You could put a single bend on the upper rear on the chassis side to help clear the bottom links. This will allow you to keep the better link geometry, instead of raising the mounting spot on chassis side.
Thanks Yep, I should have double bends all my rear link 6 month ago. I just bended my regular injora links. I have double bended the lower links and the upper rear one so they dont hit each other. A couple of trial and error, but now, all my rigs a beast with crazy break angle. Good job 👍
I once made a build, and I used steering links in the rear as a double bend link, it worked great. Stock width axles the steering link seemed to be about the length of a rear C10 link
Have you tried flipping traditional high clearance links around so the bend is at the skid side instead of the axle side? I tried that on one rig and it did the exact same thing you showed in your clip while protecting the driveshaft still. They act as kind of a skid plate as well, allowing the link to slide on the rocks until the tire can make contact.
I think yall are doing too much with these minis. Its weird how yall with put 400 into a mini and try to do 10th scale stuff but wont buy a 10th scale.
i just got done with a build using single bent HC links for all 8 links! a trx4m link set for lowers and gladiator/deadbolt? pairs for the upper links…whatever works 🤷♀️
Looks like they work good to me. I got a set coming from Rc Steve for my athos chassis so I guess I’ll see how they are shortly. Another great video!!
Hell ya got the old school park bike stand in the back ground.
You could put a single bend on the upper rear on the chassis side to help clear the bottom links. This will allow you to keep the better link geometry, instead of raising the mounting spot on chassis side.
On the single bend links, if you run them with the bend on the skid side, you also gain clearance where it matters, similar to the double bends
Lol that fast ending got me😂😂
Had to mix it up a bit
Great video Trey!
Thanks buddy!
Thanks Yep, I should have double bends all my rear link 6 month ago. I just bended my regular injora links. I have double bended the lower links and the upper rear one so they dont hit each other. A couple of trial and error, but now, all my rigs a beast with crazy break angle. Good job 👍
I once made a build, and I used steering links in the rear as a double bend link, it worked great. Stock width axles the steering link seemed to be about the length of a rear C10 link
Good to know!
Sweet video with good info! Always killing it! Have a few sets of links coming from Steve. Been so long I have about bought materials to build my own.
Small brass tubes will take out the play. Just need to find the right size. Tape would also work
Got it. Thanks
Love to see one if these for under/overdrive gearing 👍🏽
Have you tried flipping traditional high clearance links around so the bend is at the skid side instead of the axle side? I tried that on one rig and it did the exact same thing you showed in your clip while protecting the driveshaft still. They act as kind of a skid plate as well, allowing the link to slide on the rocks until the tire can make contact.
I havnt tried that but now I will. Thanks!
Created a catch point.
YEP!! Thanks Brother...
Fuck ya another banger for my lunch break your the best brotha
Hahah, thanks for watching ❤
Another banging hat!!
Definitely need to get some
Yeah man, was pretty impressed with them
🎉🎉🎉🎉🎉2 Bends 🎉🎉🎉🎉🎉
How do you find places to crawl at?
I also enjoy mountain biking and hiking, when doing either of these I'm always scouting for good rock spots
Thanks for showing us this it looked like it worked great to me. that truck is sick.
Those pivot balls are meant to accept larger hardware. Re-use your old pivot balls.
The actual pivotball is too small for the housing rod end thing and my original rod ends didnt thread on tightly.
@@24Yepp somewhere, out there, there exist balls you can get your hands on... lol
@@MysticRiverRC😂
Or a rear link riser
Got a link to Carnage RC?
www.etsy.com/shop/KarnageRCGear?ref=nla_listing_details
Day 7 of askin you to show off your cars 🏴☠️🏴☠️🏴☠️
He could make 88 videos.. i think he said he has 88, on the road to 100.... sounds like alot of footage!
Day 9
Of asking for a tour of the dungeon
Day 10 of asking for
The dungeon tour
Day 11 of asking for a dungeon tour😅
I think yall are doing too much with these minis. Its weird how yall with put 400 into a mini and try to do 10th scale stuff but wont buy a 10th scale.
I have several 1/10s. The minis give me more enjoyment.
Here to drop this fat thumb and listen to some wisdom.
i just got done with a build using single bent HC links for all 8 links! a trx4m link set for lowers and gladiator/deadbolt? pairs for the upper links…whatever works 🤷♀️