If you guys are looking to buy the fancy FlangeLock caps, FortisHD has them and if you buy it from them it supports our channel :) Link here -> tinyurl.com/yc6chnt7
OMG! I lost it when Tylor pull started his 1" impact! That's some of the funniest $hit I ever seen! Him and Cam should be on stage! Great vid guys!!! Thanks again.
These videos really make a fella appreciate how important a blue collar job is and how everyone has a job and it matters. Thank you for the great content and people!
tylor ain't lying about the tracks. Just did a full undercarriage on a D6, though I actually followed CAT specs on torques. Master is 370ft/lbs + 180 degrees, grousers 370 ft/lbs + 120 degrees. Cheated and used the 1in to get the degrees.
You guys are awesome. Cam, Tylor, and all the crew! Just bought a couple supporter sticker packs to help out the channel. Love the content and the humor. You guys crack me up . I'm not even a mechanic, I'm a stonemason but this channel is my absolute favorite entertainment these days.. " because we care about the environment"" hahaha
Thanks so much Shawn. We really appreciate you supporting us with the comments and buying some sticker packs. It'll be packed and shipped your way soon!
28:02 I do tracks everyday. I'm in a good mood everyday. Love my life. 🙄. I'm in my mid thirties out working kids out of high school. Tracks sure make you a humble person 😂😂😂
i still love watching you guys! It reminds me off me and my buddy at work were like brothers all most and mess around with each other while we get the job done. I freaking love this
That was definitely a on the field way of splitting the machine 😅 very intriguing! Cat Man here myself & have just finished replacing the swing gear on a 538 couple weeks ago 🤘 used a hiab crane to split the machine..
Just something for Taylor, when you need to prep your new pads for install use the oxy torch to burn the paint off the underside of the pad. Will remove all paint and if you have all your new pads in a line you can do an entire link set in 10 minutes that includes the paint under the bolt head.
Dont forget to pull start your impacts, you dont get enough torque out of em if you dont. If you make long enough hoses, you can actually walk the track frames out under their own power
Really enjoy the knowledge I can take from the vid without being too detailed! Also was wondering do your customers care or know that they pay for the job but it takes a bit longer just with filming and all that? Or is that already in the price?
Awesome Video. That was pretty awesome splitting the excavator. The fabrication work was impressive as well. Keep up the awesome Videos. Surprised they don’t make you wear a hard hat under the excavator, in case it falls.
Hi guys great stuff. Must be fun working with you . I love watching your videos good content. I have concrete mixers in north wales Anglesey uk & could do with your knowledge keep safe Les north wales 🏴 uk
Welders on tekamo now? Maybe i should get on once i get my rig built out more :) also poor man having to run hardwire on that kinda stuff, granted hes fabing not welding but still. Currently replacing the bottom of a gravel skiff, and if i was stuck running hardwire, even .045 insteod of my normal 1/16th dual shield it would probably take double if not more time to get that cocksucker glued on.
That house bearing isn't that bad the old 690ELC I used to run it would crunch and bang, it would lock up so I'd have to swing and take a run at it LOL. Good to see Cam has his own worksite now, a lot easier working on shit at a homebase than out in the field. Tylor picked Cam up like he is Tylors little b*tch 🤣Its worth it putting money into an older pre-emissions machine. Daequip seems to build better attachments, Accurate is ehh not great, Comes with Sh*t aka CWS forget about it.
If you guys are looking to buy the fancy FlangeLock caps, FortisHD has them and if you buy it from them it supports our channel :) Link here -> tinyurl.com/yc6chnt7
OMG! I lost it when Tylor pull started his 1" impact! That's some of the funniest $hit I ever seen! Him and Cam should be on stage! Great vid guys!!! Thanks again.
Yeah that was jokes. Thanks Dean 👌
Definitely the best part😂
Another banger video with the guys. And I’m excited that Tylor is in another vid 😁
We appreciate you Tim 👌
@@TekamoHD and i appreciate you guys for making awesome content 😎
aw shucks thanks for supporting us boss
@@TekamoHDyou’re welcome guys 👍🏼👍🏼
I was already enjoying the technical content of the video, but the bit at 22:04 was very heart-warming.
Daycare pickup 👌
Fancy seeing you here Clive, let alone another Scotsmen 😅
The fabricator portion was very cool with Kyle, thanks for taking us along! Great work guys
Thanks man, tons more fabrication in future episodes!
Kinda funny that I spend my day operating those thing and spend the night watching people fixing them
I think all operators are secretly envious of mechanics. Thats why they break shit so much they like having us come out to watch us work lmao
Another nice one boys!
"Do I wanna live?" 😂😂
I burst out laughing when he said that lol 😂
😂😂😂
These videos really make a fella appreciate how important a blue collar job is and how everyone has a job and it matters. Thank you for the great content and people!
We appreciate it man!
Pull starting that 1" was just gold 😂😂it's that specific brand of Canadian humor that makes me proud to call yall my neighbors to the north! 😂😂😂😂
tylor ain't lying about the tracks. Just did a full undercarriage on a D6, though I actually followed CAT specs on torques. Master is 370ft/lbs + 180 degrees, grousers 370 ft/lbs + 120 degrees. Cheated and used the 1in to get the degrees.
Really? Thats Fawkin TIGHT. The 583K I did recently was like 220 plus 120 I think. And that was T eye T tight. Lol
I did a 315 CL and decided theres about 100 things id rather do and that wasnt a real big machine lmao
The knowledge gained by watching these videos is pretty impressive
Glad to hear man thank you boss
You guys are awesome.
Cam, Tylor, and all the crew! Just bought a couple supporter sticker packs to help out the channel. Love the content and the humor. You guys crack me up . I'm not even a mechanic, I'm a stonemason but this channel is my absolute favorite entertainment these days.. " because we care about the environment"" hahaha
Thanks so much Shawn. We really appreciate you supporting us with the comments and buying some sticker packs. It'll be packed and shipped your way soon!
Finally, I got my set of 4 way angle wrenches from snap on after hearing these guys talk about them nonstop! My snap on guy gave me one hell of a deal
Nothin like a Sunday night watchibg a tekamo vid. Love seeing Tylor more. Keep up the great content guys!
Thanks man!!
Man I work at a heavy equipment salvage yard in Anderson,Indiana taking machines apart. Love watching your videos. I told me boss we need a big chooch
The big chooch is definitely really nice lol never been to an equipment salvage yard yet, sounds like a fun place
28:02 I do tracks everyday. I'm in a good mood everyday. Love my life. 🙄. I'm in my mid thirties out working kids out of high school. Tracks sure make you a humble person 😂😂😂
The new guy fits right in lol
Yeah hahaha
Getting the gang together and getting ‘er done! Watching from Ontario Canada 🎉
been watching the channel for a while now great to see cam doing good for him self with blutech
i still love watching you guys! It reminds me off me and my buddy at work were like brothers all most and mess around with each other while we get the job done. I freaking love this
Tylor for president!
That was definitely a on the field way of splitting the machine 😅 very intriguing!
Cat Man here myself & have just finished replacing the swing gear on a 538 couple weeks ago 🤘 used a hiab crane to split the machine..
Just something for Taylor, when you need to prep your new pads for install use the oxy torch to burn the paint off the underside of the pad. Will remove all paint and if you have all your new pads in a line you can do an entire link set in 10 minutes that includes the paint under the bolt head.
Tylor with his gas powered air gun was hilarious, especially when he was tweaking the carb 🤣🤣🤣
Love the content you guys keep putting out, nothing better then getting off from a long day and watching one of u guys videos
Glad you enjoy them 👌
Excited for more tylor content
Love your content guys, you'd think after wrenching all day the last thing you want to watch is someone else doing it, but you'd be wrong lol.
Dont forget to pull start your impacts, you dont get enough torque out of em if you dont. If you make long enough hoses, you can actually walk the track frames out under their own power
Makes me smile when the new video comes out
We appreciate it man
awesome shop you guys keep pumping out the awesome content!
Lots more episodes coming out thanks for supporting us 👌
Really enjoy the knowledge I can take from the vid without being too detailed! Also was wondering do your customers care or know that they pay for the job but it takes a bit longer just with filming and all that? Or is that already in the price?
I’ve done this so many times only we have tall jackstacks that we made that make this so much easier
Great video yet again. Keep up the amazing content fellas
Thank you very much 🫡
This is awesome! What a channel!
Thanks boss 👌
Awesome video as usual guys!!!
Thank you Terry we love ya
@@TekamoHD .One of my favorite UA-cam channels!
Ya'll need to come to South Carolina ...
You guys do great work!
thank you Tom!
Recently did a rotation bearing swap on a Cat 330 with a long boom. Crazy amount of work but cool job.
Best channel on the UA-cam’s
Thanks bro!!
Awesome Video. That was pretty awesome splitting the excavator. The fabrication work was impressive as well. Keep up the awesome Videos. Surprised they don’t make you wear a hard hat under the excavator, in case it falls.
Love the new shop! 🔥🔥
Yeah it’s slick right?!
Love this freaking channel.
Hell yeah!!
I worked at a power plant for 10 years and those hy torques are bad ass we owned our own for high pressure boilers
Field daddy or shop daddy. We love you the same
More Tylor woooooooo
Hell yeah! Love the content! What kind of sunglasses does Tylor wear?
Oakley Batwolfs
22:03 is best moment
Another great Video 👍👍
Thank you sir!!
Tekamo HD
77.3K subscribers
Subscribed
Those magnetic flange lock things look pretty cool. Way better than the silicone plugs that fall out when you look at them funny.
The most impressive thing was Tyler drinking that Red Bull
What kind of pullers do you guys use to pull harmonic balancers with if you don't mind me asking
Does Carson still work with Cam? Their back and forth is pretty hilarious.
26:50 and forward it’s the best part lol
im only 20 years old and i did one of those for my uncle last year
I do the same thing with the leaf blower, 5 min of shooting it at myself like a 5 year old before I actually get back to work!
🤣
Hi guys great stuff. Must be fun working with you . I love watching your videos good content. I have concrete mixers in north wales Anglesey uk & could do with your knowledge keep safe Les north wales 🏴 uk
You boys got a TV series on your hands
Thanks boss that’s very kind
They already have. UA-cam is the new TV, and the channels content is very good.
@@TekamoHD Definitely not a boss, doing my Foundations course in Kelowna, BC as we speak. :)
You gotta love this channel :)
Thanks boss 🙏
What boots is Cam wearing?
Red Wing 2414’s
you guys should offer the coveralls on your site!
awesome!!
Thank you boss
So when you guys signing a deal with the Discovery Channel? Love this shit
Uncle Smegma I love you
Let’s go !!
👌👌👌
Ain’t never been this early
Hell yeah brother
I clicked the video so damn fast haha
What's up techs!!
Why u gotta take the sun gear out to move the tracks. Does it lock it in place? Sweet video btw
Langley BC Canada 🇨🇦
Good evening fellas!
Yo what’s good Brett how you been??
@@TekamoHD real good! Been busy! How about you? Staying warm up in BC?
Awesome man. Ya man mostly rain but no complaints
We need a truck tour from Brandon black truck.
Anyone know what brand coveralls the guys wear? Had many of pair that weren't as good as theirs look
tyler made me hit that sub button this mf is so fucking funny
RIP grease line lol
Welders on tekamo now? Maybe i should get on once i get my rig built out more :) also poor man having to run hardwire on that kinda stuff, granted hes fabing not welding but still. Currently replacing the bottom of a gravel skiff, and if i was stuck running hardwire, even .045 insteod of my normal 1/16th dual shield it would probably take double if not more time to get that cocksucker glued on.
How does someone like my self get into this line of work
4K VIDEO NICE
NICE!
Good thing milwaukee tools can handle liquids.
Ordered stickers for my job box almost three weeks ago still nothing
Hey John, can you please email parts@fortishd.com with your order number and they’ll look into it right away!
@@TekamoHD shouldn’t have to, but sure
Fun and games. 😂 And a bunch of nutters. 😜👍
What's the deets on carson, did he make it or is he bye-bye?
Why does tekamo allow contractors from certain US states an not allow others? Genuine question, my state is eligible for contract work three you guys
Have you contacted them about this? They've spoken to anyone who emailed them about possible collaborations.
@@pehlavoon no, I guess I do don’t think about that. I’ve just always done it through the website
WINGA DINGA INTENSIFIES
I can see easily on camera. it’s enough for me
Bad ass
thanks ken
Where are the big ass jacks stands?
Where’s Carson is he still around?
What’s going on with Carson
Where’s Carson…? 🥺
Is that apprentice Carson (now technician Carson) or a different guy?
Fkn sick
Ya'll have enough tools on the website to need a better system to look through them.
Do not put red loctite on track pad bolts.
How much extra ? Lol
22:33 Bart Simpson's butt
Sup
Whattup boss
That house bearing isn't that bad the old 690ELC I used to run it would crunch and bang, it would lock up so I'd have to swing and take a run at it LOL. Good to see Cam has his own worksite now, a lot easier working on shit at a homebase than out in the field. Tylor picked Cam up like he is Tylors little b*tch 🤣Its worth it putting money into an older pre-emissions machine. Daequip seems to build better attachments, Accurate is ehh not great, Comes with Sh*t aka CWS forget about it.
I thought he was gonna say American crane was the best place to get AMPs, more like worst place
Just my .02, why would anyone buy stickers? To me if you want to advertise you give out free stickers, not sell them. Am I missing something?
Click
🤭 Promo SM