Yep, great motors. Started using these back around 2007 when racing boats. The relationship Castle has with Neu is how these green motors got started. Although the Neu motors are Beastly too, they aren't marketed to the RC Car Speed Run folks. (seems like the high RPM limit is what the market craves) I'm assuming this is why the request made for this comparison video was to compare the motors in the video rather than the high end motors.
@RCexplained I see. I didn't know someone requested a comparison. I like the 1721, but it doesn't have the braking power that TP or Neu has, In cars anyway. Not sure about boats.
I just made a video about a new TP motor that actually was defective so I’m going to share it! The return policy is VERY STRICT and is only a 7 day window! So take this video wisely👉 ua-cam.com/video/cheU-HHe16c/v-deo.html
Would you happen to know why the Castle ESCs can't seem to handle the sensor board in these TP motors? None of my Castle ESCs can detect the sensors in my TP5660 motor, sadly.
Awesome video and thanks for doing it. It would be good to see some sort of a performance test comparison between these two motors to get an idea of how they will perform in the real world. Keep up the great work👍
Great video bro, i was just wondering if I could use a brushed servo in my ARRMA granite v3 3s?? I think that i saw a guy use a brushed servo on his ARRMA granite v3 3s. But ir doesn't hurt to get a 2nd opinion.
@@RCexplained it would be cool to compare these tppower and castle motors to the coreless lehner motors, i want to understand how the Lehner coreless motors can develop the same tork without an iron core that amplifies a lot the magnetic induction in the windings,
@@ralphreiter4228 I can tell you this, lehner motors are packed in very tight. Rotors are larger diameter for the can size. Also alot of winding strands. They are very heavy motors for their size.
You compared the same spec motors. But you didn't compare motors that have the same size can. As the tp one of the same size is more powerful. Also the fact that they drill to balance the rotors is more accurate than just adding some epoxy. Which epoxy has a chance to fall off especially from expansion and contraction of the metal due to heat. Not to mention on a basher with lots of crashing or jumping.
Thanks for sharing Sir👍
Really interesting, thanks
Glad you enjoyed it
Great video. You think those are good motors , you should check out a Steve Neu 1527 or 1530 motor. WAY more efficient... and expensive lol.
Yep, great motors. Started using these back around 2007 when racing boats. The relationship Castle has with Neu is how these green motors got started.
Although the Neu motors are Beastly too, they aren't marketed to the RC Car Speed Run folks. (seems like the high RPM limit is what the market craves) I'm assuming this is why the request made for this comparison video was to compare the motors in the video rather than the high end motors.
@RCexplained I see. I didn't know someone requested a comparison. I like the 1721, but it doesn't have the braking power that TP or Neu has, In cars anyway. Not sure about boats.
I hear Cordova brushless motors are the most powerful rc motors in the world
@@acourtneylawson2065 Based on what?
@@acourtneylawson2065 I would say lmt lehner for the absolute highest wattage. Cordova are very very nice.
A very interesting video ; thanks :-)
Thanks for showing the inside! I thought my rotor was split in half with that line in the middle of the rotor
Glad the video was helpful.
Maybe you should watch this video! ua-cam.com/video/cheU-HHe16c/v-deo.html
I just made a video about a new TP motor that actually was defective so I’m going to share it! The return policy is VERY STRICT and is only a 7 day window! So take this video wisely👉 ua-cam.com/video/cheU-HHe16c/v-deo.html
Would you happen to know why the Castle ESCs can't seem to handle the sensor board in these TP motors? None of my Castle ESCs can detect the sensors in my TP5660 motor, sadly.
Castle's still the king baby!
They're so long, must have bucket loads of torque
They have a decent bit of torque for sure.
Very cool
You need to talk about the smaller shaft and rear bearing on the castle. It’s a problem
They need to go big.
Awesome video and thanks for doing it.
It would be good to see some sort of a performance test comparison between these two motors to get an idea of how they will perform in the real world.
Keep up the great work👍
Thanks for the comment! Would also love to see a performance comparison.
Do u know the size of the 1721 bearings?
Great video bro, i was just wondering if I could use a brushed servo in my ARRMA granite v3 3s?? I think that i saw a guy use a brushed servo on his ARRMA granite v3 3s. But ir doesn't hurt to get a 2nd opinion.
I used a brushed servo for steering in all of my RC's.
Where can i get one
Castle site
lehner motors are quite good aswell, the 30100 can go up to 40kW
Great Motors too. Very unique sound to them, at least in RC Boats.
@@RCexplained it would be cool to compare these tppower and castle motors to the coreless lehner motors, i want to understand how the Lehner coreless motors can develop the same tork without an iron core that amplifies a lot the magnetic induction in the windings,
Lehner motors are very expensive!!and mines lasted 3 weeks and they didn’t even honor the warranty that supposed to be 2 yrs
I've never tested another motor as smooth as the Lehner motors. The kv doesn't jump around at all.
@@ralphreiter4228 I can tell you this, lehner motors are packed in very tight. Rotors are larger diameter for the can size. Also alot of winding strands. They are very heavy motors for their size.
You compared the same spec motors. But you didn't compare motors that have the same size can. As the tp one of the same size is more powerful. Also the fact that they drill to balance the rotors is more accurate than just adding some epoxy. Which epoxy has a chance to fall off especially from expansion and contraction of the metal due to heat. Not to mention on a basher with lots of crashing or jumping.
Funny you mention that… you’ll be surprised to see what’s in this video!…. ua-cam.com/video/cheU-HHe16c/v-deo.html
leopard are the best! shaft in steel! tp no good! shaft in recycle alloy box coca cola molten! broke two shaft! tp very hot in use!
Wow…. If you feel that way about TP then your going to want to see this video!….👉 ua-cam.com/video/cheU-HHe16c/v-deo.html