How to Connect a Servo Motor Controller and Jog the Servo Motor (Part 1) from AutomationDirect
Вставка
- Опубліковано 26 гру 2011
- www.sureservo.com (VID-MC-0003) In this video we will hook up a SureServo system and quickly jog the servo motor to verify proper operation. You will need a SureServo servo drive, servo motor, a motor power cable, motor feedback cable, and a power source. Most importantly you should have a copy of the SureServo manual. You can download it for free from www.sureservo.com/usermanuals.htm
To learn more visit www.sureservo.com
Check out all of our videos at www.AutomationDirect.com/Videos
To subscribe: ua-cam.com/users/automati...
Facebook: / automationdirect
Twitter: / automationdirec
LinkedIn: / automationdirect
**Prices were valid at the time the video was released and are subject to change.
Related AutomationDirect.com part numbers: SVM-220, SVM-220B, SVM-230B - Наука та технологія
The SureServo product is definitely easy to use and very affordable for what it can do. Although I do wish some of the smaller models could be powered from 120VAC instead of 230VAC 3 phase....!
Even 230v single phase would be fine. That’s what my BST servos are and they convert to 3 phase internally like a vfd. Awesome drives and servos.
so much informative good job
thanks for sharing your knowledge .. I send you a big hug from Argentina bs as
Thanks for watching - we are happy we could help!
AutomationDirect.com hi good
hi mr thank you for all informations, please can you show us how we can command a servopack with a PLC (for example S7 300,400 or 1200 SIEMENS) and a type of signale that we should send from PLC to servopack thank you very much
+achraf bara Thank you for so much for watching our video! For technical questions, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support. Thanks!
Phone: 1-800-633-0405
Email: www.automationdirect.com/adc/Form/User/TechInquiry
Support: support.automationdirect.com/
Thank u very much sir
You are welcome!
We have over 1200 automation tutorial videos including lots of new servo videos here:
www.automationdirect.com/videos ......... by topic
www.automationdirect.com/cookbook ... by subject
hi there, good video. how much is a 3 axis fully closed loop AC servo, single phase setup likely to cost minimum? i plan to retrofit my small cnc mill from crappy and noisy stepper motors to something a lot more accurate and reliable, and of course on a tight budget lol also with limited knowledge on how to do so. also if its any help my machine i plan to upgrade is a Denford Triac. i have videos on my youtube channel of it in operation
thanks in advance for your advice.
Hey +toby bayliss thanks for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support. Thanks!
Phone: 1-800-633-0405
Email: www.automationdirect.com/adc/Form/User/TechInquiry
Support: support.automationdirect.com/
hi, we have a waterjet machine and I have the problem with the servomotor axor brand, it is not running normally at full speed of 150% only 5%, otherwise it will be error if more than that, any suggestions? thank you.
@sherwin requioma, thanks for the comment. If this is running using our SureServo drive I would call into our Tech support team for help. 1-800-633-0405. If not, I would call the drive manufacturer for help. Its sounds, that you either have some overloading on the motor or incorrect setting in the drive.
Thanks
Jai Kumar - We list all of the Servo Motors we offer, along with their prices on our webstore at automationdirect(.)com/servo. Also note that we currently only sell directly to the US and Canada, but we do have several International Partners that you can purchase from. You can find out how to contact our closest international distributor by going to automationdirect(.)com/adc/International/International - Thanks for your interest.
Do you sell that handy looking cable, breaker and e-stop with enclosure setup?
We sell all the components. Some assembly required ... (grin)
Go to Automationdirect.com and search for:
1. "Pushbutton enclosures"
2. "Estop pushbutton" or just "ESTOP"
3. "SureServo Cable"
Use the menu on the left to narrow choices.
Also, keep an eye out for a newer/better/less expensive/single phase servo system in the very near future. Be sure to subscribe to the channel so you are notified when those videos go live.
Hello.. Will your drive work with other servo motors with resolvers..? and vise-versa ..Rgds
Automation Direct’s SureServo servo drives do not support third party motors. They are a matched set and the settings and parameters in the drive are set up to work with the applicable SureServo motors. The encoder feedback signal type is also specific to the drive so resolvers will not work either.
How could we make this driver connect with another keypad? Would it just be directly through an rs485 cable?
You can control the drive via Modbus so any Modbus compatible display, HMI, PLC, Controller could work.
Could you tell me how the orange and yellow cable connects please?
@monkeydjarm. Thanks for the comment. If you are asking about the encoder cable see page C-8 or C-9, If you are asking about the brake connection, Please see 2-22, of the following link. cdn.automationdirect.com/static/manuals/sureservomanual/sureservomanual.pdf
hola que softwre debo utilizar para programar este motor desde ya gracias.servomotor r88d omron 1kw 3 fases 220 volts
HI Jose, AutomationDirect doesn't sell or support Omron products so we can't help you with that Omron part number. Please contact Omron customer support.
@@automationdirect Ok muchas gracias. Cordial Saludo
nice video!a question
you think a 600w servo motor could be used to make a Conveyor Belts?carrying boxes 70 kilos
+ESCOBAR CRISTIAN Thank you for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support. Thanks!
Phone: 1-800-633-0405
Email: www.automationdirect.com/adc/Form/User/TechInquiry
Support: support.automationdirect.com/
Is this applicable to other ac servo driver like MSD041A1XX
Hi Mark, for technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support.
Phone: 1-800-633-0405
Email: www.automationdirect.com/adc/Form/User/TechInquiry
Support: support.automationdirect.com/
Please let us know if you have any other questions!
Thanks,
AutomationDirect
This config servo same or not for servo type leadshine L5-400?
This configuration is only for The AutomationDirect Sure Servo system. I am not familiar with the L5-400 so can't say if it is compatible, but I would venture a guess that it is not ...
sir ,can you help me to resolve the AL13 and what do you means ?
Thank you for the comment, Mohamed.
I am assuming you are asking about ALE13. This is the Fault Stop alarm, which indicated that this fault switch is activated. Please see Chapter 7 of the SureServo manual for more information.
cdn.automationdirect.com/static/manuals/sureservomanual/sureservomanual.pdf
do you offer it with servo cylinder too?
Daniel Schrader No we don't, but stay tuned. We’re always launching new products and we will pass your request along to our Product Management Team.
Hello friend ... I have a Panasonic servo motor with error number 380. do you know what it means and how can it be fixed?
Unfortunately, we don't service Panasonic servos so are unable to provide any guidance ... Good luck with your project!
how to remove AL E6 alarm error from Melservo MJ3 drive??
Hi Zubair, AutomationDirect currently only supports the Sure Servo brand of servo drives. You will need to contact the original manufacturer for info on the MJ3 drive.
Hi! I`m not trying to interfere with your bussines, but maybe you can help me with some advices or tip.. I have this model (mitsubishi melservo mr-c10a)and i`m trying to build a belt grinder for my personal use in the shop. Can you tell me what kind of motor will suit for this controller? A 230/320V 1.5 kw will help me with this type of controller? Much apreciate!
Hi Ciobanu, Unfortunately, The servo motors we have only work our drives so they wouldn't be appropriate for you Mitsubishi drive.
I was asking your opinion for what kind of electric motor to buy for that controler.. but obviously you know the answers only for the motors you have. Sorry for the question, i`ll try somewhere else.
@@dignitas1980 No problem - good luck!
Can you help me about controller moment servo SGDA- 01AP. I don't know how to way
Thank you for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support.
Phone: 1-800-633-0405
Email: www.automationdirect.com/adc/Form/User/TechInquiry
Support: support.automationdirect.com/
Please let us know if you have any other questions!
Thanks, AutomationDirect
Ok, thank you so much.
Can you help me about Homing Definition Value !
Thank you for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support.
Phone: 1-800-633-0405
Email: www.automationdirect.com/adc/Form/User/TechInquiry
Support: support.automationdirect.com/
Please let us know if you have any other questions!
Thanks, AutomationDirect
inbuilt fan reg
Whats the problem if the monitor show AL 05
Hi Raja, I Assume you mean "ALE 05?" That's a regen error. Page 7-5 of the user manual shows you how to troubleshoot that. In a nutshell, The Regen Resistor is not connected or the parameter settings for regen are not correct.
Is it possible for me to run my drive off only a single phase connection?
The smaller ones yes - 230VAC single phase - the larger 2KW and 3KW drives require 3 phase, 230 of course ....
@@automationdirect Thank you for this, I have a small one that I had to test from home for a project, I looked through the manual and saw how to connect it
@@vinje3802 You are welcome!
Did you know that we have over 1200 Automation Tutorial videos at:
www.automationdirect.com/videos .............................. by category and random search
www.automationdirect.com/cookbook ........................ by topic
were did you get that
+Living 3d Animations You can get all of the products featured in this video at AutomationDirect.com. Thanks!
Hello.. I am in India... Where can I buy your drives? I need 5KW drive...
GM, thanks for the comment. Our international Sales for Asia can be found here: www.koyoele.co.jp/english/ I am unsure if they sell this servo system. Please see their website for product offerings. Thanks
1/2 HP 3000 RPM
Hello friend ... I have a servomotor with error number 380. do you know what it means and how can it be fixed?
Which brand servo are you using? That doesn't sound like a SureServo error number ...
@@automationdirect Hi friend, thanks for replying. This servomotor is panasonic brand MADHT1507CA1 200 volts which presents a message that says error 380. I hope you can help thanks
@@automationdirect Hi friend, thanks for replying. This servomotor is panasonic brand MADHT1507CA1 200 volts which presents a message that says error 380. I hope you can help thanks
@@industrial.inoxidable Unfortunately we don't know anything about Panasonic Servos ... We sell and service the SureServo brand ...