Thank you Lance. Iam educated as an electro-engineer and has been working as an electrician. I like to tinker with all sorts of airguns etc to see how they work. I struggle a bit with my fingers but I never ruined any of them. Take care and have a great weekend 😃
Loved the vid. Hahah the one left over screw i know the feeling thankfully it wasn’t necessary. Velocity seems much more stable than previously seen with the factory 2x12. I planned to do mine this weekend among other things 😅
Thank you Sean. Yes the velocity was very stable. The 2x12 gram CO2 has a powercurve. Very strange. Now it has great power from the first or second shot. Looking forward to see how yours will perform after you install the new 88 gram housing. Bet it will be the same as mine. Good luck with the work. Take care and have a great weekend 😃
Nice power Rune, when you had the marker opened up i could see some red paint i guess it was paint and not blood i like to think its paint ,because tin cans were out for blood last night 🏴🇧🇻😀
Imagine what a 120 gram CO2 could do lol is 90 gram the highest? I guess any higher and the marker will literally "freeze" lol I prefer CO2 over anything else ..seems like you get more power from those 90grams...but what do I know lol only been doing this for 2 months lol but have watched a ton of videos.
In my earlyer years I played paintball with bulk fill CO2. Dont remember how much CO2 it would hold but it lasted a very long time when playing.@@JoulesElite
🎉🎉sempre complimenti per il tes interessante Naturalmente questa per me è l'arma t4e più bella in assoluto...kissa fino a quanto si può potenziare al max von CO2 88gr o hPa 1200 psi😂 Però dovresti provare a fare entrare il calcio nella bombola ,facendo rimanere fuori,soltanto l' asa on-off Poiché esteticamente e il caricamento a pompa è Fantastico 🎉🎉!!!
Thank you my friend🙏. Yes it will look much better if I only screwed the 88 gram tank right into the marker👍. Its a super cool marker that hits hard. Cheers my friend👍 😃
No problem my friend. Iam glad to help. You need the adapter from 88 gram CO2 to HPA. You can use a similar type as I have been using in the video. Homedefence-24 sells this adapter also.@@michaelhan9902
Hi Rune, You have very educative videos, thank you for that!!! I have only one question. How many joules you think is minimum to stop attacker, for self defense? I have HDR50, and i dont know how many is joules is enough? Removed Valve block, drilled hole on disc to 1,5mm, changed barel with longer, z extension, pin changed to 7mm Thank you for answer in advance!!!
Thank you my friend. I think 15 joule is a minimum but the more the better. It also depends on where you hit and how much clothes they have on. Sounds like your HDR50 with the longer barrel and Z.ram valve extention plus drilled restrictor is some of the best you can have. Think you will get between 30-40 joule from it. Depending on temperature and ammo. Take care and happy shooting. Greetings from Norway 😃
Hi, did you finally tried HPA? I have the same pressure housing and I already tried HPA via adapter but I noticed significant power drop on HPA. No matter if I use 1100PSI or 1300PS - the only difference is that the trigger is hard to pull.
Hi. Yes I tested it with both 800 PSI and 1100 PSI HPA tanks, but the power was very low, so I dont use HPA in it. I think the thin brass tube between the CO2 housing and valve is the cause for the drop in power.
@runerebel8441 we need an explanation of some physicist why co2 behaviors different traveling thru that brass tube :) What version of valve do you have inside? I tested HPA on 16J version but my 40J version just arrived and I'll try to replace it tomorrow and see if it gives any difference.
@@kamilm2102 I have the 16 joule version. The small brasstube restricts the flow of air and CO2 quite a bit. CO2 gas expands so it still give good power. If there was a way to conect the HPA directly to the valve or change the brass tube to one with a larger hole, then the power should rise 🤔
@@runerebel8441 so it seems that HDB68 is whey better for connecting to HPA cause it's lack of the brass tube. Maybe it would be possible to attach ASA adapter like in HDR50 directly to the valve drilling thru the case..🤔
@@kamilm2102 Yes. The HDB68 is what you want for max power. I think it might be possible to hook the HPA directly to the valve but I have not tested this myself.
Thanks 3:17 is a thing i dont get :| "Remove the small brass restrictor" is only for the 7.5j ? If not, do you remove it permanently with screwdriver or put back in place ? Thanks a lot for any answer :o
Hi my friend. The small brass restrictor sits inside the hole where the brass tube goes. I used a needle to loosen it up and then just tilted the valve upside down so it fell out. The restrictor is not needed for our use. We want max flow of CO2. Dont put it back. All versions have the restrictor. Even the 40 joule version. So whatever version you have you should remove it if you want power. Cheers 😃
@runerebel8441 thanks I was looking on homedefence24 and it said the aluminum balls are for the hdx n hds, will they also shoot well with the hdr68? I didn't see pvc iron balls listed on their website. Do you know where I can purchase those? Thanks for the help 😅
Hi Rune, was your job an engineer before…..I’m impressed how you can take apart and rebuild things so easily….always enjoy watching you tinker😃
Thank you Lance. Iam educated as an electro-engineer and has been working as an electrician. I like to tinker with all sorts of airguns etc to see how they work. I struggle a bit with my fingers but I never ruined any of them. Take care and have a great weekend 😃
Loved the vid. Hahah the one left over screw i know the feeling thankfully it wasn’t necessary. Velocity seems much more stable than previously seen with the factory 2x12. I planned to do mine this weekend among other things 😅
Thank you Sean. Yes the velocity was very stable. The 2x12 gram CO2 has a powercurve. Very strange. Now it has great power from the first or second shot. Looking forward to see how yours will perform after you install the new 88 gram housing. Bet it will be the same as mine. Good luck with the work. Take care and have a great weekend 😃
Wow! 50 joules!! [the on/off is a must] 👍👍
It sure is 👍😃 Great power now😃💥👍 Take care and have a nice weekend 👍
Nice power Rune, when you had the marker opened up i could see some red paint i guess it was paint and not blood i like to think its paint ,because tin cans were out for blood last night 🏴🇧🇻😀
Ps as you can see the England flag has been blanked out
Thank you my friend. Yes. No boold this time. Take care and have a nice weekend 😃
Yes. I noticed. Take care my friend @@Craig59J 😃
Nice video rune I learn something every time appreciate ya
Thank you my friend 😃
@@runerebel8441 I wouldn’t buy one because I always felt it would run better on 88g I’ll grab one now Rune thanks again
Very much enjoyed the test, thanks for the video!
Jesse
Thank you Jesse. Iam glad you like the video. Cheers Rune 😃
Nice modifications nice power 👍🏻
Thanks my friend 😃
Thanks for the shout out!
No problem my friend 😃
Now I want that marker lol thanks for the video ..
Thanks my friend 😃
Imagine what a 120 gram CO2 could do lol is 90 gram the highest? I guess any higher and the marker will literally "freeze" lol I prefer CO2 over anything else ..seems like you get more power from those 90grams...but what do I know lol only been doing this for 2 months lol but have watched a ton of videos.
In my earlyer years I played paintball with bulk fill CO2. Dont remember how much CO2 it would hold but it lasted a very long time when playing.@@JoulesElite
Very nice numbers 😎
Thanks my friend 😃
🎉🎉sempre complimenti per il tes interessante
Naturalmente questa per me è l'arma t4e più bella in assoluto...kissa fino a quanto si può potenziare al max von CO2 88gr o hPa 1200 psi😂
Però dovresti provare a fare entrare il calcio nella bombola ,facendo rimanere fuori,soltanto l' asa on-off
Poiché esteticamente e il caricamento a pompa è Fantastico 🎉🎉!!!
Thank you my friend🙏. Yes it will look much better if I only screwed the 88 gram tank right into the marker👍. Its a super cool marker that hits hard. Cheers my friend👍 😃
Hi Rune, wow nice test. How is the performance of the new adapter using HPA tank? Will it get better joule than 88gr CO2? Thanks in advance.
Hello my friend. I have not tested it with HPA yet. But I think 88 gram CO2 is much more powerful.
Thank you Rune. If i wish to use HPA tank, what adapter should i use to connect to the newly installed 88gr adapter?
No problem my friend. Iam glad to help. You need the adapter from 88 gram CO2 to HPA. You can use a similar type as I have been using in the video. Homedefence-24 sells this adapter also.@@michaelhan9902
Thank you very much, Rune. 😇
Hi Rune,
You have very educative videos, thank you for that!!!
I have only one question.
How many joules you think is minimum to stop attacker, for self defense?
I have HDR50, and i dont know how many is joules is enough?
Removed Valve block, drilled hole on disc to 1,5mm, changed barel with longer, z extension, pin changed to 7mm
Thank you for answer in advance!!!
Thank you my friend. I think 15 joule is a minimum but the more the better. It also depends on where you hit and how much clothes they have on. Sounds like your HDR50 with the longer barrel and Z.ram valve extention plus drilled restrictor is some of the best you can have. Think you will get between 30-40 joule from it. Depending on temperature and ammo. Take care and happy shooting. Greetings from Norway 😃
Hi, did you finally tried HPA? I have the same pressure housing and I already tried HPA via adapter but I noticed significant power drop on HPA. No matter if I use 1100PSI or 1300PS - the only difference is that the trigger is hard to pull.
Hi. Yes I tested it with both 800 PSI and 1100 PSI HPA tanks, but the power was very low, so I dont use HPA in it. I think the thin brass tube between the CO2 housing and valve is the cause for the drop in power.
@runerebel8441 we need an explanation of some physicist why co2 behaviors different traveling thru that brass tube :) What version of valve do you have inside? I tested HPA on 16J version but my 40J version just arrived and I'll try to replace it tomorrow and see if it gives any difference.
@@kamilm2102 I have the 16 joule version. The small brasstube restricts the flow of air and CO2 quite a bit. CO2 gas expands so it still give good power. If there was a way to conect the HPA directly to the valve or change the brass tube to one with a larger hole, then the power should rise 🤔
@@runerebel8441 so it seems that HDB68 is whey better for connecting to HPA cause it's lack of the brass tube. Maybe it would be possible to attach ASA adapter like in HDR50 directly to the valve drilling thru the case..🤔
@@kamilm2102 Yes. The HDB68 is what you want for max power. I think it might be possible to hook the HPA directly to the valve but I have not tested this myself.
did you remove the restricter that is connected to the pressure housing?
Yes
Flåklypa Gran Prix, känner du till den filmen Rune? 🤣
Mästerverk från barndomen
Jada. Den har jeg sett mange ganger 😁
Thanks
3:17 is a thing i dont get :|
"Remove the small brass restrictor" is only for the 7.5j ?
If not, do you remove it permanently with screwdriver or put back in place ?
Thanks a lot for any answer :o
Hi my friend. The small brass restrictor sits inside the hole where the brass tube goes. I used a needle to loosen it up and then just tilted the valve upside down so it fell out. The restrictor is not needed for our use. We want max flow of CO2. Dont put it back. All versions have the restrictor. Even the 40 joule version. So whatever version you have you should remove it if you want power. Cheers 😃
Hi Rune, which ammo would you recommend for best impact for the hdx and hdr68?
Hi my friend. The PVC Iron Balls and Aluminium balls should work great in these markers.😃
@runerebel8441 thanks I was looking on homedefence24 and it said the aluminum balls are for the hdx n hds, will they also shoot well with the hdr68? I didn't see pvc iron balls listed on their website. Do you know where I can purchase those? Thanks for the help 😅
Thanks. I got them from the same shop. Maybe they where sold out?@@garethdimmick5985
I didn't get o-rings in mine what gives 😂😂
They are just spare O-rings for the housing. Have you changed the housing yet?
@@runerebel8441 No I hadn't got around to messing with it yet. I find these things fiddly also 😂
Yes they can be very fiddly to work on. Good luck when you open it again 👍@@DKSpencerCustomKinetics