Telling me all about the motors and magnetick stuff
Me:Nani!?
i like how kan is one of the few people that uses mods like theyre official stuff
i mean same but still
also the first thing he thought to make was an engine
i love you, kan
Wow this is really cool!
IceBreakPlays First to comment a comment
True...
1:31 I think this was self-destruction.
The start of vid (intro) KAN: I think I’m going to crash. me: you have already crashed into your engines.
i like how in the first vehicle, the motors act like they have a diferential and that makes the ride pretty smooth amazing creation
You have made and prefer what is a brushless electric motor with the permanent magnet on the shaft.
Do you think it would be possible to recreate a functional magnetic levitation trains like those Japanese ones?
Would likely be very laggy due to the sheer number rapidly switching magnets. In theory though, I would assume it is possible.
This is why I love your channel kAN, you always do the coolest things
God, i just came here after watching all of ScrapMan's multiplayer monday videos and damn, i still gonna have a lot to watch :D
multiplayer Monday: magnet powered cranes challenge!
You could use drive gears to make it work with stock wheels.
awesome, didn't expect this to work so well after seeing scrap man's video
Great description of electro magnetism
Is it possible to make one engine for both two wheels
i would think so, if you have an output shaft on both sides, by using suspension or motors to glitch it to the other side, or welding two motors together so that you have an output shaft on either side or orient the motor longitudinally (drive shaft parallel to the length of the car) and hook it up to a differential mechanism that splits it to both sides
Yes
eggs
If you took a third magnetic motor at 12:20, and hooked it up to a drive shaft leading to the unpowered wheels, you could have a reverse.
And if your worried about being able to turn with these kinds of engines, there are these farm tractors or construction rigs that have a waist. All of their turning comes from bending in the middle, which could be mimicked via two pistons on each side of a hinge, which is located in the middle of the vehicle.
Nice synchronus motor, electromagnets can be used for both the rotor and stator.
That analogy of electric engines with the viper coil and the magnetic field isn’t just an electric car, it’s the magnets system in any automobile, gas or electric
when you said it makes it spin,
You spin me right 'round, baby, right 'round
Like a record, baby, right 'round, 'round, 'round
You spin me right 'round, baby, right 'round
Like a record, baby, right 'round, 'round, 'round
Scrap Mechanic: A good new part.
kAN: Let´s make an engine !
GIANT TREADMILL 🙏 PLEASE imagine driving cars on it
Past kAN: Einstein
Today kAN:
Hi I’m Bill Gates
I have been wanting to do this for 3 years now and finally I can!!!
Thx for making this vid it was super interesting!!!
I love your logic vids!!!
Kan I am really liking how you are actually building stuff in the videos!
The best part in the whole video: 16:00 "The holy cow"
your "L shaped distributor piece" is causing the wobble to the engine. you need to balance the drive shaft. leave the L shape painted black and set sensors to black, fill in the counterweight part of the distributor and paint it white so it wont trigger the sensors but will balance the weight. love the creativity btw
Scrap mechanic legend
I think the magnet has a. double meaning. It's magnet for all types, therefore making it north and south, the regular magnet, which makes it a universal magnet.
Make a giant rc car, I have plenty and I know that with one electric motor you should be able to make it have tonnes of torque if you gear it down onto a driveshaft.
lol when the car flipped from the "motor being too powerful", what actually happened was kan made reaction wheels, where a wheel-like object with a large mass is spun to make a reversed spin on the connected object. usually used in space stations.
Quarantine has got me way back here
If you want to test which engine is faster, then connect then on diferential "ouputs" (semi-axles) and if "input" (cage) rotates, then those engines have different rpm, and direction of "input" also show which one is faster/slower
Add bearing to timig "L" and if you want to go in reverse, "L" pointing right will turn horizontal part around, so it will look like mirrored "L"
Make the bullet train!
Ur videos sometimes is helping me understand things a lot
Make a motor that has a huge diameter. Then it will have more torque and might beat your piston engine!
Off topic, but electric motors, which are in game, use coils of copper, usually 3 or 6, alternating current like u did here, to create a costant torque. This just makes the same motor bigger and stronger, but u build it yourself.
This video may be a year old but still learn some new stuff everyday!! Keep it up Kan
If I took a drink every time he said “oh” I would die of my liver saying no
6:06 its a brushed motor. so a cheap not often used in good rc vehicle motor
You should make levitation creations with magnets
kAN I'm surprised that you didn't already make one but I know you can because you are like the smartest person I know
If you do want to learn more try searching electromagnetic induction, this shows how a motor REALLY works!
Rc stuff doesn't use the outer permanent magnets anymore. They use inner permanent magnets, same with e-bikes, same with e-vehicles. I've got an e-bike with a BLDC that functions VERY similar to your 8-sided electromagnet motor, only difference is mine uses 6 electromagnets.
Alternator's, generators and motors are all pretty much set up the same way in regards to magnets and copper wire. It just how you want it to work. For instance, you can generally take an electric motor and turn it into a generator by spinning the shaft to produce electricity instead of receiving it. Also, the only difference between a generator and alternator is how the internals work and an alternator can ge called a generator in the simplest of terms.
Mechanical is always going to have more torque than mechanical because it is physically moving something. While eletrical or propulsion has to rely on the magnetics field generatad to turn the object and the only way it's going to get more torque is with a larger magnetic field which will make the design bigger.
Hey Kan I Love your videos, keep the great work up!
exactly my first thought: magnets? lets build a motor!
actually, i tried myselft on a stepper motor but did'nt manage to get it to a stable stop
if you don't know what a stepper motor is (i can't imagine that), it is a motor with 2 sets of coils that can be powered it both ways + to - and vica vera. thatway you can rotate it step by step in the direction you want.
irl those often have 200 or more steps per revolution but it would be great to have at least 4 or 8.
New technology unlocked (magnetic motor)
Use the duel magnet set up but switch the second set of magnets for reverse with 2 swicthes
MAKE A PERPETUAL MOTION MACHINE IN SCRAP MECHANIC!
This is so cool plz do more!!
Definitely need a spud gun motor!
Loved the vid deff do what you said but also try some new out of the box things with this mod it opens up so much new potential for the game and creations
Just put another set of magnets in the middle (orthogonal to the other set) and make sure the whole rotor is diagonally symmetrical.
Question? if you only used a single magnetic motor with the 4 set of magnets and link that up with a transaxle drive system you could reduce lag. have multiple gears including reverse and more power (maybe less lag too)?
Now make a flywheel powered gun
Love your videos keep up the good work
you should try to make a maglev train
you can reverse it by putting magnets on the other side of the motor and painting that side
CorporalWill123 or by just using a bearing on the bar
Make with this a Tank!
Now make it run on timers so it’s like having a battery powered car.
Make a railgun with this mod!
0:18 whats up guys im khalen and were back to scrap mechanics
I like how he's like you should really look into this *keeps explaining*
Hint: the more distance to the middle the less max speed but easier to spin.
I think it would be awesome to build some magnetic suspension system or a magnetic railgun
Have a drag race with the magnet mother plz😀
You should apply the high-speed magnet motor to wing-mod propellers, cause I think they spin a LOT faster than engines can spin bearings.. might be janky as hell, but could maybe get you off the ground?
Also this really makes me wish for good, proper, meshing gears in SM..
If you do make a reversible electric motor make the cam tern 180 degrees. It wil be smaller by a mile.
You should make a wheelie bar and make a drag car with it
Hey Kan try hooking up your magnetic motor to your pre-existing power train for your piston powered motor and see which motor is more powerful
MAGNETIC RAILWAYS! (Please)
That first clip is me driving my brushless rc car it goes over 50mph
Can you make a Maglev using static and moving magnets? I think that the fact there's no friction then it would be a very efficient train. It'd be very cool. Also... If you add reducing gearboxes it'd make it more powerful without addingore magnets and lag the game.
hey kan what about using logic to sequence in one direction and then reverses in the other and i think it should be ether per motor or one set to rule them all
You should also make a hybrid car just for fun
You never mentioned it in the video... but is it possible to make a reversible magnet motor?
I’m late, but yes
This is really neat!
you can make crouse control car with an electric motor as you could adjust the timing ofthe magnets
you like a elon musk creating electric stuff
have you tried making the motors themselves the wheels? they look round enough
I think the electric motor works better with small wheels.
i Think you chould make a reversable magnetic Engine,tip use 4 rowsof magnets,2 of the rows are forward,2 of the rows are backwards.
+kAN Next video idea: Wings mod + magnet motor = real flying plane!