I’m really surprised Wolverine didn’t make the list. Minimal leg printing and no cowl for the first fig and comparing that to the CMF is such a hugeeee upgrade
3:00 Fun Fact: The only actual update to the Loki helmet piece, is the swap from the original flat gold, to the current pearl gold, although it sometimes can come out a bit weird in color. (I have two of the new Loki's, one has a too strong head stud connection, and a normal colored helmet. The other has a good head connection and an almost greenish tint to the helmet, and far more shiny)
I also have to say, the perfect version of the Vision minifigure to me would be one with a silver head with the face printed on with no weird discoloring, and the new print design on that much more accurate original sand green, and maybe give him a new gold colored cape finally lego.
Happy new year Ryan, I must admit that I loved your first options, specially the Cap, but Cyclops I wouldn't consider a remake cause both figures represent different uniforms.
13:37 Ok, this made me laugh. As much as I like customs, I draw the line at stuff like this. I really only like customs that seem like what Lego would do officially given a CMF budget. Recently I was looking for a Miles Morales 2020 variant from the Spider-Man PS5 game & there were 2 out there I saw. One by Jin Custom which had the jacket as an extra accessory you slide over the torso which just looked weird & one by Phoenix Customs which just printed the jacket design directly onto the torso which felt a lot more purest & what Lego would officially do. It’s a similar case with the knockoff Gambit & Spider-Man Noir where they would just use a big plastic piece which goes over the torso to represent the trench coat. That just feels wrong to me.
At 5:28 when Ryan said this was the first Iron Man Minifigure, that actually is incorrect. There was an Iron Man figure that came out before this one as a New York toy fair exclusive the same year (2012)
True! I have that figure as well. Although you could argue the Toy Fair figure was an exclusively released prototype, and the Mark 7 was the first full figure.
I agree with most of the list, but i do think the Cyclops comparison is a little unfair given how both figures are of different costumes from the X-Men books. The original minifigure is based on the John Byrne costume from the 80s (if you seen X-Men 97 you may recognize it from the last few episodes of Season 1), while the 2024 minifigure is more in line with the Jim Lee redesign from the 90s. While I generally prefer Lee's design for Cylcops and think the newer minifigure captures it extremely well, its a completely different aesthetic to the Byrne design which the original minifigure did an ok job at replicating
The original cyclops is based off a different suit, that’s why it has a more basic design and no hairpiece. It’s similar to the suit from the end of x men 97
Love the new Loki Minifigure especially with the rubber cape. @RyanSevelVlogs, do you have any misprints in your collection? Will we get a Marvel Minifigure update? I know it’s not marvel but I love the new Batman Cowl that has dual moulded white eye
I don't think I have any misprints. I did an update during the 2024 review video, so next time I'll make one is probably when I get all of the Jan 1 figures.
Well he does have couple of looks in the comics, but I'd rather get return of the original mask, printed fur on arms like cmf cat costume girl, a fur collar like TLBM Penguin in orange and legs with pink/purple trunks and the colorful pattern from previous minifigures.
@ it’s alright I honestly could care less anyways I just found it funny that you didn’t notice a large piece of hair on a plastic toy you collect for a hobby that’s also bright in color
In my opinion, I really dislike the new Iron man head molds, I recently got the avengers tower set and I’m planning on buying the mark 7 and a war machine helmet in the old molds for it, since I honestly would rather display them with the new prints but old mold
I don't mind the new helmet, but I wish it wasn't a swap out, and more of used along with the other two molds. The original for those classic suits, the one piece for those with smaller helmets or ones that don't open like the Iron Legionnaires, and the new one for the more unique ones, like the Mark XXV, Striker, Mark L, Bleeding Edge, and Mark LXXXV, Ultimate Armor (the nanotech suits). Why limit yourself to just one when you could make everybody happy and use all of them?
When it comes to the Iron Man MK 7 minifigure… I agree that the new torso, legs & face print are the superior version, however I prefer the original helmet. Or at least for the earlier & bulkier suits in Tony’s Armoury. The newer helmet, however, I think goes best with Tony’s later, more high tech/ upgraded & sleeker suits. Such as the nano-tech MK 50 & 85 suits & maybe the latter half of the MK 40s suits, such as maybe the MK 46 & 47.
I'd disagree with MODOK,while the original figure could use a better chair I think it better gives of the vibe of a mad scientist that got a big head,new one doesn't really give the me same appeal, his limbs are too short and he is too big. I agree with rest of the list though.
I’m really surprised Wolverine didn’t make the list. Minimal leg printing and no cowl for the first fig and comparing that to the CMF is such a hugeeee upgrade
Ooo that’s a great pick!!
Love your videos Ryan. Keep up the amazing work! The content, editing, and V.O. never disappoint.
GREAT RYAN SEVEL LEGO MARVEL MINIFIGURES REMAKES 2025TH
The original wolverine is one of the best minifigures of all time
3:00 Fun Fact: The only actual update to the Loki helmet piece, is the swap from the original flat gold, to the current pearl gold, although it sometimes can come out a bit weird in color. (I have two of the new Loki's, one has a too strong head stud connection, and a normal colored helmet. The other has a good head connection and an almost greenish tint to the helmet, and far more shiny)
I also have to say, the perfect version of the Vision minifigure to me would be one with a silver head with the face printed on with no weird discoloring, and the new print design on that much more accurate original sand green, and maybe give him a new gold colored cape finally lego.
Happy new year Ryan, I must admit that I loved your first options, specially the Cap, but Cyclops I wouldn't consider a remake cause both figures represent different uniforms.
The Iron Man from the Iron Legion battle pack is probably my favorite :)
13:37 Ok, this made me laugh. As much as I like customs, I draw the line at stuff like this. I really only like customs that seem like what Lego would do officially given a CMF budget. Recently I was looking for a Miles Morales 2020 variant from the Spider-Man PS5 game & there were 2 out there I saw. One by Jin Custom which had the jacket as an extra accessory you slide over the torso which just looked weird & one by Phoenix Customs which just printed the jacket design directly onto the torso which felt a lot more purest & what Lego would officially do. It’s a similar case with the knockoff Gambit & Spider-Man Noir where they would just use a big plastic piece which goes over the torso to represent the trench coat. That just feels wrong to me.
EXCELLENT RYAN SEVEL WORK. HAPPY NEW YEAR
Great video happy new year
I honestly disagree with cyclops because the first version was based of the astonishing x-men suit and these are just two diffrent suits.
At 5:28 when Ryan said this was the first Iron Man Minifigure, that actually is incorrect. There was an Iron Man figure that came out before this one as a New York toy fair exclusive the same year (2012)
True! I have that figure as well. Although you could argue the Toy Fair figure was an exclusively released prototype, and the Mark 7 was the first full figure.
Hey Hey, Ryan! Happy 2025 ❤👍
I agree with most of the list, but i do think the Cyclops comparison is a little unfair given how both figures are of different costumes from the X-Men books. The original minifigure is based on the John Byrne costume from the 80s (if you seen X-Men 97 you may recognize it from the last few episodes of Season 1), while the 2024 minifigure is more in line with the Jim Lee redesign from the 90s. While I generally prefer Lee's design for Cylcops and think the newer minifigure captures it extremely well, its a completely different aesthetic to the Byrne design which the original minifigure did an ok job at replicating
The original cyclops is based off a different suit, that’s why it has a more basic design and no hairpiece. It’s similar to the suit from the end of x men 97
Love the new Loki Minifigure especially with the rubber cape.
@RyanSevelVlogs, do you have any misprints in your collection?
Will we get a Marvel Minifigure update?
I know it’s not marvel but I love the new Batman Cowl that has dual moulded white eye
I don't think I have any misprints. I did an update during the 2024 review video, so next time I'll make one is probably when I get all of the Jan 1 figures.
@@RyanSevelVlogsjust followed you on TikTok
I thought what you did with Cyclops was unfair 😂, they are two totally different versions
I could see that. But what LEGO did to Cyclops in 2014 was unfair too. Thankfully we have a great version now.
I agree with the list this just shows you how good Lego marvel is
Tbh I think thor rlly needs a glow up bc the way he's looking now a days isn't the bedt
I wonder how Killer Moth would be remaked
Intersting question...
Well he does have couple of looks in the comics, but I'd rather get return of the original mask, printed fur on arms like cmf cat costume girl, a fur collar like TLBM Penguin in orange and legs with pink/purple trunks and the colorful pattern from previous minifigures.
they should make a set with the watcher and ultimate ultron and it is basically just glass walls and the watcher is battling ultron
Does your original vision have a crack or dent??? Because that’s what it looks like
I think that's a dog hair... haha
@ I can see it now but I wonder how hair got on the figure without you noticing I mean you literally filmed the video?
@@JudeMckeever That was back when I was getting footage of over 600 figures. I was in a trance for most of that repetitive process.
@ it’s alright I honestly could care less anyways I just found it funny that you didn’t notice a large piece of hair on a plastic toy you collect for a hobby that’s also bright in color
Both modoks are great
How is Vision a controversial choice? It’s a fantastic figure that improves the old one beautifully!
In my opinion, I really dislike the new Iron man head molds, I recently got the avengers tower set and I’m planning on buying the mark 7 and a war machine helmet in the old molds for it, since I honestly would rather display them with the new prints but old mold
I don't mind the new helmet, but I wish it wasn't a swap out, and more of used along with the other two molds. The original for those classic suits, the one piece for those with smaller helmets or ones that don't open like the Iron Legionnaires, and the new one for the more unique ones, like the Mark XXV, Striker, Mark L, Bleeding Edge, and Mark LXXXV, Ultimate Armor (the nanotech suits). Why limit yourself to just one when you could make everybody happy and use all of them?
You going to update your Lego marvel master spread sheet with the new 2025 mini figure
That’s the plan!
When it comes to the Iron Man MK 7 minifigure… I agree that the new torso, legs & face print are the superior version, however I prefer the original helmet. Or at least for the earlier & bulkier suits in Tony’s Armoury. The newer helmet, however, I think goes best with Tony’s later, more high tech/ upgraded & sleeker suits. Such as the nano-tech MK 50 & 85 suits & maybe the latter half of the MK 40s suits, such as maybe the MK 46 & 47.
Why did you pick the cyclops from the jet where the one from the mansion has leg prints?
I'd disagree with MODOK,while the original figure could use a better chair I think it better gives of the vibe of a mad scientist that got a big head,new one doesn't really give the me same appeal, his limbs are too short and he is too big.
I agree with rest of the list though.
I think MODOK works better when is disproportionally larger, further removing him from "man" and closer to "machine." But I do see your point!
what is the display board u use? i want it too
I use ShopPopDisplays! Link is in the description for ya!
@ thanks
I hate the new Iron man helmet
Maybe they should make a marvel mech suit for rhino ?
Well they did in 2014 but he could use a new one with some Spider-Man variant or another villain like Scorpion or Beetle.
Wow Marvel avengers LEGO💥😱🛸🚀🔥🔥🔥🔥
I want Lego to do a rhino meck
Rhino suit is the mech with the person inside
If you blur your eyes looking at the thumbnail image for the video it looks like a bong
the old iron man helmet is 10000000000 better
I dont like the new Iron Man helmet
3rd
New Ironman Helmet >>>>>>>>> Old Ironman Helmet
AAAAGGGGAHAHAHHHHHH
We are in desperate need of an upgraded/ newer version of Deadpool, quicksilver, antman, and professor X. Both the ones we got of Charles r soooo bad
Proffessor X can be upgraged with a simple torso swap, but YES we need a new Quicksilver and Deadpool.
With new Quicksilver torso there's possibility of Ted Kord Blue Bettle custom.
2nd comment hell yeah!!
If cyclops (2024) had the 2015 jay hair and yellow hips he would be one of the best marvel minifigures ever.