Great video. We all appreciate your attention to detail and the annoying Beemer design quirks that make the job difficult or potentially dangerous. Great instructional video. Thanks!!
Thank you for watching our channel. Hope you have already subscribed to it. We appreciate your feedback. Feel free to share our channel with anyone that could benefit from it.
Thank you for this DIY video. I have a 2005 325ci and the bumper is offset about an inch on both ends. your info will definitely be helpful to me. it looks as if different people have tried to repair the bumper with zipties and bolts before i bought it, which have failed. is there a plastic epoxy or something i could use to repair and possibly utilize these?
Good video, except for the fog light removal. Just remove the two Philips screws at the bottom of the light assembly, and just pull it down and out, and disconnect the wires. The pushpin at the top secures the plastic mounting bracket at the top, and the light assembly just pushes into the rubber vent which is held in place by the plastic bracket.
i just got a 2003 bmw 325i sedan for my wife. The lower part of the front bumper (the grill that runsnigga along the bottom) is damaged and i want to replace it. Is it seperate from the main bumper cover or is it all one part?
I want to remove the front panel as well. I was told there is a way to slide the entire front panel out with the lights still attached. Do you know how to do this?
my front bumper sags where the hood and bumper seam together.. I does not have the metal bracket inside.. I was thinking it needs that metal bracket in side the bumper to make it stop sagging am I correct?
My outside temperature gauge is broken and reads that the weather is +122 and goes back down to -40 it's really weird but could you please make a video on how to replace the wire?! I own a 325 ci 2001
Pablo Lopez Seems like your ambient temp sensor and connector got broken off. You need to buy another ambient temp sensor with a wire connector, then you can solder the two wires together. We have ambient sensors with about 5" of wire available in our webiste www.bimmermerchant.com
So basically, whole bumper is holding by 2 long torex bolts (after all that plastic removing before) Right side of my front bumper is fell down for 1 centimeter for some reason, so I need to put it back up somehow
The most thorough video on removing the bumper I've seen, thank you very much
Bro you have no idea how much you’ve helped me with my bmw man.😂 thanks
Great video. We all appreciate your attention to detail and the annoying Beemer design quirks that make the job difficult or potentially dangerous. Great instructional video. Thanks!!
Very helpful!!
Thank you for watching our channel. Hope you have already subscribed to it. We appreciate your feedback. Feel free to share our channel with anyone that could benefit from it.
Hey bro , big thanks to the way to how you show locations and methods of removal, helps heaps.
It's not the bumper cover in the video heading, definitely not a 2004 330ci bmw bumper cover
Thanks for watching. Not sure what you mean. It is a Front bumper cover removal.
Great video. Thanks for making it. Really super helpful.
Thank you for this DIY video. I have a 2005 325ci and the bumper is offset about an inch on both ends. your info will definitely be helpful to me. it looks as if different people have tried to repair the bumper with zipties and bolts before i bought it, which have failed. is there a plastic epoxy or something i could use to repair and possibly utilize these?
awesome video; very detailed and easy to understand. thank u
Thanks. Please visit our website for all your pre-owned bmw parts www.bimmermerchant.com
Good video, except for the fog light removal. Just remove the two Philips screws at the bottom of the light assembly, and just pull it down and out, and disconnect the wires. The pushpin at the top secures the plastic mounting bracket at the top, and the light assembly just pushes into the rubber vent which is held in place by the plastic bracket.
Great video. Thank you very much!!!!!
I have a 330 Ci and I am going to your web for parts right now....
Miguel Tambucho Thats awesome. Thanks
Damn this video is so detailed, thank you!
i just got a 2003 bmw 325i sedan for my wife. The lower part of the front bumper (the grill that runsnigga along the bottom) is damaged and i want to replace it. Is it seperate from the main bumper cover or is it all one part?
i want to say good job and the video's are very helpfull even for a woman :)
hahaha...Thank you.
I want to remove the front panel as well. I was told there is a way to slide the entire front panel out with the lights still attached. Do you know how to do this?
Nice, very well detailed tutorial.
Thanks
www.bimmermerchant.com
excellent video!
good video Will 👌👌👌
Thanks Mike.
my front bumper sags where the hood and bumper seam together.. I does not have the metal bracket inside.. I was thinking it needs that metal bracket in side the bumper to make it stop sagging am I correct?
bmworld would like to have that bumper you took of in the demo, same color too,that silver! The same one. How do I get it?
thanks you for this video man
Glad we could help. Be sure to check out our website for all your pre-owned bmw parts www.bimmermerchant.com
Hi,
How do you attach an M3 style bumper cover to a 2004 325 Ci?
Your videos are very helpful.
Thanks
Do u need to remove headlights first?
No, you don't have to removed headlights to remove front bumper
8
tanks👍👍👍👍👍
Is it the same on a 2001 e46 coupe and 2003 coupe ,thanks
sure is
My outside temperature gauge is broken and reads that the weather is +122 and goes back down to -40 it's really weird but could you please make a video on how to replace the wire?!
I own a 325 ci 2001
Pablo Lopez Seems like your ambient temp sensor and connector got broken off. You need to buy another ambient temp sensor with a wire connector, then you can solder the two wires together. We have ambient sensors with about 5" of wire available in our webiste www.bimmermerchant.com
So basically, whole bumper is holding by 2 long torex bolts (after all that plastic removing before)
Right side of my front bumper is fell down for 1 centimeter for some reason, so I need to put it back up somehow
Does this guy have to say go ahead every 5th word?
Looking for an E46 M3 hood color doesn't matter
This is removing the whole bumper, not the bumper cover as stated!
Never pull out foo!