I'm used to larger, corded routers ua-cam.com/users/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
UA-cam needs a double like or love button! Watching your videos and I was able to complete my two squares the first go! Thanks a million. I've also ordered a laser module which should be here today!
i Admire your honesty, in that it took 5 hours ,well for me it took alot longer on and off, the board got fried i got a new one, it homed perfect so i new the motors where correct but when i started a job the Y axis went in the opposite direction, well through persistence i found the problem ! i plugged the y axis stepper into the next slot on the board and hey presto it works ! Your video are very good easy to follow ,im sure your videos have helped lots of people
WOW thanks for providing such a complete vid. I purchased my 3018 a couple months ago and watched hours of UA-cam, yours is far and away the best. My fear of clicking the start button is gone lol.
I fired it up for the first time tonight and it worked without any problems. Used candle on a linux machine, but it was pretty much the same as your instructions. Thanks for taking the time to make these videos.
Your videos are awesome. Just got my CNC last night and made my first cut today. You videos and links to software were SO helpful and saved me so much time. Can’t wait to do a more detailed project. Thanks again!!!
I want going to watch this video because I had already put mine together, but i decided to start at the beginning of this series to get any insights. I would have saved so much time of is watched this video first, and i feel like an idiot. After watching this i now realize that i put the "y" motor at the front. I knew i had something wrong. Well, back to the shop and reassemble it. Big thank you!
Thanks SO much for your very informative videos, James. I wish I had found your site 5 days ago. It's taken about that long for me trying to figure out what you covered in about an hour. CHEERS!
Hi James! Just wanted you to know that with your marvelous tutorial I was able to execute my very first CNC cut perfectly! It was a simple circle I designed in Easel that I then imported into UGS. Thanks so much!
It's a different experience watching these videos and trying to copy what you are doing with my own machine instead of watching and then trying to replicate. I was for sure leaving my bit too far extended, something I'd totally forgotten about. Making ample use of the pause button this go around! :)
Great video James. Helped me a lot. Bought a cheapie Chinse unit expecting issues, but to my surprise, all went well. Did my first cut after watching your video, no issues at all. Unit is not Sainsmart brand, but does what it should do. Keep up the good work.
Cheers for this. Extremely helpful and well presented tutorials :) A few issues that I had (that you didn't) mentioned below, complete with suggested fixes, in case anyone else has the same troubles. My 3018 pro model had the X motor mounted on the left side instead of the right, and it worked back to front and jammed a lot! Rebuilt the machine with it on the right and it worked fine, although the X bearing ended up on the outside instead of the inside, but that doesn't seem to matter. My software just has Z+ and Z- buttons, with no direction arrows (up/down), so I missed that it also worked the wrong way around. Caused very nasty noises on the first test! Realised then that the makers had reversed the Z motor in the firmware, instead of the X, and so I ended up with two motors that went the wrong way!!! Just swap the red and blue wires around on the stepper motor connection plug if it happens to you. Lift the plastic tab on the connector with a craft knife and the connector will pull out. Other fixes are possible of course.
Hi Clark .... I know exactly what you are talking about, because I had that same question regarding the X axis bearing. I think I was in the same situation as you a week ago! . Additionally, the Y axis of my machine moves in the reverse direction, I think it is solved by configuration in the driver. In my case the driver was made by Annoy Tools, and it really looks great. Additionally, I think I will have to move the X axis-Y axis set towards the center, since I suppose a zero position in the lower left corner, but it will look different from the photo in the manual !! In conclusion a true DIY project ... but I'm enjoying it! Thanks for posting your experience ... best regards!
@@EfrainRoca Hi Efrain, your board looks more advanced than mine. Spindle upgrade for me next, as mine is sadly lacking in speed. I will connect a relay to the existing spindle wires, and that will switch the new 20000 rpm 775 motor on and off. Power for the new motor will then be from a separate supply, with a PWM speed control. James Dean recommends a similar set up in his upgrade vid, but I think the addition of a relay and speed control will make a big difference. All the best with your projects. No more hand cut inlays soon, as my eyesight isn't getting any better ;) You can see some of my stuff here: ua-cam.com/video/5cDZavyiAnQ/v-deo.html
Thank you. Thats always good to hear. There are ways to support the channel in the video description but just knowing the videos help people is what makes me happy
hi james, seems like the 3018 is very popular so i purchased one and just got it together. with your great video i am getting ready to create. thanks :)
A big thank you for you good sir for making this video and and the one before. Helped me a lot in assembling and setting up the 3018. Thank you again, from Indonesia.
Thanks for recommending UGS platform I'm going to check that out now. I've tried a variety of software so far some basic and some complex, but that one looks like a nice little mix with some UI choices I prefer. I appreciate your honesty toward the end of the video as well. Thanks for a great vid, you've certainly got another subscriber here!
James great videos. Like you, I spent many hours just to complete my first cuts. As you can tell I am an absolute novice but you have inspired me to give it a go. Many thanks
@@JamesDeanDesigns Thanks for this video, very helpfull! About Easel, is it free to use? I am using the trial version now but think it's only free for 1 month? Is there any other alternative that's free and just as easy to use as Easel? thanks for the reply
@@michaelsiebenheller4468 Easel is easy but also a little limited in comparison so some other software. You used to get so many free days a month and then they switched to a one off trial period unfortunately although basic functions are still free. Carbide Create is also free, but in a similar way it holds back its best features for people who pay. Unfortunately good free software is very limited at the minute
Great video James. To get into CNC, I bought a 100x100cm Workbee, which came with no spoiler board, no clamps, no software, and a DeWalt quarter inch router that is NOISY! This one seems a lot more beginner friendly. I'm still struggling with clamping a year later.
Thank you. It's still a little noisy but its like comparing a Dremel to a 1/2 inch router, these things are rated at under 100w I believe so not that powerful. Id certainly say this is more forgiving if you make mistakes, and because of its low power you're making lighter passes so its not like your going to take a big chunk out of a piece by mistake.
Thanks James. My 3018 Pro-Max has just arrived and I’m building it tomorrow. I will be following your videos studiously. I must admit, just looking through the parts, I’m quite impressed. The machine is of all aluminium construction.
Thank you so much for that end statement... that made me feel so much better, cause my build took me a few days.Thanks to holes being too small on one side frame, plus some bolts too long, mixed in with my big gorilla hands blind eyes and a tonne of swearing. ❤😂❤
Subscribed. I just found your channel after buying the upgraded pro-m version with the 7w. Laser. Should be arriving next week. Really enjoying your easy to follow instructions, and hopefully will see much more to come from you!
What I do to zero the Z-axis is to lower the tool using baby steps until it is just above the workpiece, I then slacken the bit until it drops to the surface and then tighten and register as home, this is a quick and reliable method.
thanks for this and the words of encouragement at the end, my cnc kit is still in the box, saving this for later, when I plucked up the courage to build it
@@JamesDeanDesigns it went great, but I'm struggling to understand how to determine size of downloaded cut in comparison to the size of the board as well as where/how to change that size if it is too big and how to change depth of the cut, make sure that software knows top speed of the motor, which drill bit I'm using. The more I delve in the more confused I am!
Pretty sure I ordered this with the extension cause of you!!! Very very informative videos!!! Went through the link you had so hopefully you get credit.
Thanks for this video! Informative and definitely give some good pointers. If you make another one, you may want to talk a little bit more about the clamps and also how to avoid hitting them with the tool. You got a little close on that second square cut!
Thanks James, followed your instructions, they have been very helpful and i have now made my first cuts. Looking forwards to your other posts. Please keep going.
thanks for the video, I have had my 3018pro for about 12 month now and I have only had 1 successful project of it up to yet so I am hoping in your future videos I can see what's been going wrong and how to improve my success rate,,
This is my next step in the morning, I have a dongle to plug into My Laptop so I assume everything will be on that and could be different to your software ... Great Video ..
I had trouble with the table jamming up in Y moves. I found out when i tightened Y leadscrew up (block underneath) it distorted the table. I got round this by inserting two pieces of thin card under the block till i got free movement with everything tightened up. So be prepared for these kind of setbacks..eventually all will be well.
i DId a x-axis thats really the y-axis video with this being the end issue. thx for commenting. basically I also took the drill gun to straightin the 2 mount screws up and down. so I would not need too much oil later. I put the rod in the drill gun chuck and rotated thru the part. but once the machine it jammed like your issue. I need to also try your cardboard trick thanks.. I was getting to do something similiar myself.
@@apkiller10 I've had no more problems since the cardboard cure..i think it was about 15 thou I had to put under..but i guess it would vary for each machine.
@@Mogul25Years yea that part is cheap plastic. but it got me to think about the smoothness of the bottom rails, and if its bending too much. I guess the other variation to fix it is, file down the part if its too big. I have to fix anouther axis soon too, and just got it to sit on bed on top of 4 wood blocks so can take out head without much disassembly. I have a duel monitor attached to back. so my assembly gets messy quick.
James I love your tutorials. I can't understand why my spindle isn't reaching the wood to carve. It's hovering over it and following the design but not going down enough to carve. Hellllppp please
Bit late here, but either the Zero was not set correctly, or the spindle is not sitting low enough in the holder to touch the wood. I hope you have managed to solve it
I am working my way through your video, I have just got the machine and the UGS connected and find the lowest i can get the tip of the cutter from the bed is about ten millimetres. As I intend working on sheet acrylic I now have to resolve this issue!
I just purchased a 3018 and have found your channel to be extremely helpful. I'm having one issue that I can't seem to figure out. I'm sure it is something simple. Maybe you can help. I'm using Easel to design and UGS to cut per your recommendation because I have some internet connectivity issues in my shop. When I open the G-code in UGS after I've downloaded it from Easel, the size of the workpiece is dramatically smaller in the visualizer than the dimensions I entered into Easel. For example, I enter 177 by 165 in Easel. It opens in UGS as ~144 by 132. I've tried changing the units to inches with no luck. I've tried running it as is and it only cuts the portion seen in the visualizer. Your thoughts on this issue would be greatly appreciated.
Hi James Just bought a 3018s cnc .got everything set up ,but how do i generate a grbl code for first cut. (I am a spanner jockey so this is all new to me. Cheers Steve
You need some design software. Easel is considered one of the easiest to start with although a lot of people move away from it once they get some confidence. These videos may help ua-cam.com/video/onFWsPRjy-w/v-deo.html ua-cam.com/video/EZEropgZ_FY/v-deo.html ua-cam.com/video/EMI97Rcb0bQ/v-deo.html
The end comments says all... The software that arrived is not compatible and theres a lot of issues to understand how it all works. Thanks for the very easy-to-follow tutorial...
Great info James. I am having trouble with my job paths running off on my 3018 pro. The zero is shifting 10-15mm on the y axis only part way through a job. Do you have any ideas why this could be? ThanksCbris
Hi James.. I found your videos easy to follow and they got me started with the laser. However I'm not having the same success with the router. I've downloaded UGS, but it must be be my OCD or something but I can't get past the fact that your software looks different. I would love to be able to see a grid of the work area just like Yours, but doesn't matter what I seem to do, I cannot find this feature in UGS. How do I setup UGS? Thanks
You can use Candle or Openbuilds Controller as well. My preference is just UGS. There download site has been a bit temperamental recently but I think it is back up and running now
Thanks James! Do you have a video on how to know exactly where your starting point will be? I've got some shaped pieces that I'm wanting to carve into and I cant see how to make sure it's going to start carving in an exact spot. Make sense? Thanks! Jay
Hi James I have just purchased a sainsmart 3018pro have you any tips for improving the coupler on the pre assembled z axis unit as this came loose and ruined the test piece, the grub screws actually vibrated loose could I use locktite to hold them in also when will we see more videos in your carveco series Thanks Pat
Hey James, could you do a video of the actual connecting of the unit to the computer? plus minor trouble shooting when you start the unit up, before actually running a test piece. My 3018 doesn't have readable instructions and what IS in the manual, is in Chinese. So I had no way of determining what is negative or positive. I didn't even know which is the power input, as both my connections are the same size, so silly me, hooked the power cord into the spindle motor, and of course it started spinning... still not sure if its spinning in the right direction anyway. But finally got it hooked and connected, BUT is it supposed to be making a squeaking noise when I move it back and forth? plus, when you say you press the arrow forward, and the table moves backwards.... mine isn't moving backwards, it moves in the direction of the arrow... And I HAVEN'T even done the test piece. lol
Hi James, Thanks for your truly detailed videos. They have helped me to get started with the router. I love using Easel but had a problem with the cutting depth when trying to cut out a shape (using tabs) and engraving. The 3018 only cuts 1/3 or less than the specified depth. I cannot get a shape cut out. I did the same job sending the g-code from Easel to UGS Nightly build platform and it does exactly the same. I cannot get the router to cut to the specified engraving depth, or full depth to cut the job out, despite that the visualizer showing the full depth of cut. When you watch the progress on the laptop, it shows the depth being increased with each pass till it gets to the specified depth on the screen. In reality it's no where near that depth. Another question, how do you ensure that the G-code will raise the cutter before starting the job, or must you give it a manual offset by raising the bit before you start the cut? I have taken the cutter to my preferred staring point and zeroed all axes. When the cut start, it ploughed straight into the job, not raising the cuter first. Any advise is greatly appreciated. Did you ever post a video on how to use the laser? A link to this would be very helpful. Thanks so much for your wonderful videos.
Hi Bruce. First thing I would say is Easel has some known issues with depths and coordinates. So much so that I have now moved away from it since making these videos. I would start by trying another free program such as Carbide Create and just create a simple circle or square and see how that works out. If the issue remains then its almost certains it's something in your machines settings. You might need to do some manual tests, for example if you tell your Z axis to move 20mm does it actually move that far, or is it more like 10mm? The GRBL settings that control this are $100, 101 and 102. Typically they are set at 800 or 1600 but all three should be the same. In terms of raising the cutter before starting, some software programs this in automatically but others do not. What you can do is set your zero points, then manually raise the spindle by 10mm before pressing play. This is usually what people have to do who use Fusion 360 the export their gcode.
Hmmm. Where did I miss the part where we make some kind of a PHYSICAL connection via USB from a computer to the 3018?? It wasn't in the build video and, although I ca see a blue USB cable at the start of this video I can find no place where any such connection is made. This, even though we were walked through the build at a detail level where we watched zip ties being trimmed. This matters, because my unit has an "offline controller" and that looks like I am supposed to use sneakernet and carry micro SD cards between my computer and the 3018 (which, of course, I would rather not do).
I am sorry if this has been covered but, what software are you using in this video? I am transitioning from laser engraving with LightBurn to using the router head and Lightburn does not support this.
You mentioned quirks in Candle...is one of them not having the machine start at the home setting as set with the software? I have set the position of the head and zeroed out as in the tutorials, but the machine starts cutting where the screen shows the cutter and the head does not move from the set zero position and go to where the screen shown the cutter. Any help you can provide or should I just download and use UGS?
Have to zero the z axis with a homemade or one online from builders and business. There about 8 bucks. With the z axis calibrated you'll be able to set z in the design/tool path then exported to g code.
James, great video. Mc built ok and moves with the offline controller. I cannot download the driver files from the supplied USB stick. Any tips please?
Hi James. Just set up mine and found out the Z controls are back to front. Push up button and it goes down and push down button the head goes up. Hence the test is backward with the up down.
Hello 🙂 Do you think you could help me? I've finally set up my CNC 3018, and I'm trying to laser cut. It seems to be functional, the light is on, and my computer recognises the machine. However, when I try to use the laser from Adobe Illustrator, it can't locate it as a 'printer'. When I try to use GRBL Laser, it SAYS that it's found the machine, but when I run my cut, nothing physically happens, despite the program saying that it's completed the laser cuts. I'm so confused! X
Muc-off Dry Lube - amzn.to/3fA76qp
Cable spiral protectors - amzn.to/3fBa3XQ
CA Glue - amzn.to/3q5TcBZ
Blue painters tape - amzn.to/392QXYr
Dust shoe - tidd.ly/3adnWe9
I'm used to larger, corded routers ua-cam.com/users/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
I wish i had the words to express my appreciation for all the problems you’ve helped me fix over the years!
UA-cam needs a double like or love button! Watching your videos and I was able to complete my two squares the first go! Thanks a million. I've also ordered a laser module which should be here today!
i Admire your honesty, in that it took 5 hours ,well for me it took alot longer on and off, the board got fried i got a new one, it homed perfect so i new the motors where correct but when i started a job the Y axis went in the opposite direction, well through persistence i found the problem ! i plugged the y axis stepper into the next slot on the board and hey presto it works !
Your video are very good easy to follow ,im sure your videos have helped lots of people
WOW thanks for providing such a complete vid. I purchased my 3018 a couple months ago and watched hours of UA-cam, yours is far and away the best. My fear of clicking the start button is gone lol.
Omg.. You are a life saver. For a 50something who knows absolutely nothing about this machine, I have managed to make my first test cut😘
Glad it helped :)
I fired it up for the first time tonight and it worked without any problems. Used candle on a linux machine, but it was pretty much the same as your instructions. Thanks for taking the time to make these videos.
Excellent 👍 glad its all worked
Your videos are awesome. Just got my CNC last night and made my first cut today. You videos and links to software were SO helpful and saved me so much time. Can’t wait to do a more detailed project. Thanks again!!!
Glad they helped 👍
Greatest way for a beginner to get info on CNC - especially the technical quality of presentations/education
Thank you very much 🙏
I just bought a 3018 pro myself, thanks for the video! It was really helpful, especially as I'm new to CNC machines.
Can a laser head be added to this machine, please?
After playing around with my new 3018 for a day, your video was the first that actually let me do...anything! Thanks!
Glad I could help!
I want going to watch this video because I had already put mine together, but i decided to start at the beginning of this series to get any insights.
I would have saved so much time of is watched this video first, and i feel like an idiot. After watching this i now realize that i put the "y" motor at the front. I knew i had something wrong. Well, back to the shop and reassemble it.
Big thank you!
At least you have found the issue and not wasted any more time, that is the main thing 👍
Also, thank you very much for supporting me. It is really appreciated.
Followed your instructions and carved a square without any dramas 😊 Thank you for enduring the pain so us mortals don’t have to 👍
Glad it all went smooth
Thanks SO much for your very informative videos, James. I wish I had found your site 5 days ago. It's taken about that long for me trying to figure out what you covered in about an hour. CHEERS!
The end of this video made me feel so much better since it took me a few hours to get to the end. Thanks for the great work
Hi James! Just wanted you to know that with your marvelous tutorial I was able to execute my very first CNC cut perfectly! It was a simple circle I designed in Easel that I then imported into UGS. Thanks so much!
That's really nice to hear, thank you.
thanks, greetings from Portugal: much better than the original manuals and instructions!
Thank you very much 😊
It's a different experience watching these videos and trying to copy what you are doing with my own machine instead of watching and then trying to replicate. I was for sure leaving my bit too far extended, something I'd totally forgotten about. Making ample use of the pause button this go around! :)
As long as they are helping! I'm still learning new things about this machine my self 👍
Great video James. Helped me a lot. Bought a cheapie Chinse unit expecting issues, but to my surprise, all went well. Did my first cut after watching your video, no issues at all. Unit is not Sainsmart brand, but does what it should do. Keep up the good work.
Glad it all worked 👍 Mine isn't Sainsmart either. I had a few issues with mine but got there in the end.
Cheers for this. Extremely helpful and well presented tutorials :) A few issues that I had (that you didn't) mentioned below, complete with suggested fixes, in case anyone else has the same troubles.
My 3018 pro model had the X motor mounted on the left side instead of the right, and it worked back to front and jammed a lot! Rebuilt the machine with it on the right and it worked fine, although the X bearing ended up on the outside instead of the inside, but that doesn't seem to matter.
My software just has Z+ and Z- buttons, with no direction arrows (up/down), so I missed that it also worked the wrong way around. Caused very nasty noises on the first test! Realised then that the makers had reversed the Z motor in the firmware, instead of the X, and so I ended up with two motors that went the wrong way!!! Just swap the red and blue wires around on the stepper motor connection plug if it happens to you. Lift the plastic tab on the connector with a craft knife and the connector will pull out.
Other fixes are possible of course.
Thanks for the extra info and glad you've managed to sort it out 👍
Hi Clark .... I know exactly what you are talking about, because I had that same question regarding the X axis bearing. I think I was in the same situation as you a week ago! . Additionally, the Y axis of my machine moves in the reverse direction, I think it is solved by configuration in the driver. In my case the driver was made by Annoy Tools, and it really looks great. Additionally, I think I will have to move the X axis-Y axis set towards the center, since I suppose a zero position in the lower left corner, but it will look different from the photo in the manual !! In conclusion a true DIY project ... but I'm enjoying it! Thanks for posting your experience ... best regards!
@@EfrainRoca Hi Efrain, your board looks more advanced than mine. Spindle upgrade for me next, as mine is sadly lacking in speed. I will connect a relay to the existing spindle wires, and that will switch the new 20000 rpm 775 motor on and off. Power for the new motor will then be from a separate supply, with a PWM speed control. James Dean recommends a similar set up in his upgrade vid, but I think the addition of a relay and speed control will make a big difference. All the best with your projects. No more hand cut inlays soon, as my eyesight isn't getting any better ;) You can see some of my stuff here: ua-cam.com/video/5cDZavyiAnQ/v-deo.html
When I get my 3018-PROVer going I need to find a way to compensate you because you have helped so much
Thank you. Thats always good to hear. There are ways to support the channel in the video description but just knowing the videos help people is what makes me happy
hi james, seems like the 3018 is very popular so i purchased one and just got it together. with your great video i am getting ready to create. thanks :)
Thats good to hear 👍
A big thank you for you good sir for making this video and and the one before. Helped me a lot in assembling and setting up the 3018. Thank you again, from Indonesia.
Glad they helped 👍
You have save my sanity this video is one of the best I have ever seen . THANKS
Thank you 😊
Thanks for recommending UGS platform I'm going to check that out now. I've tried a variety of software so far some basic and some complex, but that one looks like a nice little mix with some UI choices I prefer. I appreciate your honesty toward the end of the video as well. Thanks for a great vid, you've certainly got another subscriber here!
GRBL Panel is also very good
Agree 100%
I agree too, useful honest video 👌🏻
James great videos. Like you, I spent many hours just to complete my first cuts. As you can tell I am an absolute novice but you have inspired me to give it a go. Many thanks
Hey this is super helpful. I just got a 3018 and had no clue where to begin. would love more videos " making your third and fourth cuts..." so on
Thank you. I need to do a new video on using Easel as my current one is out of date 😕
@@JamesDeanDesigns Thanks for this video, very helpfull! About Easel, is it free to use? I am using the trial version now but think it's only free for 1 month? Is there any other alternative that's free and just as easy to use as Easel? thanks for the reply
@@michaelsiebenheller4468 Easel is easy but also a little limited in comparison so some other software. You used to get so many free days a month and then they switched to a one off trial period unfortunately although basic functions are still free. Carbide Create is also free, but in a similar way it holds back its best features for people who pay. Unfortunately good free software is very limited at the minute
@@JamesDeanDesigns I understand... but there isn't any open source (as easy as Easel)? I heard these are free to use?
Great video James. To get into CNC, I bought a 100x100cm Workbee, which came with no spoiler board, no clamps, no software, and a DeWalt quarter inch router that is NOISY! This one seems a lot more beginner friendly. I'm still struggling with clamping a year later.
Thank you. It's still a little noisy but its like comparing a Dremel to a 1/2 inch router, these things are rated at under 100w I believe so not that powerful. Id certainly say this is more forgiving if you make mistakes, and because of its low power you're making lighter passes so its not like your going to take a big chunk out of a piece by mistake.
Thanks James. My 3018 Pro-Max has just arrived and I’m building it tomorrow. I will be following your videos studiously.
I must admit, just looking through the parts, I’m quite impressed. The machine is of all aluminium construction.
Can a laser head be added to this machine, please?
@@hanilove302 Yes, you just remove the motor and fit the laser.
Thank you so much for that end statement... that made me feel so much better, cause my build took me a few days.Thanks to holes being too small on one side frame, plus some bolts too long, mixed in with my big gorilla hands blind eyes and a tonne of swearing. ❤😂❤
Hi James just set up my 3018 pro and found your video’s very helpful thanks
Great news 👍
Subscribed. I just found your channel after buying the upgraded pro-m version with the 7w. Laser. Should be arriving next week. Really enjoying your easy to follow instructions, and hopefully will see much more to come from you!
Thank you. That's really appreciated
@@JamesDeanDesigns what do I do if it says connected in ugs but the jog controller isn’t moving the head on the machine?
What I do to zero the Z-axis is to lower the tool using baby steps until it is just above the workpiece, I then slacken the bit until it drops to the surface and then tighten and register as home, this is a quick and reliable method.
Thats a pretty good idea. I ended up making a Z probe for £1 and its honestly made life so much easier especially when doing a 2 part cut
thanks for this and the words of encouragement at the end, my cnc kit is still in the box, saving this for later, when I plucked up the courage to build it
Good luck, hopefully all goes smooth 👍
@@JamesDeanDesigns it went great, but I'm struggling to understand how to determine size of downloaded cut in comparison to the size of the board as well as where/how to change that size if it is too big and how to change depth of the cut, make sure that software knows top speed of the motor, which drill bit I'm using. The more I delve in the more confused I am!
Tried the UGS finally something worked right for me. Thank you very much. Now I just need to find a g code writer that will work for me.
Glad it helped 👍
Thank you for your easy software setup! I just did the square test and it was perfect. Now to figure out how to create the files myself.
Pretty sure I ordered this with the extension cause of you!!! Very very informative videos!!! Went through the link you had so hopefully you get credit.
That really appreciated, thank you
Best tutorial I’ve seen… so thankful
Thank you for the software recommendation. Dealing with starting points in candle is a pain.
Glad it helped :)
Your last video helped me finish the build now using this to do my first cut!!!
Thanks for this video! Informative and definitely give some good pointers. If you make another one, you may want to talk a little bit more about the clamps and also how to avoid hitting them with the tool. You got a little close on that second square cut!
Thanks for the idea!
Thanks James, followed your instructions, they have been very helpful and i have now made my first cuts. Looking forwards to your other posts. Please keep going.
Informative. I don't have a CNC, but the most terrifying bit looks like getting the zero point right. Especially if you have to change bits.
Thanks, your videos are extremely helpful. It's great to watch how it works while what is being done is explained.
Thank you for these videos.
I've just bought a 3018 and you're guides and tips have really made it easier to get started 👍
Glad they helped 👍
Thank you for making these videos!
Thank the gods for James Dean ! And the other James Dean is pretty cool too ;+}
😆 thank you!
thanks for the video, I have had my 3018pro for about 12 month now and I have only had 1 successful project of it up to yet so I am hoping in your future videos I can see what's been going wrong and how to improve my success rate,,
A million thanks for such a great series of videos, you have helped me immensely! I especially appreciate the reminder to persevere. 👏
This is my next step in the morning, I have a dongle to plug into My Laptop so I assume everything will be on that and could be different to your software ... Great Video ..
They are usually fairly standard files on those sticks, but any issues and you can just download my files
You made this so easy to understand! Thanks very much for the driver files and test file.
Glad it helped 👍
Thank you very much.
I'm again one step in the good direction
BIG THANKS from Copenhagen
Thanks James. I'll plug mine in and see how we go.
I get mine this week! I am really hoping it will do well for shaping hardwood handles for knifes
How is it handling the hardwood at its stock configuration?
@@lunatic231 honestly haven't got a chance to try it ive been deployed on the fires all month lol
@@CuttinChris damn man lol I understand that very well. All the best
Finzllymaxe my first cut! Thanks for your help!
Glad I can help 👍
Thank you for telling me this im gonna get this and this is very helpful to know. I subscribed:)
I had trouble with the table jamming up in Y moves.
I found out when i tightened Y leadscrew up (block underneath) it distorted the table.
I got round this by inserting two pieces of thin card under the block till i got free movement with everything tightened up.
So be prepared for these kind of setbacks..eventually all will be well.
i DId a x-axis thats really the y-axis video with this being the end issue. thx for commenting. basically I also took the drill gun to straightin the 2 mount screws up and down. so I would not need too much oil later. I put the rod in the drill gun chuck and rotated thru the part. but once the machine it jammed like your issue. I need to also try your cardboard trick thanks.. I was getting to do something similiar myself.
@@apkiller10 I've had no more problems since the cardboard cure..i think it was about 15 thou I had to put under..but i guess it would vary for each machine.
@@Mogul25Years yea that part is cheap plastic. but it got me to think about the smoothness of the bottom rails, and if its bending too much. I guess the other variation to fix it is, file down the part if its too big. I have to fix anouther axis soon too, and just got it to sit on bed on top of 4 wood blocks so can take out head without much disassembly. I have a duel monitor attached to back. so my assembly gets messy quick.
Well expanded thanks James 👍
Got to say I got one of these and the hardest part for me was figuring out how to attach the screws to the baseplate.....
Same
... and then overlooking that the spindle holder would crash into one one the clamps during cut.
Lol just spent 30 minutes working out the same.🤔😂🤣
Man.........I can't thank you enough❤❤❤❤
Glad its helped 👍
Thanks you very much bro, i am new on that, you are very halpfull
Glad it helped
James I love your tutorials.
I can't understand why my spindle isn't reaching the wood to carve.
It's hovering over it and following the design but not going down enough to carve.
Hellllppp please
Bit late here, but either the Zero was not set correctly, or the spindle is not sitting low enough in the holder to touch the wood. I hope you have managed to solve it
I am working my way through your video, I have just got the machine and the UGS connected and find the lowest i can get the tip of the cutter from the bed is about ten millimetres. As I intend working on sheet acrylic I now have to resolve this issue!
Just Brilliant ....many thanks 👍
Thanks for your help. Everything went smoothly but I cannot find the Test File
There should be a link in the description to download the zip file, in there will be a folder called test file if I remember correctly
@@JamesDeanDesigns Thank you found it.
Video was a huge help! Thanks!
I just purchased a 3018 and have found your channel to be extremely helpful. I'm having one issue that I can't seem to figure out. I'm sure it is something simple. Maybe you can help. I'm using Easel to design and UGS to cut per your recommendation because I have some internet connectivity issues in my shop. When I open the G-code in UGS after I've downloaded it from Easel, the size of the workpiece is dramatically smaller in the visualizer than the dimensions I entered into Easel. For example, I enter 177 by 165 in Easel. It opens in UGS as ~144 by 132. I've tried changing the units to inches with no luck. I've tried running it as is and it only cuts the portion seen in the visualizer. Your thoughts on this issue would be greatly appreciated.
Hi James
Just bought a 3018s cnc .got everything set up ,but how do i generate a grbl code for first cut. (I am a spanner jockey so this is all new to me. Cheers Steve
You need some design software. Easel is considered one of the easiest to start with although a lot of people move away from it once they get some confidence.
These videos may help
ua-cam.com/video/onFWsPRjy-w/v-deo.html
ua-cam.com/video/EZEropgZ_FY/v-deo.html
ua-cam.com/video/EMI97Rcb0bQ/v-deo.html
@@JamesDeanDesigns Cheers James knew i was missing something😁
hi great video only thing is my machine doesnt move the motor just keep clicking and not moving any advice would be great thanks gaz.
The end comments says all... The software that arrived is not compatible and theres a lot of issues to understand how it all works. Thanks for the very easy-to-follow tutorial...
Excellent videos, which direction should the spindle turn clockwise or anticlockwise? no marking on my motor
Great info James.
I am having trouble with my job paths running off on my 3018 pro. The zero is shifting 10-15mm on the y axis only part way through a job. Do you have any ideas why this could be?
ThanksCbris
Hi James.. I found your videos easy to follow and they got me started with the laser. However I'm not having the same success with the router.
I've downloaded UGS, but it must be be my OCD or something but I can't get past the fact that your software looks different. I would love to be able to see a grid of the work area just like Yours, but doesn't matter what I seem to do, I cannot find this feature in UGS.
How do I setup UGS? Thanks
Hi James
I got the 1318 pro. I'm new the cnc world but I haven't been able to get the ugs platform
You can use Candle or Openbuilds Controller as well. My preference is just UGS. There download site has been a bit temperamental recently but I think it is back up and running now
thanks for the video really helpful!
how do I make the safe zero higher ?please as got the cut but also cut line
Thanks James! Do you have a video on how to know exactly where your starting point will be? I've got some shaped pieces that I'm wanting to carve into and I cant see how to make sure it's going to start carving in an exact spot. Make sense? Thanks!
Jay
Thanks for the video James. Could you do a similar test but with complex curves, like text, to see if it can handle it?
Hoping to do a 3.5 episode with a bit more detail but been struggling to find time. Will try and get it done this weekend 👌
Hi James I have just purchased a sainsmart 3018pro have you any tips for improving the coupler on the pre assembled z axis unit as this came loose and ruined the test piece, the grub screws actually vibrated loose could I use locktite to hold them in also when will we see more videos in your carveco series
Thanks
Pat
Thank so much I was really need it
Glad it helped
Hey James, could you do a video of the actual connecting of the unit to the computer? plus minor trouble shooting when you start the unit up, before actually running a test piece. My 3018 doesn't have readable instructions and what IS in the manual, is in Chinese. So I had no way of determining what is negative or positive. I didn't even know which is the power input, as both my connections are the same size, so silly me, hooked the power cord into the spindle motor, and of course it started spinning... still not sure if its spinning in the right direction anyway. But finally got it hooked and connected, BUT is it supposed to be making a squeaking noise when I move it back and forth? plus, when you say you press the arrow forward, and the table moves backwards.... mine isn't moving backwards, it moves in the direction of the arrow... And I HAVEN'T even done the test piece. lol
Great presentation. Thanks
Thank you
Husband got CNC tito 3018 machine for Christmas! Love the videos! Got the machine built but cannot get driver downloaded? HELP?
If you go to this page, you can download the driver directly from here docs.sainsmart.com/article/3jgtgas880-genmitsu-3018-pro-resources
Hi James,
Thanks for your truly detailed videos. They have helped me to get started with the router.
I love using Easel but had a problem with the cutting depth when trying to cut out a shape (using tabs) and engraving.
The 3018 only cuts 1/3 or less than the specified depth. I cannot get a shape cut out.
I did the same job sending the g-code from Easel to UGS Nightly build platform and it does exactly the same. I cannot get the router to cut to the specified engraving depth, or full depth to cut the job out, despite that the visualizer showing the full depth of cut.
When you watch the progress on the laptop, it shows the depth being increased with each pass till it gets to the specified depth on the screen. In reality it's no where near that depth.
Another question, how do you ensure that the G-code will raise the cutter before starting the job, or must you give it a manual offset by raising the bit before you start the cut?
I have taken the cutter to my preferred staring point and zeroed all axes. When the cut start, it ploughed straight into the job, not raising the cuter first.
Any advise is greatly appreciated.
Did you ever post a video on how to use the laser? A link to this would be very helpful.
Thanks so much for your wonderful videos.
Hi Bruce. First thing I would say is Easel has some known issues with depths and coordinates. So much so that I have now moved away from it since making these videos. I would start by trying another free program such as Carbide Create and just create a simple circle or square and see how that works out. If the issue remains then its almost certains it's something in your machines settings. You might need to do some manual tests, for example if you tell your Z axis to move 20mm does it actually move that far, or is it more like 10mm? The GRBL settings that control this are $100, 101 and 102. Typically they are set at 800 or 1600 but all three should be the same.
In terms of raising the cutter before starting, some software programs this in automatically but others do not. What you can do is set your zero points, then manually raise the spindle by 10mm before pressing play. This is usually what people have to do who use Fusion 360 the export their gcode.
It’s helpful. Could you please explain how to setup the software by laptop?
what type of engraving tools to make pcb?, what degree? (15, 30, or 60°?)
And what type for making masking text?
Is there anyway to get an additional tutorial? I'm having a hard time trying to use the machine for text engraving.
Hmmm. Where did I miss the part where we make some kind of a PHYSICAL connection via USB from a computer to the 3018?? It wasn't in the build video and, although I ca see a blue USB cable at the start of this video I can find no place where any such connection is made. This, even though we were walked through the build at a detail level where we watched zip ties being trimmed. This matters, because my unit has an "offline controller" and that looks like I am supposed to use sneakernet and carry micro SD cards between my computer and the 3018 (which, of course, I would rather not do).
I am sorry if this has been covered but, what software are you using in this video? I am transitioning from laser engraving with LightBurn to using the router head and Lightburn does not support this.
You mentioned quirks in Candle...is one of them not having the machine start at the home setting as set with the software? I have set the position of the head and zeroed out as in the tutorials, but the machine starts cutting where the screen shows the cutter and the head does not move from the set zero position and go to where the screen shown the cutter. Any help you can provide or should I just download and use UGS?
Hey James what bit did you use for this ? trying to get a successful first cut on my 3018 pro.
@James Dean Designs Your video is wonderful and got me started with my first cut! How do I set the depth the blade is cutting? Thank you!
Have to zero the z axis with a homemade or one online from builders and business. There about 8 bucks. With the z axis calibrated you'll be able to set z in the design/tool path then exported to g code.
James, great video. Mc built ok and moves with the offline controller. I cannot download the driver files from the supplied USB stick. Any tips please?
Sorry, but I cannt find this upg platform. I donwloaded the files, but I did not find any excecutable in de .JAR?
if you have a rough cut and design cut do you load both at the same time thanks i got the ugs fixed with the windown thankyou
Hi James. Just set up mine and found out the Z controls are back to front. Push up button and it goes down and push down button the head goes up. Hence the test is backward with the up down.
How to fix this problem.
It will be your $3 GRBL setting that needs to be changed. The settings inverts the different axis directions depending on what number the setting is
@@JamesDeanDesigns thanks JD
I have not been able to get the file with the sample designs you speak about. Can you send me the link to the folder please
Hello 🙂
Do you think you could help me? I've finally set up my CNC 3018, and I'm trying to laser cut. It seems to be functional, the light is on, and my computer recognises the machine.
However, when I try to use the laser from Adobe Illustrator, it can't locate it as a 'printer'. When I try to use GRBL Laser, it SAYS that it's found the machine, but when I run my cut, nothing physically happens, despite the program saying that it's completed the laser cuts.
I'm so confused!
X
What should I use for software with my 3018 CNC if I have a 2019 MacBook Pro?