Hi the jst or balance plug is only needed when separate battery feed to sound system I think ? So if connecting system through main battery for plane I shouldn’t need the jst or balance plug is this correct ?
I've added another TT-25 transducer to enhance the sounds, but it's not operating right, the system repeatedly make's a thud and popping sound when the volume is turned up, the speakers are spaced apart enough. When I remove one of the transducers it works fine, I'm sure the installation is correct, any suggestions?
When you cut the JST, what did you add to the wire ends? Did you have to solder something. This set up is just what I need but want to make sure before I cut the JST. Hope you can help me. Thanks.
Thanks much. I really like this idea as opposed t using a separate battery. Do I need anything else other than the balanced plug? I see I can get the balance plugs from your web site. I cannot find here in the US. Ate the plugs available here (USA)? thanks for your help.
+Stanley Clowes Make sure the sound chip is installed correctly. I had the same issue when I replaced new sound chip in wrong direction. To check, remove with needle nose carefully straight out, without wiggling back and forth to not bend pins and switch chip direction, reinsert chip and test. If that doesn't work, I would suggest contacting the vendor/person you purchased.
well done and good to see some home grow help
Hi the jst or balance plug is only needed when separate battery feed to sound system I think ? So if connecting system through main battery for plane I shouldn’t need the jst or balance plug is this correct ?
I've added another TT-25 transducer to enhance the sounds, but it's not operating right, the system repeatedly make's a thud and popping sound when the volume is turned up, the speakers are spaced apart enough. When I remove one of the transducers it works fine, I'm sure the installation is correct, any suggestions?
When you cut the JST, what did you add to the wire ends? Did you have to solder something. This set up is just what I need but want to make sure before I cut the JST. Hope you can help me. Thanks.
Thanks much. I really like this idea as opposed t using a separate battery. Do I need anything else other than the balanced plug? I see I can get the balance plugs from your web site. I cannot find here in the US. Ate the plugs available here (USA)? thanks for your help.
How do I setup this using 2 battery packs and 2 ESC/BEC's?
How do I connect it with a fuel engine?
when I plug the card in it makes a pop then a green and red light comes on and mother just beeps
+Stanley Clowes Make sure the sound chip is installed correctly. I had the same issue when I replaced new sound chip in wrong direction. To check, remove with needle nose carefully straight out, without wiggling back and forth to not bend pins and switch chip direction, reinsert chip and test. If that doesn't work, I would suggest contacting the vendor/person you purchased.
WTF... keep the camera still!!!!!