Brand New Axes "Restoration" | 1M Special
Вставка
- Опубліковано 29 вер 2024
- To celebrate the million subscribers milestone we achieved last week I decided to make once again the project that has been the most successful on my channel:
The only aluminum cast handle hatchet!
This time I went for a pretty different approach compared to lost foam. By reproducing a 3d model of the hatchet head starting from two reference pictures, I made a split pattern that can be used to make a two part mold.
This casting method has many advantages compared to lost foam: it's quicker to make (no need to make the foam pattern everytime and avoids plaster curing time) and can be used over and over without a problem.
For these reasons I decided to challenge myself by making four of the same aluminum handle hatchet. Once the process is dialed in the casting results are very repeatable so I had very minor differences between the four completed hatchets and, to me, that's the best success!
Of course I don't really need four more axes with alumunum handle in my life, so I will keep only one. (The number 3 since I stamped the nuber backwards)
And here is what I want to do with the remeaning three:
- One will be given away to one lucky subsriber, world wide, free shipping. Sign up here:
blackbeardproj...
- One will be given away on my Patreon to show my appreciation to those that really help to keep these videos coming (winner already picked).
- One will go up for auction to hopefully recover cost of materials and shipping for this project. Here:
blackbeardproj...
This is the only batch I will ever make so be sure to join the giveaway!
And if you are wondering the hatchet with aluminum hangle weights 1.2 kg (2.6 lb) while with the wooden handle it's about 0.83 kg (1.8 lb).
Index of operation and materials:
0:41 Grinding paint off and smoothing with flap disk on angle grinder
1:04 Hand sanding to uniform the scratch pattern. Up to 220 grit
1:31 Design head and pattern 3d model in Fusion 360
2:44 3d printing in pla with CR-10s
3:00 Assemble the pattern with ca glue, pins are printed at 97% to cout for press fit allowance
3:37 Baby powder used as mold release
3:41 Petrobond sand (specific oil bonded sand made for metal casting)
6:06 Cutting infeed and outfeed with a tubing
6:37 Risers to increase static pressure inside the mold
6:51 Melting aluminum in coal foundry
7:06 Degassing with sodium carbonate
7:18 Removing impurities with a specific aluminum flux
8:20 Metal cutting bandsaw
8:55 Refining the shape with rasp and file
9:20 Steel chisel to easily clean flashing around the head
9:31 Orbital sander from 40 to 400 grit
9:50 Hand sanding up to 1200 grit with WD40 as lubrificant
10:09 Polishing on cotton wheel with fine polishing compound
10:29 Cleaning up the edge on 2x72 belt grinder with fine belt
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproje...
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects
Hi everyone! Link to giveaway in video description with plenty other useful information like list of operation and materials used for this project. Cheers!
شكرا لكم على هذه القناه الجميله الرائعه
Mate I can't believe that you reach 1.000.000 subs in such short time. Wow! Congratulations man! I still remember when you had like 75k. You are truly amazing man and your videos are awesome! I wish you all the best brother and I hope that you reach 10M subs in no time!
Best regards from Sweden.
Nexi
P.S. I might get your Axe on ebay :)
great job!
Congratulations, BB.
I like always the movies of this guy perfect 👍🏾👍🏾👍🏾👍🏾👍🏾
This video makes me want to go buy a normal hatchet and change nothing about it
Why?
- godsspeed - cuz they cool
@@-godsspeed-9159 Because these are an abomination.
I'm right there with ya.
Ya somos 2 con ganas de ir a comprar y sin cambiar nadaaa.😉
Хорошо постарался
awesome project, awesome 3d printer and the perfect molding , thanks for these videos
People make a ton of impractical knives nobody would use and this is just like that it looks cool and that's the purpose its not a work tool
But why make something that’s already perfectly good and useful so useless??
@@colinbarnett7441 He bought it, he can do whatever he wants with it. Why are you so concerned with what someone else does with their property? I don't get it.
@@colinbarnett7441 way more logical than people blowing phones and stuff just for lols
Also knifes that are advertised as tough tools but are too thick to cut anything at first place
it would be fine, if these axes looked cool. they dont. they are completely average.
Very good job dude
Love it man
What’s the name of the software used when 3D printing?
*وآللهي ح ـلوو شـغ ـله♥🌚*
Более бесполезной поделки я не видел.
Я бы такой топор не купил. И даже не был бы рад такому подарку.
Браво)
How much for a pair of Axes?
ich weis nicht was der gegen holtz hat aber hammer wie er es macht
Kinda looks cool but wood is a much better handle material
Yeah, why do these even exist?
Explain why?
Wood handle have suspension effect, absorb vibration. Poor wood handle change w metal
@@Boediprasetya exactly
And a metal handle has more weight which makes it harder to carry.
Every time you create a metal handle, God kills a kitten... no, two kittens.
What if it's covered with rubber
@@thanosdione8053 I think that'd be better. I can't see anyone being able to use a plain metal handle for too long because there's virtually no dampening and its usability will vary widely in different weather conditions.
why why why does he always use metal handles
@@bkboggy i mean even a fiberglass handle would be pretty decent doesn't get to hot or cold doesn't rot or rust
He does what he wants
7:48 ooo aluminum muffins. My favourite!
*F.B.I want to know your location*
Looks really good but tastes like metal and it knocked my teeth out
😂😂😂
Деревянная ручка гасит удар, а с этой руки отсохнут минут через 10
@Владимир Большаков понты-с однако требуют жертв(понторезам надо же выпендриться)))
Tienes razón :v
@@ЛенивыйХлебушек а нахуй такой тапор нужен?
@@ЛенивыйХлебушек где здесь можно лютейше плюсануть? Стыдно читать комментарии русских спецов.
Vodka Vodka Vodaka.
Interesting concept and great way to showcase your skills. As a professional axe maker, I wouldn't dream of using an aluminium handle for a good number of reasons. Wood is essential to absorb shock along with being both individual and beautiful.
Genuine question: Why do some many baseball teams/leagues use aluminum bats if it has issues with shock absorption?
@@THEbeautifuLIE The reason wood bats are used is to absorb the energy of a more powerful hitter and make the game safer for those in the projected baseball’s path… you kinda proved the point, aluminum is not as shock absorbent as wood. 😂
@@ericpardoe805 I don’t necessarily understand what the “😂” is for. I specified that this was a genuine question.
If the wood is better for absorbing shock, energy, etc, I’m asking why so many kid’s leagues, softball leagues, etc employ aluminum bats. Why doesn’t everyone simply use wood bats exclusively?
@@THEbeautifuLIE For the same reason wooden bats are used in the big leagues, if you had small kids using wooden bats, they’d never hit a homerun.
Quick question how is this a restoration since the axes are new and nothing wrong with them
Oscar Soliz quoth the quotation marks around “restoration” in the title
Hola
Oscar Soliz bro and why would you put a medal handle on it🤣
I fucking agree
Until he gets them
А вот теперь попробуй на морозе -30 пробовать им без перчаток или провод под наприжением перерубить в первом случае руки отморозиш с токой ручкой а вовтором током убьет на мой взгляд он только на стену повешаный как произведение искусства будет пользу приносить смотреть и радоватся красоте и не более того а так задумка хорошая.
Только для красоты отдача сумашедшая будет по аллюминевой ручке.
Так-то да, ладонь держа такую ручку будет потеть, топор будет выскальзывать из рук а из плюсов это ж алюминий, он лёгкий, не заржавеет))) почти вечный
Прямо в точку
И ещё чтоб курице голову отрубить)))
@@ЛенивыйХлебушек а Вы что не русский?
Features:
* YOU CAN THROW IT
* VERY SHINY
* THROWABLE
Hatchets are easier to throw with wooden handles
why?
Weight^
The head being heavy really helps get a spin from my knowledge. But if someone knows more; please inform us
Punime hekuri
Also throwable!
Молодца, ещё стеклянный сделай
vodka.
Очень дельное предложение.
Класныйе топорики
Why an aluminum handle that would vibrate through your hand
also slippery af
@@asura8495 good point
Stupid restor...n
Some people have TOO much money to do nothing with but spend it on New stuff that you then make new again. Nonsense at it's best.
Wow congratulations on 1 million subs! Your channel is growing so fast and it’s well deserved.
А что, нельзя было сразу топорище выбить? Испортил хорошую вещь. Желаю удачи.
Этот маркер - отпилил топорище, потом выбил остальное, дальше можно не смотреть, будет идиотизм
А на хрена. Простых путей они не ищут.
тупой труд
алюминий от ударов топором начнёт деформироваться а топор на топорище - шататся.
И его никак нельзя будет подбить, как на деревяном топорище. Автору просто нехер делать. Потому занимается бесполезной ерундой.
Он не начнет деформироваться. Алюминий гораздо прочнее, чтоб при такой площади соприкосновения расшататься. Скорее топор лопнет
Согласен,от первого бревна слетит и по башке...
@@capaurus аллюминий мягкий относительно стали и в местах нагрузки он будет уплотнятся, освобождая место стали, поспепенно увеличивая пространство между топором и топорищем. Использовать это чудо по назначению ни один нормальный человек не станет.
Эстетическая ценность этого - крайне сомнительна. Такие затраты человекочасов, расходных материалов и килоджоулей тепловой энергии, а что на выходе!?
Даже у самого лояльного эстета это произведение вызовет вопрос "нахуйа?"
@@里瓦列 чтоб было дохуя лайкосов😅
Плюсы - красиво и на этом они кончились. Минусы -ручка удар не гасит, пачкается, в холод к ней прилипнешь, при расшатывании не подобьёшь не расклинишь.
Искусство ради искусства, никакой практической ценности. Ещё и топоры из-за напряжений, возникших при нагреве при заливке алюминия будут лопаться около отверстия для топорища, если ими работать. Ну и руки после работы таким топором придётся долго отмывать от черноты.
Не лопнут однозначно,потому что отпуск полный произойдет.
А вот руки да,чернеть от окислов будут.
@@edi3597 Отпуск может и не произойти, даже скорей всего не произойдет, т.к. ни о каком контроле температуры тут речь не идет.
@@DiVO4271 аа причем здесь контроль температуры?
Алюминий плавится при 600 с чем то..это температура полного отжига.
Медленное охлаждение в форме не даст закалки,соотвественно никакой хрупкости не будет.
So, you ruined the axe's heat treatment just to waste some aluminum.
Привет
Коту делать не чего, он яйца лижет, а дурак алюминиевые топорища.
Dmitriy Kulikov да уж "куплинов”
Это не практично. При рубке будет сильная отдача по рукам
@@artur1057 только хотел это же написать))
Да пускай лучше топоры из олова делает чем гумунколов выращивает 😀
@@ВладимирМинин-р6г согласен, чем бы дитя не тешилось, и руки при деле и возможно мозг в плохую сторону работать не будет.
чувак,ты почему сразу ручку так не вытянул?)
Правильно!
Other restoration videos going from destroyed to new this one going from brand new to destroyed 🤦🏼♂️
Можно было и топор вылить из алюминия, все равно этим не работа, а нормальный топор был-бы жив
"Art should comfort the disturbed and disturb the comfortable."
-- Cesar A. Cruz
Yes art.... That's what we are calling my basement now art
Art ? How the fuck a tool is considered art ? Oh and btw why ruin a perfectly good axe ? To make it look shiny ? For fuck sake...
@Everything's Eventual "what a crappy quote" 🤣
Did anyone else wonder why he didn't just hit the stick out instead of cutting it?
He cut it so could put it in the vice
I thought it was a waste of a good handle
It can't be knocked out as the base of the handle is larger than the eye of the head. All timber handles require cutting for removal unless using a puller to remove the wedge and pin.
He still knocked it out and could have knocked it out with the handle attached if there was space in the vice. Didn't HAVE to be cut down
@@ImBuananaGiven that it was a dirt cheap axe with poor quality handle I don't understand why anyone would keep it. Secondly, the only way to remove an axe handle intact is to 'pull' the circular pin out and the wooden wedge. So, explain to me how 'you'd' do that?
I don't know where you live, but I know axes better than most as I own more than 70 and sell more than 100 vintage axes a year. Quality axes have handles made from Hickory (American) and other selected Hardwoods from Australia and Europe that have correct grain running from toe to heel, or chisel to eye.
Most people know nothing about axes, for those that don't, it's best they not comment at all.
Can we have a video on how to restore your wrist, Cause the impact of using a metal handle will mess them up.
I don't think it will. I was thinking the same thing but then I noticed how the axe head is "discoloured" half way through. So that means that the metal around the eye is much much softer than the cutting edge and that will do the shock absorbing.
Granted it's not a traditional hatchet but it is beautiful and the craftsmanship that went into it makes this more like a show piece than an actual tool, imho.
Michael Cowey there’s an ad for that on all the CrossFit videos.
your most prestige project, 3d printer and CAD,
well made.
My only question is WHY???
Why Not?
Because he could!
Щас бы в минус 40 таким топором работать..испортил хороший инструмент.
Ище 3русский втф
У них там -40 не бывает))
Провод под напряжением не отрубишь теперь
Ты наверное из великой расии?Это у вас там принято провода пиздить под напряжением?
В галошах рубить надо.
I know all abt restorations and i know this isnt really one, but have any if yall know it alls ever sat and thought maybe hes just doing it for looks and cause it looks cool not for the actual use of the axe
А зачем отрезали ручку топора, если потом выбивали со стороны клина?????))))))
Udis и в правду выбивал то со стороны))))
Я чесно говоря очешуел от этого)) Но тут в общем надо смотреть)) может он топор первый раз в руках держал)) а судя по поделке и коментам это скорее правда))
Чтоб ты блять спросил
бесцельно потраченное время и ресурсы, топор с металлическим топорищем тяжелее и ненадежнее топора с деревянной ручкой(
Это алюминий он легкий
Мало того, ещё и сам топор испортил, он теперь из-за возникших напряжений однажды треснет
@@sevdev9374 в 4 раза плотнее березы
@@DiVO4271 оух отпущен, их обычно вообще не калят, до клинка не дошло.
@@_jocker_games_ Лопнет не клинок, а обух. Т плавления алюминия выше температуры отпуска стали, даже при высоком отпуске. Что скорее всего приведет к хрупкости стали.
Sadly all that is, is a polished turd. Cheap hardware hatchet head to start still cheap at the finish. All you did was add a fancy non shock absorbing aluminum handle. God help the hands of the fool foolish enough to use it.
Congratulations!
hopefully you don't gone nide to work hard to get 2 million subs. ❤️😘
r/boneappletea
В чём прикол каждый раз руки будут чернет после работы с этим топором алюминиевый же
В мороз рука замёрзнет
Взял нормальный топор испортил. Сказочный д*****б))
Why not use the original axe as the mold, then remove the handle?
Pouring the handle in, wouldn't it change the hardening of the steel and it would need re-tempered?
It didn't change the edge on the ax light blue is proper hardness for an ax.
Nice work but honestly I like the wooden handle much better, less impact to the user
Красиво! Но только руку отсушивать будет при рубке.
Ага, а ещё рукоять будет в 4 раза тяжелее березовой
Now the quality is great, 1080p and 60fps, nice
😱 Try to work with this aluminum when it is - 25°C outside! And don't forget the vibration too!
نتتتتتتتززننننننننننن) نننننننننن
초 ㅗㅍㅍㅍㅍㅍ
Wow you did Nice on That one 😎👍🇺🇸🍺⛏️🦅🔥💯
Damn so early to be here, only available at 360p lol
I'm so late that i got 1080p 60fps
Алюминиевая ручка не будет руки марать?
А ещё зимой очень тепло будет им работать (:
Этот чел рукастый, но у него фетиш на алюминиевые ручки для инструмента, особенно для топоров. Ему даже в комментах писали, мол, хватит делать алюминиевые ручки. Но ему похер, теперь он сделал ЧЕТЫРЕ топора с алюминиевыми ручками.
В общем, любит он бесполезную херню делать.
Дерево приятней в руках держать
С алюминиевой ручкой рубить больнее.
Только руки отбивать при рубке и чёрные ладошки!
Так это не для рубки! Он с монголами будет воевать. Они опять наступают. Это чтоб монголов из далека херачить.
@@ЛенивыйХлебушек Ты под все посты это копипастишь?
@@ЛенивыйХлебушек И как, хоть кто-то оценил?
Нет.
Вечно скользящее в руках топорище. А еще вечно окисленное и вечно черные руки. Ну разве что лакировать и в сервант. На любителя. :)
Кстати, дедушкин топор, ещё при Николае || кованый из того что под руками было, лихо пашет до сих пор. Хотя металл так себе.
Металл скорее всего не так себе, а очень хороший. Вероятнее всего закален не очень хорошо или отпуск сильной большой. Я перетачивал советский топор 60х годов, потом отжигал в печи с медленным остыванием, потом нагрев и закалка в воде, и отпуск в духовке около часа при 200 градусов, получилось намного лучше, чем было, рубит гвозди без заминов на кромке, по дереву так вообще почти не тупится, можно не точить, только править на пасте
สวยๆ น่าจะทำขายนะ😬😁
Holy crap 1million allready! I`ve been watching your videos from 10k subs. This must bee somekind of diyer record! Congrats man!
Спортил 4 топора, а когда выскользнет из руки, еще и покалечит кого-нибудь, короче глупость ютубовская.
I thought you were going to put the wood handle back on at first jiji
Initally it saddened me just a bit in some strange way to see a perfectly good new axe handle get cut off but Then it was nice to sed the new aluminum one take place that will break and will be good for throwing.
But it’s ne... forget it I wanna see you “restoring” your new car
Aluminum tyres lmao
Wow, this is why I want a home foundry to make some things like this for myself. Just found your channel and subscribed.
Throwing axe attempts were enough to make me sub lol
looks nice but the metal handle will hurt your hand when swinging it hard.. that's why it's wood dude
I hope these are only for decoration because that’s gonna sting when you use them...
*BRuh juST usE 3 IROn inGOts aNd 2 StiCKs*
3:57 *Drumroll please!*
complimenti, 1M meritatissimo, congratulazioni! continua a crescere e produrre
Отличный результат! Красивый топор получился 👍
Проруби топором с металлической ручкой, потом поговорим про "отличный результат"😂
Симпатично, но не практично, люминь руки пачкает, и это металл все же.
Вот у человека 3d принтер
I love it and I am a boy k😡😅
Inspiring work
Спасибо за хороший видеоролик может быть (моё мнение) можно было про перфорировать топорище для облегчения веса.
Сделано хорошо спору нет, но увы не практично в повседневной жизни, из акации лучше. А так молодец что тут такого
Whats the name of 3D program you used?
Got the Same question.
I'm confused, not only can you not restore a new axe because it's not old or used but you destroyed a perfectly fine wooden axe. Why not just get a rusty axe head and start from the grinder step?
какой великолепный,колоссальный и бестолковый труд...
Красиво ! ..... Но СУКА бестолково, повесить на стену и любоваться)))
I like how you don't use music.
Screw the tShirts. I want the aXes !! BadAzz br0. Good worK
Axe designer/manufacturer: oh, is my axe not good enough?
*actually cries instead of taking action*
Demotion time
Awesome very cool and inspiring. Get out there and learn to make something.
Только положить в холодильник и смотреть.
I really like the way the heat treatment to the axe head remains and you didn’t polish it out, fantastic job 👍
Uh you do realize that by casting an aluminum handle for it. This idiot took out what little hardness was actually in the blade edge. That edge might as well be made out of butter as it will never hold an edge.
If you watch the colors of the oxidation, you will see that the edge never exceeded 400F. Witch means that the tempering is intact. Not a fan of the metal handles tho. But cool idea still.
Awesome axes
Theres a reason metal axe handles aren’t a thing you can get cancer from the vibrations
How do you "restore" something that is "new"?
More perfect.. if u gonna to coating with some colour
"Iron or steel is what you need. Leave that fancy Elven stuff to the Elves." - Alvor, Blacksmith
Looks cool! I’ve never used an ax with a metal handle before so i can’t make judgments but i feel like that wouldn’t be comfortable
And you’re correct
Che prodotto è quello utilizzato al minuto 1:04 ? Grazie per la risposta
Wooden handle = comfortable use, metal = harsh
Incredibly satisfying to watch
Dude, your work is unmatched. I love the style you go with. I would like to win one of these, but I'd also like the option to buy if you have a website you sell from.
Hahaha, i want too
Золотые унитазы, алюминиевые топоры, что дальше?
Дальше полный пиздец .
Changing wooden handle to aluminium one, sharpening (incorrectly) is not "restoration".
Когда собаке делать не хрен, она яйца лижет.... так и здесь.
Cool vid! The aluminium handle is interesting, and people more experienced than me with casting know of other drawbacks to it, but it's a cool idea! Keep up the vids dude!
Это очень круто!!))
Что в этом крутого?
@@battleshippotemkin560 а ты сможешь такое сделать?
@@АлександрДоценко-ф9ш Не сможет, просто надо что то сказать. В наше время все меньше людей способных что то сделать своими руками. И все больше тех кто не может этого оценить, в силу того что сами могут только потреблять.
Может и выглядит симпатичненько, но на деле , особенно в холода, такая ручка будет не практичной - скользкой и холодной, да и руки все почернеют от неё. Дерево приятней рукам. Но процесс интересно было смотреть.))
will shock like abitch on my Roster