Hey, It's me again. I like your channel and I just got done watching your Air filter replacement video. I'm all hands-on for my 2000 Chevy Lumina. It's only been to the mechanic (Noble, at the time, It's now Gregg Young) and that was to diagnose a certain noise, that noise was apparently the Harmonic Balance Pulley, and it ended up breaking on my Sister. We replaced it ourselves out in the freezing cold at the end of Hardee's parking lot (believe it or not, but she had driven it like a MILE after the pulley broke and fell off. There were a few stops at stop signs then) This was about a year ago and she has quit hardees; When it was in their parking lot over night, we went there the next day to fix it and it was snowing and the snow and ice from the parking lot kept melting and puddling to where we were working....The conditions were awful that day...and it was like 33 degrees F with a windchill of about -3F...and the wind was blowing right at us....the snow and ice were melting because they had salted the parking lot earlier that morning.
I was able to get the middle spark plug boot off near the firewall on my 1995 Chevrolet Lumina. Of course I didn't move the engine like you did, which made it difficult to position the spark plug socket on it, and then just as difficult to position the new one to get it in place. Now I can't seem to get the boot back on the new spark plug. I don't know if you omitted anything in the video, but I am going to take you at your word that moving the engine will help me get that boot back on. My concern is that I might damage something as I tilt the engine forward the inch and a half that you did.
i have been told do not do the pull your engine forward crap undo the alt push it upwards not down to get it out the way grab some extentions with the knuckle and there you go
Hey, It's me again. I like your channel and I just got done watching your Air filter replacement video.
I'm all hands-on for my 2000 Chevy Lumina. It's only been to the mechanic (Noble, at the time, It's now Gregg Young) and that was to diagnose a certain noise, that noise was apparently the Harmonic Balance Pulley, and it ended up breaking on my Sister. We replaced it ourselves out in the freezing cold at the end of Hardee's parking lot (believe it or not, but she had driven it like a MILE after the pulley broke and fell off. There were a few stops at stop signs then) This was about a year ago and she has quit hardees; When it was in their parking lot over night, we went there the next day to fix it and it was snowing and the snow and ice from the parking lot kept melting and puddling to where we were working....The conditions were awful that day...and it was like 33 degrees F with a windchill of about -3F...and the wind was blowing right at us....the snow and ice were melting because they had salted the parking lot earlier that morning.
Very informative and concise video
You can also just have someone shake the car and one other person put the parking brake on when there is space in the back.
I was able to get the middle spark plug boot off near the firewall on my 1995 Chevrolet Lumina. Of course I didn't move the engine like you did, which made it difficult to position the spark plug socket on it, and then just as difficult to position the new one to get it in place. Now I can't seem to get the boot back on the new spark plug. I don't know if you omitted anything in the video, but I am going to take you at your word that moving the engine will help me get that boot back on. My concern is that I might damage something as I tilt the engine forward the inch and a half that you did.
It's ok to leave the air filter assembly (Not sure what to call it) attached?
I don’t see why not
AutOdometer thanks. I'd rather leave it on. So I'm glad it works out
I did it without moving the engine I got small hands and it was all I could do to get #5 plug wire back on lord that was difficult!
Is there any other way to do this? Help. Thanks
Pulling the motor forward is leading cause a motor mount tear & start leaking fuild..be careful
Top end of the piston, using a Bore scope😂
Piston
Looks like the piston.
what looks like a piston?huh?
Freeze plug
Afinación pontiac montana video
valve
Pistonslap
i have been told do not do the pull your engine forward crap undo the alt push it upwards not down to get it out the way grab some extentions with the knuckle and there you go