I had the same issue but found the problem. You are connecting the harness for the Can Bus (Fiber box) in wrong place and as well the adapter cable that you plugged into the red plug behind the heater control. That should not be plugged there. you need to remove the glove box and on the left side you will find the MMI box. You unplug the red plug from there and put the cable in between there and the fiber box as well. Then all will turn on and work :)
Thank you very much...I installed this system on my car 2013 q7, but unfortunately the sound did not work and I was very tired in this matter. Can you help me? Thanks again❤
The problem is quite easy to solve. I think its because your MMI doesn't have Aux enabled. You have to activate this via the engineering menu (Green Menu). To open the Green Menu, hold down the Setup & Car buttons (press Setup first) until the menu opens. If this does not work, the Green Menu must first be activated via OBD (OBDEleven or VCDS). If the Green Menu is open, you must click on Diagnostics, then on settings and change the AMI/Aux setting there. From "No Aux" to "Aux". I mean it is selection point 1, so Aux, Ami & BT are switched on. Then exit the menu again. Now click on Media as normal and select Aux. Now you should have sound. I have already installed several Android radios in VAG cars and when there was no sound it was always this error.
@@ErcNoke Saludos amigo, tengo el mismo problema mi dispositivo no tiene la caja de fibra óptica, aun creo que por esta razón el BT no funciona no se escucha nada.
Hello, I have a 2013 Q7. After installation the screen doesnt show anythink. The backlight is on but you cant see somethink on the display. But radio works, i can hear music. Do you have an Idea
I have fitted the same screen all mine works fine apart from the climate control, for some reason I can't get it work at all, has anyone else has this issue? If so how did you fix it?
I had the same issue but found the problem. You are connecting the harness for the Can Bus (Fiber box) in wrong place and as well the adapter cable that you plugged into the red plug behind the heater control. That should not be plugged there. you need to remove the glove box and on the left side you will find the MMI box. You unplug the red plug from there and put the cable in between there and the fiber box as well. Then all will turn on and work :)
Thanks! It work on my Audi, but no sound
You have to component protection
Did you fix the problem with installing the radio
thats what i kinda figured upon watching him connect everything up together.
I cant find the mmi module in the glovebox, any ideas?
I have problem with activation aux on android HELP menu green is active and on source
hello friend did the 2 din radio work?
Whats the problem. I have the same problem. Monitor dont work, radio work
Thank you very much...I installed this system on my car 2013 q7, but unfortunately the sound did not work and I was very tired in this matter. Can you help me? Thanks again❤
The problem is quite easy to solve. I think its because your MMI doesn't have Aux enabled.
You have to activate this via the engineering menu (Green Menu).
To open the Green Menu, hold down the Setup & Car buttons (press Setup first) until the menu opens.
If this does not work, the Green Menu must first be activated via OBD (OBDEleven or VCDS).
If the Green Menu is open, you must click on Diagnostics, then on settings and change the AMI/Aux setting there.
From "No Aux" to "Aux". I mean it is selection point 1, so Aux, Ami & BT are switched on.
Then exit the menu again.
Now click on Media as normal and select Aux.
Now you should have sound.
I have already installed several Android radios in VAG cars and when there was no sound it was always this error.
@@ErcNoke Saludos amigo, tengo el mismo problema mi dispositivo no tiene la caja de fibra óptica, aun creo que por esta razón el BT no funciona no se escucha nada.
Dónde se puede comprar esta pantalla?
What about the control head wiring? Without that you’ll never get it to work
I have the same thing as you connected everything and it doesn’t work if you succeed please tell me how you did it
I have the same problem . Tell me how you did it
2 разъем нужно вставлять не в климат, а в блок за бардачком. Вы сделали неправильно, поэтому у вас он и не заработал.
Hello, I have a 2013 Q7. After installation the screen doesnt show anythink. The backlight is on but you cant see somethink on the display. But radio works, i can hear music. Do you have an Idea
I have fitted the same screen all mine works fine apart from the climate control, for some reason I can't get it work at all, has anyone else has this issue? If so how did you fix it?
Red wire 12v acc
I have same problem what ist problem ?
Red wire 12v acc
To accessories