I was utterly amazed by thinking how much dexterity and ingenuity were needed to complete this job. I actually couldn't help but hold my breath while Sorin was grinding thin FPC cable with a growling dremel. Your mottainai spirit made another customer happy. Salute from Japan.
That was very intense fixing that flex ribbon, and seeing the picture come up immediately after. My family here were wondering why I was cheering and clapping watching a vid. Well done Sorin.
the idea is that the repair needs to be cheaper than the whole device, because it wont make economical sense to do it. the guys that will tell new screen actually arent repairmans but just parts swappers
15:15) Hello. For this type of work, I cut the plastic diffusers used in LED televisions that are placed between the backlight and the panel to credit card size. They are barely 1mm thick. They are quite resistant and in this way when inserting them to remove the screen to be replaced, we avoid pinching said screen with the possibility of breaking it. That tool I see is fine, for removing stuck batteries, but on a screen, such as this one that offers resistance (since it is still very stuck), the possibility of you prying with the tool and breaking the screen is very high. I knew you would use a dremmel, that's what I would do. No risk, no glory. Who said fear!! 🤪 (28:15) mini drill taking a forceful beating off camera The knocks only work on televisions when the analog antenna signal was bad and cannot be extrapolated to other devices 🤣🤣🤣
Mr Sorin, you have mastered the art of applying the proper calibrated wire in the most difficult places. Oh teach us grand wire master🙏 No seriously you make it look so easy, but that must be proper hard to do. You truly are a master at your trade🦾
Sorin, you're a legend! I'm also from a poor country and have the same affliction of being unable to throw away electronics that are fixable, but I'm nowhere near your level with repairs. I've got a no-screen detected laptop, and I know everything but the screen works because this laptop is already on its secon screen and I kept around the previous broken screen that has a bunch of lines through it and black splotches, but there's picture. Now I just need to figure out what's wrong with the other screen that had been working perfectly until a week ago. I kept looking around and couldn't find anyone else trying to repair the screen control board, but then 3 night ago I finally found you. Been catching up on your screen repair videos every night - you continually give me inspiration (and knowledge, and hope). Thank you.
I thoroughly enjoy watching your vids Sorin. I love fixing electronics as a hobby and came across your channel and I enjoy your repairs. My favorite is hearing, and we have picture!! Or Thass sick! 😁 Keep up the great content Sorin.
wow just wow !!! im from Ethiopian and i have been watching you for the last 2 month i my self is a Technician in Lenovo service provider But you gave me many skills i didn't get for the last 10+ years in this line of duty .... just thank you keep it up pls don't stop spreading your skills and knowledge if i have money i will pay for each videos (God bless you)
Wanted to say this one impressed me. Most would have abandoned the job when they saw the broken ribbon on the LCD. Good job on your part using that ‘properly calibrated wires’ and certified hot glue for the job.
LOL I can't believe you of all people wanted to buy a replacement tool because it was broken rather than just assuming you can fix it as we all know, Sorin can fix (nearly) everything!! Car Boot Sales are brilliant by the way :)
This is what I will call the unthinkable kind of repair one will hesitate to do at first, considering the risk and time and effort to do it. Amazing video repair by the ONE AND ONLY MASTER SORIN.. Two Thumbs up for you Sorin..
my great respect! I´m also from the eastern block, so I agree that everything should be repaired if possible, before an expensive change for new. Keep up with the perfect work! greetings: Benedikt
That was fascinating and scary to watch! Even the grinder didn't want to be involved in Sorin's scary dodgy repair and desoldered itself😁😁. Funny thing is I kept finding myself blowing on the screen to try and remove the ground bits off the repair section like I was the one doing the repair😂😂 force of habit Awesome work Sorin!! 👏👏
Sorin, you are the one and only one. This is a repair who never did. Like a chipseth replacement with a hot air soldering machine. Muster is the word that will explain your work. Keep your way of work. We are here because of your unique working methods. Thanks
You sir, are my hero. Back in the '90s I had to quit my EE job because of my declining eyesight. We didn't have microscopes back then, and smt technology was the relatively new form of witchcraft. I wouldn't have touched that job with a ten foot pole, with a rubber glove attached to the end. That was brilliant repair work.
Bravo Sorin! A spectacular repair and a joy to behold! I salute your tenacity. I salute your ingenuity and I salute you! Thank you for sharing the pain and the pleasure!
Simply amazing! Nobody in their right mind would think to do what you just did. You sir are an adventurer and an inventive genius... Thank you so much for sharing.
Salutari din Statele Unite domnule Sorin. Apreciez lectiile care ni le impartisiti pe UA-cam. Imi place tecnologia si ma bucur ca pot invata de la dumneavoastra.
Thank you Sorin, I now know how to repair a ribbon cable. I have one to fix on Jaguar CD Changer to do. I've been thinking about how I was going to do this for the past few months. I've only just started to watch you in the last six months and have learned so much more, to the point that I want to go back to repair computers again after a break of 10 years...
It is a jammy customer very guarded about the issues and probably knew a lot about this laptop or just bought it for repair and did not have a clue. Sorin you are amazing.
While thinking, it is difficult to do, at the same time as wanting to do it. And then everything goes well. I felt this pleasure while watching. Another great job Master!
£600 for the screen? Your labour, expertise and materials for you to charge. The thing is only worth £300 2nd hand. Why bother as a customer? Stunning repair Sorin.
Wow! Just wow! I think you just won the triple gold star award for going way above and beyond on this one. I'm constantly amazed at some of the things you persevere with and fix where others would just give up. Brilliant work. That laptop owner should be super grateful.
This was an awesome repair! Very satisfying to watch, I know the happiness when you saw it working made up for the time it took to fix, also it was a challenge. Good motivators to like this line of work ;)
22:20 you can remove this shields with tin the sides and then moving soldering iron with big tip from top of the shield. Also you can use 58°C or 80°C low-melt solder sticks and flux on the sides of the shield❤
Super réparation de nappe très difficile souvent a réparer car la nappe souvent ce fond sous la chaleur du fer a souder!!!Great tablecloth repair, very difficult to repair because the tablecloth often melts under the heat of the soldering iron!!!
I was utterly amazed by thinking how much dexterity and ingenuity were needed to complete this job. I actually couldn't help but hold my breath while Sorin was grinding thin FPC cable with a growling dremel. Your mottainai spirit made another customer happy. Salute from Japan.
Can't deny, that was a proper solid money saving wholesome repair.
The legend himself.
That was very intense fixing that flex ribbon, and seeing the picture come up immediately after. My family here were wondering why I was cheering and clapping watching a vid.
Well done Sorin.
Oh yeah same with me here 😅
And I thought action movies could get tense... Im on your side there.
Sorin , most repairers would not have bothered and tell customer new screen. needed.Well done so talented
the idea is that the repair needs to be cheaper than the whole device, because it wont make economical sense to do it. the guys that will tell new screen actually arent repairmans but just parts swappers
Who`s the number one master? I cant hear........
I think this is the best repair of the month.
Well done boss Sorin !
LOL grinding through the tin plate.. that's hard core man! Well done.
This guy is insane..... the balls it takes to do a repair like this... i salute you
Proper man has fixed it with proper calibrated wire.
It's a long video but worth every second of it
15:15) Hello. For this type of work, I cut the plastic diffusers used in LED televisions that are placed between the backlight and the panel to credit card size. They are barely 1mm thick. They are quite resistant and in this way when inserting them to remove the screen to be replaced, we avoid pinching said screen with the possibility of breaking it. That tool I see is fine, for removing stuck batteries, but on a screen, such as this one that offers resistance (since it is still very stuck), the possibility of you prying with the tool and breaking the screen is very high.
I knew you would use a dremmel, that's what I would do. No risk, no glory. Who said fear!! 🤪
(28:15) mini drill taking a forceful beating off camera
The knocks only work on televisions when the analog antenna signal was bad and cannot be extrapolated to other devices 🤣🤣🤣
Good idea
Mr Sorin, you have mastered the art of applying the proper calibrated wire in the most difficult places. Oh teach us grand wire master🙏 No seriously you make it look so easy, but that must be proper hard to do. You truly are a master at your trade🦾
Sorin, you're a legend! I'm also from a poor country and have the same affliction of being unable to throw away electronics that are fixable, but I'm nowhere near your level with repairs.
I've got a no-screen detected laptop, and I know everything but the screen works because this laptop is already on its secon screen and I kept around the previous broken screen that has a bunch of lines through it and black splotches, but there's picture. Now I just need to figure out what's wrong with the other screen that had been working perfectly until a week ago. I kept looking around and couldn't find anyone else trying to repair the screen control board, but then 3 night ago I finally found you. Been catching up on your screen repair videos every night - you continually give me inspiration (and knowledge, and hope). Thank you.
I thoroughly enjoy watching your vids Sorin.
I love fixing electronics as a hobby and came across your channel and I enjoy your repairs.
My favorite is hearing, and we have picture!! Or Thass sick! 😁
Keep up the great content Sorin.
The patience for fix this kind a job is amazing, for me i will swear a lot while doing LOL
wow just wow !!! im from Ethiopian and i have been watching you for the last 2 month i my self is a Technician in Lenovo service provider But you gave me many skills i didn't get for the last 10+ years in this line of duty .... just thank you keep it up pls don't stop spreading your skills and knowledge if i have money i will pay for each videos (God bless you)
Amazing repair, say what you like about Sorin, but, that was a Jedi master repair….10 out of 10! You are the man!
Wanted to say this one impressed me. Most would have abandoned the job when they saw the broken ribbon on the LCD. Good job on your part using that ‘properly calibrated wires’ and certified hot glue for the job.
LOL I can't believe you of all people wanted to buy a replacement tool because it was broken rather than just assuming you can fix it as we all know, Sorin can fix (nearly) everything!! Car Boot Sales are brilliant by the way :)
Sorin, you had to fix the dremel in order to fix expensive touchscreen. You are unstoppable!🚀
This is what I will call the unthinkable kind of repair one will hesitate to do at first, considering the risk and time and effort to do it. Amazing video repair by the ONE AND ONLY MASTER SORIN.. Two Thumbs up for you Sorin..
Sorry I can't give more likes. That was one of the most breathtaking jobs, unbelievable craftsmanship and skills.
I didn't think the screen ribbon could be repaired, but with the right tools, miracles can happen, well done.
Or you can be dodgy and route a wire directly from connector instead of ribbon L part. Or even to a point in a screen where the ribbon leads to
my great respect! I´m also from the eastern block, so I agree that everything should be repaired if possible, before an expensive change for new. Keep up with the perfect work!
greetings: Benedikt
This man need an stand ovation
That was fascinating and scary to watch! Even the grinder didn't want to be involved in Sorin's scary dodgy repair and desoldered itself😁😁.
Funny thing is I kept finding myself blowing on the screen to try and remove the ground bits off the repair section like I was the one doing the repair😂😂 force of habit
Awesome work Sorin!! 👏👏
wow sorin this is a crazy repair, my hands are sweating when you was using the tool
That´s a proper surgeon job... Amazing...
Customer got a huge bargain bringing it to Sorin’s repair shop. Also love that we got 2 repairs this video. Sorin is spoiling us in this one
Sorin, you are the one and only one. This is a repair who never did. Like a chipseth replacement with a hot air soldering machine. Muster is the word that will explain your work. Keep your way of work. We are here because of your unique working methods. Thanks
You sir, are my hero. Back in the '90s I had to quit my EE job because of my declining eyesight. We didn't have microscopes back then, and smt technology was the relatively new form of witchcraft.
I wouldn't have touched that job with a ten foot pole, with a rubber glove attached to the end.
That was brilliant repair work.
Bravo Sorin! A spectacular repair and a joy to behold! I salute your tenacity. I salute your ingenuity and I salute you! Thank you for sharing the pain and the pleasure!
Simply amazing! Nobody in their right mind would think to do what you just did. You sir are an adventurer and an inventive genius... Thank you so much for sharing.
That's those kind of repairs i'd like to watch , proper calibrated repair , thanks for the repair video 🎉 🍕🍕🍕👍
Jaw dropping work sorin, i think you are doing extremely difficult jobs easily because you are very calm always.
I have been watching this Channel since 2019 and Sir, you still never cease to amaze me. Awesome stuff right there.
Salutari din Statele Unite domnule Sorin. Apreciez lectiile care ni le impartisiti pe UA-cam. Imi place tecnologia si ma bucur ca pot invata de la dumneavoastra.
Thank you Sorin, I now know how to repair a ribbon cable. I have one to fix on Jaguar CD Changer to do. I've been thinking about how I was going to do this for the past few months. I've only just started to watch you in the last six months and have learned so much more, to the point that I want to go back to repair computers again after a break of 10 years...
It is a jammy customer very guarded about the issues and probably knew a lot about this laptop or just bought it for repair and did not have a clue. Sorin you are amazing.
This isn't a repair job.
This is art!
I can't believe it - you brought it back from the dead. Your customers should appreciate the level of genius brought to bear on their behalf!
Well done, hope the customer appreciates it. Fantastic repair.
Bold, wise, perseverant, best master. Most of us would not tried that. 🎉
I would do the same, but I would definitely break the screen. Well done Sorin!
sorin you are the only one who repair all electronics
that is a insane repair
This repair took a lot of risk and perseverance. Hat down ! No risk no gain 🤘
When your Battery is Bigger than Whole Motherboard..This a MasterClass...Video
While thinking, it is difficult to do, at the same time as wanting to do it. And then everything goes well. I felt this pleasure while watching. Another great job Master!
Hello. I saw your video. This is not called a repair but a miracle!!! Congratulations.
That was a proper calibrated SORIN ONLY job.
Hats off to the Κing of dodgy.
This video deserves 10 thumbs up!
btw you can buy rubbery dremel bits. Much better instead of the rigid ones.
We have p... backlight!!! Awesome repair. This scenario most of techninican would given up. Perfect example of thinking outside of the box
I swear , when you were drilling the back of the 600$ screen , i was with my hands on my head and holding my breath..... You are the master of repairs
WOW!!! You made a customer very happy......
£600 for the screen? Your labour, expertise and materials for you to charge. The thing is only worth £300 2nd hand. Why bother as a customer? Stunning repair Sorin.
When İ saw the problem, İ said this time Sorin couldn''t fix it. After that, Sorin''s fix was truly magic.
I had the same issue with the same model today and just followed your steps, and it was fixed.
Thanks very much ❤
Wow! Just wow! I think you just won the triple gold star award for going way above and beyond on this one. I'm constantly amazed at some of the things you persevere with and fix where others would just give up. Brilliant work. That laptop owner should be super grateful.
Top man Sorin. There are very few repairers with the skill and patience needed for a job like this.
Sorin All I can say my friend is. Dam those are some skills right there ..! A true grand master of electronics repair 🤔
I'm taking my hat off. Well done, Sorin! 😊
with 100% certainty, at least 97% of repair shops would've given up on trying to repair the cable and just buy another screen
Proper nice repair
Your fine motor skills are proper amazing. This thingy had 8 wires on area smaller than your index finger. Proper amazing job!
It was a God level repair, with a proper calibrated flat cable :).
Nice job!
Wow, that was proper nice repair! Perfect job!
No word to says just amazing how Sorin handle this broken cable very well
Why doesn't UA-cam have a "double like" button!!
Unbelievable, Sorin you are an artist!
You taught me how to fix a broken flat cable!
Thank you very much!
hands up for this man... i would call this an impossible job... AMAZING..
Incredibly skillful job Sorin. Top class.
Excellent video 👍 The Great Wizard Sorin Does it again 👏
That's a Crazy Repair. Amazing job Sorin.
Masterpiece repair. This goes in the best 10.
It's never to long watching you work your magic.
I was there every second living it. Nice. Bravo Sorin!
Two repairs for the price of one! Incredible repair Sorin. You truly are the master.
Sorine, esti de toata groaza!
Holy shittt 😳. Only Sorin could pull this off.
Fantastic job Sorin ,I can't believe , you are the best.
This was an awesome repair! Very satisfying to watch, I know the happiness when you saw it working made up for the time it took to fix, also it was a challenge. Good motivators to like this line of work ;)
You are absolutely right when you say how painful it is to see especially when from a poor country, you know the score
I must admit, i give you this one. You are an insane expert lol! Thank's!
Wow!!! Proper amazing repair and big save for the costumer!!! 💪🏻👏🏻👏🏻
Best tutor. Thanks for sharing. Love from Nigeria 🇳🇬
Great to see a master at work.
I am watching you removing the screen and I said, "Oh, he cracked it". Then I realized it was an old scratch on this cheap monitor. Well done.
Than you for being so good to your customers.
Wow... just wow.. Well done Sorin.
Sorin, your a star ⭐. That was one difficult repair which was just fascinating to watch. Proper repair that was "purrfect". Well done you 👍
22:20 you can remove this shields with tin the sides and then moving soldering iron with big tip from top of the shield.
Also you can use 58°C or 80°C low-melt solder sticks and flux on the sides of the shield❤
Great Job Sorin.... I am speechless... 👍👍👍
I have no words...this is your masterpiece! A true Unbeatable Genius...regards from Italy.
Dang I love this channel!!!!!
Sorin you are a doctor surgeon 😊
Bravo Sorin, simteam durerea cand lipeai cablul flex !
Well done!!
You are amazing, I Love your vídeos,and repair.
You are a proper calibrated man
Best Sir, You are a true Wizard! Amazing job!
Super réparation de nappe très difficile souvent a réparer car la nappe souvent ce fond sous la chaleur du fer a souder!!!Great tablecloth repair, very difficult to repair because the tablecloth often melts under the heat of the soldering iron!!!