Magnetic Motor (Flux 2.0)
Вставка
- Опубліковано 29 сер 2024
- sticky point
music by www.hartwigmedia.de
perendev
free energy
magnetic motor
free energy generator
freie energie
Magnet Motor
muammar yildiz
mike brady
george soukup
hartwigmedia.de - Наука та технологія
............bonjou...........
Je dirais parfait..... vous rajoutez une inclinaison dès aimant magnétique de 30 degrés en plus de vôtre réglable qui est parfait... faites l'eût lol
BRAVO.... vraiment bravo
Respect for your effort to prove magnet motor free energy is impossible to be build
Here's something to think about, get two disc shaped magnets with center holes, mount them on a non magnetic shaft.(not too close)
Make them opposing, and you should get a single pole all around the edge as the fields are forced outward.
Now place your "wheels" on a flat surface get a rod magnet, and try to push the rod magnet between the two discs.
The wheels will roll away.
Unfortunately, if you mount the "wheels" in bearings, so they can't roll away, nothing happens.
I believe the answer lies in being able to block a magnetic field, something we can't currently do :(
Am sure a working magnet motor is possible,where theres a will theres a way.
respect bro for all your hard work and more respect for sharing it.
those how ideas develop
great experimenting... don't ever get descouraged! I'm watching
One comment. All oscillators are unstable. That is why they oscillate. If you want to create a magnetic oscillator, it needs to start-up by itself instead of you pushing it. If it does not start by itself it means it is not unstable, but stable. Even if you push it and it oscillates a bit, that was just a forced input into the system, and the system will tend to the stable point again. So in your endeavour you need to find a motor that starts by itself, and amplifies the oscillations by itself.
If you wanna solve the rotation pulling back, add a forward spring to keep it from reversing, no magnets just mechanic force.
One of the best projects Ive seen on youtube! I wish you good luck! Vielen Gluck! Sehr interresant projekt!!
advise dont stop seeking you will find what you seek.
If you can see that when it starts to enter the arrangement there is an opposing force so even the it thrust forward when it leaves due to that repelling but still when it enters to the other arrangement it will be repelled back with the same force to the force that made it thurst forward so at some point it will balance
If we ever get around that stupid cog probleem, we might get it work, but looking at this as of now, this get’s sooo encouraging to watch.
Perfect!! Keep working your project!! John from Greece
............bonjour..............
Je confirme sa fonctionne très bien....
Inconvénient le battement dès champ magnétique à répétition
Détruit l'aimantation de blocs aimant céramique ou autre.... il à mille fois mieux.... la vraiment sa dure plusieurs 10 zaines année.. bon courage. Lol
utilise du mumétal , pour créer un déséquilibre magnétique ( dévie le flux ) ( comme un bouclier qui empêche l'attraction mais laisse la répulsion ! bonne continuation , Néo ; )
How did you set up the axle that it's all spinning on? What components did you use for this part and did you have to weld anything together in this case?
Excellent experiment for those who want to understand that the Perendev
engine is a missed project.
You need to set the timing properly throughout the north and south phase of the magnetic flux to maintain constant motion
Great work. Its possible to make spin indefinitelly. In my opinion, you need to add a few more layers and the net force of them all, will overcome the "sticky point"
Nice work I am working on one right now and this has given me a believe that I will get mine working some day
great helpful tips..... thanks for shearing... new knowledge....
Try electrifying the magnets with a battery. Connect an alternator and run that to the battery, then run a 12 volt contoller, use 50% of the power to run the electric motor, and the other 50% to a battery bank or just use the constant available power.
Most alternators require quite a bit of force to keep producing power at high load though so i would suggest controlling the power you have available at that point to keep a charge in a battery bank.
ONLY MACHINE I'M SAD CAN'T BE PERPETUAL, lot of work, amazing job man, really well done wow
I think not can be perpetual...but it need work: stronger magnets made using electrodes, and possibly if different metals...also the angle of magnets need augmenting...
But if he use antenna pulses (use flux) hed need energy but get larger returns back...and if
Спасибо за сэкономленное время👍
I have watched lots of these videos from many different people. It seems to me that a electro magnet driven by a small rechargeable battery, turning on & off with appropriate timing might be the answer. The mechanical rotation of the wheel could recharge the battery, similar to a car alternator while producing enough extra energy to drive a generator. The timing of the electro magnet would have to change as the wheel increases in speed. I am no scientist, just a thought
hmmmm.... perhaps incorporating a series of magnets that flip to the other side using a cam system, or using electromagnets, again with some sort of cam that turns them on or off, and all the power needed to activate them could be made from the wheel itself, just treat it like a large generator. keep at it man, i would like to see where this goes!
Me parace que tiene que estar un poco mas alejado un extremo del bloque de imanes de afuera. Para que de una direccion. O intercalar entre el primer iman un pedazo de acero dulce para obligar a que los imanes de adentro pasen por ese lugar. Del grosor de la chapa dependera la atraccion. Esto es solo para el punto critico de entrada.
Have you ever done it? What was the result?
I like the way you build our rotors
My friend, try to look in a diferent way, dont turn a disc turn a sphere
Have admired you experiments over the years but when the energy is final used in the fly wheel the magnetic breaking effect kicks in and it must stop. Have you considered fixing the flywheel and magnets vertically, attaching two pendulums to oscillate back and forth and using a slower action to move a ratchet clock type mechanism to a drive shaft. Much slower I admit but you need a an additional force to kick past the dead spot. I'm not sure that's going to be it either. Keep going if anyone deserves to crack this it's you.
Energie ist nur Umwandelbar, Mageneten werden ebenso mit Energie geladen doch geben diese an ihre Umgebung ab, du verlierst Energie an der Achse. Bring die Konstruktion mit gegen-poligen Magneten zum "schweben", dann ist der Widerstand gleich dem Gewicht deiner Platte mit den Magneten. Die Energie wird den noch nicht 1 = 1 sein, es wird immer etwas an die Umgebung abgegeben. Der Ansatz ist ok, doch nicht weit genug gedacht. Viel Erfolg beim basteln.
ich hätte eine frage bezügliche deines projektes. hast du es am schluss zum laufen gebracht ??
You are on the right path but think of the large push and stagger it three high - duplicate it three high and have each part just off slightly and it will work!!!!!!
Ask your self how to overcome static and perpetuate a wave ? Fluid like the ocean or space that is the 3D effect that allowing the flux to propagate till it crashes on a shore and is still recompiled back into the fluid without loss .
i thought so much about this...before and after this clips... aint there a possibility to catch that bits of energy while the disc finished spinning and repeats spinning back to use that as starter for the missing move ? wouldnt an arry of more circles make a better job a.w.? i would like to have the time and res. for that ... go on ...so cool
So much for your desire for free energy; Unfortunately it won't work unless you can switch the polarity on every magnet simultaneously ~ and you can't do that with permanent magnets for both the stator or the rotor. Either the stator or the rotor has to be able to reverse polarity with every pole shift.
Wer aufgibt hat verloren!
Weiter so!!
Поражён твоему терпению, ты упустил один момент, на твоих видео есть ответ, ты просто сам его не заметил
I actually thought it was going to make it there for a minute!!
It would work better if you use gravity force as oposite to generate a motion
Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs related to angular energy continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will walk with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet.
I have a few ideas I'd like to try. If I did manage to get it to work. I'd put it out there for everyone to see. And show how it works. Free for all!
At least you tried. And i do hope that you're getting closer and closer to achieve it. I honestly don't think that free energy exists. I think we can significantly improve its efficiency by using a much bigger energy source (like the sun or gravity), but not completely free. Well, we'll never know until we try everything aren't we? Maybe someday we can find and exploit a loophole. And what you're doing is extremely crucial to our technological advancement by speeding up discoveries.
Btw, have you try using gravity to assist in some part of your system and maybe using the rotation itself to cut on and off the magnetic shielding?
Great work. Recently I found the work of Howard Johnson magnetic gate very interesting. There is an episode about him. EFV04 magnetic exchange forces. Maybe it can help you on your way. He mentioned 60 degree is important. As the base form of a snowflake.
Can you try to add static magnets on top or under the wheel for canceling fields.
The stationary magnets should be lined with angle not perpendicular to moving ones
Awesome keep them coming. So close.
intre stator si rotor trbuie sa fie o difrerenta de numar de poli ,si in plus orentarea trebuie sa fie tangentiala sa rezulte un moment de inconvoiere. sa inpinga lateral ,iar intre poli sa existe o izolare a campului magnetic ,!
Try to shield electromagnetic camp with alluminium
du kannst das problem ganz einfach beheben das es nicht stehen bleibt in dem du keine scheibe sondern eine kette oder band verwendest in elyptischer form wie bei einer fahradkette die kettenglider austauschen
Excelente investigación, sigue asi
MAGNETIC FIELD EQUILIBRIUM is what magnetic researchers need to think about first ... Large or small magnets no mater how strong they are like the magnetic field of the Earth that will always find it's way to its Equilibrium...
Vivement la prochaine video fini le on veux voir. Please finis your project all want see
переменный ток, возможно получить от колебания а не от вращения?
Теперь все знают почему нельзя выиграть в рулетку крупную ставку.
Now if there was just some way to like make an alternating magnetic current, like maybe with wire wrapped into coils, with maybe electricity to power it?
What if you geared up the "stators" so that on each of the 4 stators the distance of the front part is decreased and the back part coming out of the rotation is increased like a wave? because your magnets pull in opposite directions. What if u used angular rotation or mu metals? Ill never know... >XD
build a giant wind up clock mechanism with some true torque an power and go about getting it wound up for as little imput possible with some magnets doing the work...magnets alone are crap as the motor...use them as the side energy ie that gives a unbalanced wheel the extra tiny nudge it needs to keep it spinning
hy bro, try using the external magnetic boosters with the design of the Buddhist swastika.
It creates the perfect spin... good luck!
Nice vids, good formwork, though thing is, permanent magnets are not permanent ;(
You are just trying to do so that the magnets don't interact to induce drag any more. What is the point of doing so?
just need to make a variable distance between the rotor and stator magnets :))
Ya, modified version of stepper motor.
Oval?
Muito bom ... em minha opinião está no caminho certo ... porque não experimenta elipse ?
Jose Martins olá amigo estou com um projeto e montei um canal para ouvir algumas ideias. Não tenho muita experiência na área, mas se possível dá uma olhada no canal. Estou com muitas dúvidas. Valeu!
Молодец ,красавчик ,лайк за труды ,подписка за кочественное видео.
your magnetic field is not stable i think you need to put some amps into the magnets once you have it started... and for those whining like a woman about theres no such thing as free energy... your right there isn't but a person's effort is the energy being put in. good job keep it up.
great theory is the coefficient greater than 1 ? No look at tawir(sp) design it is 1.1- 3.0 I see about 100$ USD builds a nice product that is FREE POWER (india?) like liquid fluorine thorium reactors CE 1.5 + is the public allowed free energy NO! can they stop TEK NO! build them all that is required now is grease bearings, ect. IMHO aluminum steel neo magnets are it oil is for ? at some point bearings will be magnetic tolerance(super conductivity)small inexpensive generator, build them now!
What about series of iron cores on the outside with a timed magnetic pulse maybe from Hall effect as switching. What does it matter if a solar panel and a capacitor gave it a kick at just the right time.
Could the effects of copper have an increased effect applying Lenz's law? Put thick copper strip between the two circles.
you have created the magnetic brake, improve the stopping and you are rich :)
At the end ur using steel vices that will affect the flux lines also ur measurements need to be more precise each magnet has a slightly different tesla strength. None are exactly the same. So many variables like friction and even earths magnetic field. ...u have more chances of winning the lottery draw
I think that this motor needs a commutator likes that in continuous corrent to reverse polarity.
if the magnetic rail in your first video works, why no attempt to make a kind of drum, with the magnetic rail rolled over??
be careful - BB is watching YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
I admire ur determination.. Gudluck
what or who is BB?
@@kittaphat6440 Brother Banana
sera que usando a proporção aurea se chegaria a um resultado melhor?
Waiting to see Flux 2.2
You can put all the magnets you want in the positions you want, this will never create energy is pure physical
Hi.. would you build me the wood material? I’ll purchase them.
Ola amigo, vc teria um video com mais demostração em fucionamento?
Did you try 3 or 5 stator magnet sets with your for magnet sets on the rotor ?
0.90 to 2.00
this is talking everything ;-)
tenes que usar "mu" metal. se emcuentra en los discos hdd de pc`s..es el metal que esta pegado al iman de neodimio..asi lograr disminuir uno de los polos del iman..
tienes razón aunque digan que violan la leyes de la termodinámica es la energía de los imanes ya ven como funciona un alternador de dónde saca la energía ya sé que del movimiento pero la acción principal es el imán que trae dentro ya que sin imanes no funcionaria
buen dato anular un polo así no se produce atracción y solo repulsion. ;)
No pasa por atraccion o repulsion amigo, el disco va a buscar la posicion más estable. Si vos los soltas con una velocidad angular W, el disco va a tender a buscar la posicion más estable cercana. La fuerza entre los diferentes imanes quizas lo acelere hasta llegar a ese punto, pero superado ese punto la velocidad va a disminuir porque va a tender a llevarlo al punto de equilibrio que quedo detras. Puede ser que no lo frene completamente, pero a la larga va a llegar al punto desde donde lo soltaste con un W menor que en la vuelta anterior. A los sumo, si podrias generar un campo magnetico perfecto, al girarlo el eje seguiria moviendose indefinidamente hasta que el rozamiento lo detenga. Y aún más, si no tuvieras perdidas por roce, no podrias ponerle un generador, porque consume potencia mecanica y te lo detendrias. A lo sumo lo que tendrias es un muy buen volante de inercia, pero no un generador de potencia.
imaginate, tomas aire comprimido y lo expulsas sobre un lado de una turbina como la de una aspiradora..elefecto es el mismo..todo el sistema tiene q ser un giro completo como un solo pulso..
El Mu-Metal no anula los campos magneticos, sino que canaliza el flujo. De cualquier forma, es lo mismo, vas a estar cambiando la forma del campo magnetico en el estator pero este va a buscar la posicion más estable y va a pasar los mismo que ya comente. No se de donde sacaste esa analogia con aire comprimido, pero te recomiendo que aprendas algo de magnetismo y energia.
Have you tried a laird vortex configuration? That would make it rotat smoother
What kind o magnets are these?
what if you would try it on a horizontal axle with magnetic bearings? much less friction
To make it work magnets must repel each other (still not working?)
Hello.. I’m interested in your work. Would you help?
Take the numbers: 3, 6, 9!
Bonjour,vous arriverez un jour...
Hello.. how about selling me the wood material? I have the magnets also, what rotter you are using?
great video
incredible, all that show, all that work and still you dont have any magnets motor that worked? I'll make one my self.
I’m interested I. Purchasing parts of your invention. Let me know thank you
I would like to purchase the project. How much? Thanks
lot of hard work
The experiment is correct until near the final video and demonstrates how the left energy = with the right energy. Result zero energy.
Masturbating is not a crime
Stop thinking 2D you need to think 3D. your magnets should be in halbach config vertically . put your vegie/filings between the elements not just consider the fields in isolation ..
Подключи батарейку и будет как у всех!
So I have watched all of these videos and came to the conclusion, you are going nowhere slowly.
??? What's the reason? he shows that the magnets is drawing the iron particles !!! we know that..
Ваша ошибка в том, что у магнитов нет полюсов, если поймёте это, увидите многое.
could you please detail how you did it? thank you