When It Isn't Supposed to Fit
Вставка
- Опубліковано 30 чер 2024
- In this video, I install a Magura hydraulic clutch, SmartCarb, throttle assembly, and frame guards. From there, I figure out how to mount a 21+ CRF front fender and number plate onto triple camps intended for 2009-2020 plastics. Thanks for following along with the series, I appreciate all of you!
Enter to win the CR250: kincadepavich.com/win/2023-ho...
Donate to support Cameron Niemela's fight against cancer: www.mxrevival.com/product-pag...
Follow me on other social media:
Instagram: / kincadepavich
TikTok: / kincadepavich
Links and Products Discussed:
Pryme MX: www.prymemx.com/?ref=kincade
mXrevival: / @mxrevival
Magura Hydraulic Clutches: magura.com
Smart Carb: smartcarbfuelsystems.com/
Ride Engineering Triple Clamps: ride-engineering.com/
DeCal Works: www.decalmx.com/
MX Plastics: mxplastics.com
Pro-X Racing Parts: www.prymemx.com/?ref=kincade
Hygee Performance Exhaust: www.hyggeperformance.com/
Fast Metric Fasteners: fastmetricfasteners.com
Dirt Tricks Sprockets: dirttricks.com
Warp 9 Wheels: www.warp9racing.com/
Phathead Racing: phatheadracing.com
Want to support the channel? Bookmark this affiliate link to make your purchases on MotoSport:
Music from Epidemic Sounds:
Jaded by Blue Steel
Chapters:
0:00 Hydraulic Clutch
1:00 SmartCarb
2:00 Throttle Assembly
2:39 Frame Guards
3:10 Bar Pad
4:21 Front Fender
6:00 Restyle vs. CRF Comparison
7:49 I Made It Work
9:04 I Had a Better Idea
11:16 Finished Product - Авто та транспорт
FINALLY ANOTHER EPISODE!!
Wishing the best for your friend that has cancer. It’s a rough one. I bought a 2015 kx450f and day after I bought it. I was diagnosed with colon cancer and esophagus cancer. And was told not to ride bikes. Haha. I had my colon removed and now waiting for my esophagus surgery. Love your channel brotha. I. Bought some tickets for this bike raffle.
I’m sorry to hear that my man! I hope surgery goes well for you and you have the opportunity to keep twisting throttle in the future. Thanks for entering for the CR and best of luck. Appreciate the support on the channel, glad you’re enjoying the videos!
Oh fun fact! To make spacers... I've used 1/2 inch pex waterpipe inserted into 1/2 copper collars. Works great.
What’s a copper collar?
Like a 1/2 copper coupling? Like water pipe?
@tightropehikes6994 exactly. For 1/2 copper pipe there are 1/2 inch collars or couplers. The ID of the coupler is 1/2 inch. The OD of 1/2 pex is 1/2 inch.
The 8 or 10 mm bolts pass through the ID of the pex nicely, that and a washer where required makes for a quick and easy spacer. As light if not lighter than aluminum (guessing).
@@danielsimpson8929 just call them couplings plz.
As a plumber I’ve never done that, but I’ll keep that in mind ✌️
Finally had enough extra money to enter. Good luck to everybody. I'm keeping my fingers crossed. The spike is it's gonna be a masterpiece kincade.
Let's gooo good luck!!
Damn!! Even a small video with high quality 👌 thank you sir ride safe can't wait til the next video!
I have the exact same fender and triple clamp issue on a 2004 CR250R. Thanks for the video, this will help a ton!
That thing is going to look awesome I can’t wait to see the finished product
Keep them coming! I love these videos 🎉
Very good custom work mate 👍. I have been waiting for a new CR250 vid for a while.
love this guys energy
Don’t you just love it when you get an email to say you have won lol
deam very great work this build gonna be sick
Cant believe you made us wait less than a weak for anothe episode
Also as a tip i would recommend using antiseize or other grease lubricant when tapping just in case the tap breaks and it helps it tap easier
Bike is coming together very nicely
by far the best cr out there
This build is going to be hard to beat.
This build is looking insane
Great work sir ! Well done 🤟🤙👆
That’s awesome
Can always mount the fender and wheels and unscrew the fork cap and sink the tire all the way up see if it hits...just thinking out loud here haha
I put a 16 fender and number plate on my 2002 stock clamps. The Pryme restyle bracket takes care of the number plate, but the bottom clamp isn’t straight in the middle. It curves out and doesn’t allow the fender to sit back far enough. I would have to cut a big piece out to allow it to come back where I want it.
Hey man huge fan of the build series, you have an exceptional attention to detail! Wanted to ask what your bench grinder/buffer set up is for restoring bolts. Apologies if you went through this in a previous vid
It's the Harbor Freight one! And I use Pryme MX wheels on the buffer side.
great video
Damn she is looking good!!! So are those 815 bikes😉😎
Do the restyle kits work in 4 strokes?
I love the vids
Hype for more episodes on this sweet bike! Unrelated but do you have the name of the tool you used to get the kickstarter off the spline on the KX250 build? Currently in that exact situation
Thanks man! That was a motion pro tire lever haha!
@@KincadePavich Awesome thank you!!! Could not for the life of me figure out what it was lol. Ended up getting mine off with the blow torch and a gear puller of all things but honestly that tire lever might end up in my mailbox anyways because ive been needing some.
New Subcreber Sir🙋🇵🇭
You may remember my previous comment about how you inspired me to revive my 1993 yz250. I got it running probably just as good as it did 30 years ago and I'm starting to freshen it up now. It's got gold protaper bars and I need to take it to a cleaning wheel to get imperfections and scratches out. What paint would you use to repaint it? I'd like to stick to gold, thanks in advance.
VHT/DupliColor are good paint options!
I just picked up a 2002 KX 65 with the number 111. Coincidence?
hey so if i go to buy entries and win hopfully !, where abouts are u located state wise ? im Canadian and would like to know how far i would drive to pick up ? gunna buy at least 10, so it would be amazing to know thank u :), keep making the amazing vids !
I will deliver or ship the bike! You could pick it up too. I live in Bozeman, Montana! Thanks for the support.
Frame guarda mark?
👍👍👍
Use the pro taper cover
Where can i found the hydraulic clutch?
Motosport, Rocky Mountain!
No. You Rock
Hi at the 6,20 u show 2 front fender, i want buy the front fender show at the LEFT but i'not sure for type anf model for fit on my crf 450x 2015 (the triple clamp is original honda) anyone has a link ? is UFO or acerbis or original years ? tk for info!
The one on the left is the Polisport restyle front fender from the latest gen kit. I don't think it will fit a 2015 CRF450X.
I have already buy triple clamp down original years cross model ( i have enduro).... and fender ftont polisport but not fix all
Is this and a give away and if so when does it end
Yes it’s a giveaway! All the details are on my website to get yourself entered! kincadepavich.com/win/2023-honda-cr250/
I would love to buy a bike from you.
What’s up brotha
You're are so handsome man❤
Thanks bro ❤️
No mai
Con guerra e u piccoli
🙋❤👍🇵🇭🤗
shes lookin 🥵