Making a Medieval Leather Belt Chape with No Forge (DIY Leatherworking)
Вставка
- Опубліковано 2 жов 2024
- I came up with a simple DIY solution for the belt chape, an almost lost fashion piece for Medieval Belts. Very easy to make, and cheap too!
Help Support me on Patreon!
/ livinganachronism
Join the Discord: / discord
Instagram: / livinganachronismofficial
Check out Mythology Candles: mythologiecand...
*Links provided may be affiliate, I get a small commission if you use one of them, which helps support me, and the channel, at no additional cost to you!
----
-"Nowhere Land", "Now We Feast", "Tam Lin", "Winter Night", " Wonderland", "Grundar" by Alexander Nakarada | www.serpentsou...
Music promoted by www.free-stock...
Attribution 4.0 International (CC BY 4.0)
creativecommon...
I’m gonna need to put my belt on a diet to keep it in chape
😂😂😂
Tip for silver paint, you always want to start with a black base, ideally glossy as well, it helps bring out that metallic look as opposed to painted silver, at least in my experience, also, a black wash is lovely for weathering, and is far more adjustable in the amount of dirt, and you can mix colors in your wash, also you can dot in rust, and a final dry brush of silver on the outside edges. Hopefully any of that is useful to anyone 😁 also prop maker mind aside, this was a fantastic video, your content has never failed to keep my spirits high good sir
That deco chape definitely adds immediate wow factor to your garb. It doesn't need to be perfect. It just needed to be better than before. Mission accomplished.
Would stress that the contact cement should be on _both_ surfaces, and that it should be allowed to dry for at least around 15 minutes before "assembly". (Also very useful for restoring book bindings where the pages are falling out - A very strong, permanently flexible bond)
1. Commenting for the algorithm
2. Wow😮 that looks so good.
3. When I decide to start figuring out leatherworking this will be the first thing I do, God bless you for your dedication to this channel and the betterment of your viewers.
You know that you did a good job when at the beginning of the video i worried "i don't know if i have tools to work with metal" and it turns out to be leather and paint.
That looks cool👍
Hey.... I MISSED THAT ENDING. Oh hell yes! You are ON!
The end result looked really good. For a quick and cheep look, tin foil works, but like I said cheep look.
I don’t think your leather was damp enough when you tried the Celtic stamps. I have the same set and they are kinds tricky because the details are not very deep. So if it is “jumping” like it looks like what happened it is not damp enough. Also recommend Angelus leather metallic paints I use it on my custom orders with a resolene finish, I use this on my custom orders and it hold up over time even on armor. Great little project and great attention to detail!
Those are exactly the problems I was experiencing. The leather might not have been wet enough I'll give it a try, it might have also been trying to stamp on stacked leather that was providing too much cushion
@@LivingAnachronism Absolutely! I would recommend next stamping it separately then glue and trim.
Very cool finished look, in the beginning of the video I really thought it was a piece of metal that you used.
Awesome
I think belt chapes is due for a comeback, cause its a very stylish look that could definatly work in modern times.
Western style belts have the three piece matching metal set (buckle, keeper and tip). A two piece buckle and chape wouldn't be that far off, and rather stylish too.
You can also buy these (although mostly in brass) from reenactment and larp suppliers. You can get simpler, decent-quality ones for relatively cheap.
Also, yes, bring back belt decoration to modern fashion.
I think I need to rummage through my closet and find my old belts to try this. This looks quite excellent!
I'd love to see this sort of thing finished with maybe some metal foil/leaf!
Looks great brother! It might be a good point to remember that on any kit where your character relies on stealth (like a ranger?) This would break one of the rules of camouflage (shape, shine*, shadow, silhouette, spacing, sound and movement) so might not be used for field kit but more town attire?
Very crafty. Kramer should be an occupational therapist
Since I do paint miniatures i have a couple sugestions for you about making the detail pop up a little better. You can do the paint + wiping technique but it doesn't turns out that well as you've seen, it needs a lot of correction because with wiping it's just innevitable. Here there are a couple options you have available.
The first is being a type of paint called a wash. Washes are paints that are tinned so that they will run into all the crevaces and stick to that, so by using a wash you can simply paint over all the surface area and it will only very slightly darken the base surface in a very organic looking way and will darken the insides significantly. this archieves what you did in 1 pass of the brush with much less work.
Another way is to simply thin the paint yourself and it will do just fine. it's not the same since the composition of the ink is slightly different but it will do the job better than wiping.
Lastly there is a small tip I can give you if you want the whole thing to look even better. You can start with a brown wash and that will simulate a little bit of rust building up in the harder places to clean. Then you come up with a smaller amount of black wash after the brown dries. Now most of it will be black but there will be hints of brown here and there that simulat a little bit of rusting.
You might want to also add a layer over the paint to seal it, even the all weather and similar ones work off over time and you want to protect something that's higher wear
Since you didn't paint the leather first with primer you might want to varnish over the silver paint to prevent it from chipping.
I recommend Vallejo metal varnish.
I’ve always found that tooling gives better and deeper impressions than stamps. I think it has to do with the complexity of the pattern on the stamps and the size being displaced over a larger area.
As someone about to embark on attempting a brass chape for a dagger sheath, this is interesting... and so to is the tag at the end. :)
Two choices for better "metal" look, both from miniature painting. 1 - paint black and then overpaint with silver, but drybrush the silver. 2 - paint silver, and then use a wash instead of full strength acrylic paint. The wash will go into all the crevices and "reverse highight" everything really nicely.
Re stamping, to get good clean stamps you need a non-distorting backer surface. Every time I see folks doing stamping at Tandy they are using a chunk of granite countertop. Also, it will stamp cleaner if you stamp prior to bonding.
Looks great. The only thing I might do differently would be to use brass rivets. The nickel steel ones just look a touch too modern for me, and I think brass would give it just that extra hit of contrast and interest.
😆essentially we said the same thing. With the exception of early paint steps . You get a wash when you water it down
Ive never thought to paint leather after tools or stamping. Thank you for the inspiration
It is a great look. The hand made design does look better than the stamps. Seeing that utility knife next to the plastic straightedge did make me nervous.
I bought a piece of saddle belt leather and made a buckle and chape out of round stock and steel plate
I cast mine in Tin, but could do it in any metal really as i do plaster casts
But i do have a leather tip if you want patterns make sure the leather is wet and in warm water it becomes really soft and easy to make a pattern in let it soak
Check your local larp shop. Mine sells leather scraps for next to nothing ;)
Great video to eat breakfast over
Looks awesome and looks fun!
Great stuff
Nice patina.
Funky cold patina. 😂
Fantastic love your videos you have inspired me lots!
Thank you Samuel!
Nice! I hadn't thought of using leather for those as every time I see them they're made of various metals. Crafting them out of leather actually makes them a lot more accessible.
came here form Shad/Kramer "witcher fighting styles" video and immediately subscribed. damn, this guy is cool!
Thank you! Welcome to the channel!
I think those stamps didnt do much because there are 2 layers of leather below the layer you're stamping. It's probably just smooshing into itself like a mattress, instead of taking the stamp properly.
Yeah I thought that might be the problem while I was doing it, I'll do a few tests on single sheets to try and nail down the problem
So when I have done tooling. The first thing is do it before you attach it to your belt in this instance. Second I've noticed with larger stamps, because I actually have the set your using in the background, with the larger stamps its best to wet both sides of the leather. Especially with the high detailed stamps like the Celtic knot. And when stamping i use a dead blow hammer so it doesn't bounce as well as a granite slab positioned above the table leg. I want the least amount of flex when I strike true. I'll send you pictures if I figure out where to send it.
Contact cement responds well to aggression. So once you've put your dried pieces together, rather than using a roller to encourage bonding, take a rubber mallet, and smack the fuckers a few times.
Looks like your edge beveler could use some sharpening.
Just use some jeweler's rouge on some scrap leather, and that should do the trick.
great job!
Wonderful! Your work looks great again.
Thank you Mark!
It really looks great
Well done Kramer... so many think these things are difficult, but really are not. Chapes are essential to recreating the medieval belts. Happy Easter, Be well and Go well friend.
A dark paint wash might be a good choice for adding an aged patina.
Kind of wish UA-cam had a you followed this person from button. Because i remember when I subscribed and it was a VERY small community and it was just a few of us exchanging comments. And you know, much as I wish you all the best and congrats on the growth, i kind of miss those days. It was more personal.
It is harder to keep up with everyone as the channel continues to grow, but I still try to read all the comments. I remember when I first hit 300 subs and made a video about it 😊
Super cool. I'd never thought of doing a chape in leather. Turned out really nice! In the picture and in full body shots it definitely looks like metal. Great idea for people that don't have the tools to do metal work. Thanks for sharing!
I'm going to do it but keep the color of the leather, I like it better that way
Second?
Yup
@@WARobertsonMMII 😄
It would be great for doing multiple characters if the chape was removable. Like you could add the chape for higher status characters, then take it off to return to peasant level 😂
Just made one for my sword belt! It makes everything look just right. I made mine out of brass, though. Gonna make one for my gear belt next. You are good inspiration!
A heads up from a professional leatherworker...cut then SAND your edges before you use any edge guided line marking tools.
You are relying on the edges to to make your lines or borders.
One thing sorely lacking in basic leatherwork how to's is sanding your edges.
Use 600grit then 800 then 1000.
At least use an emery board. 👍
Definitely thought it was a piece of metal until I got a closer look! Very good indeed. I’d never know walking past you at a festival or LARP
for the antiqueing process on top of the paint, a good technique is using a wash, mixing ink or paint and water (sometimes a little soap too). the water will let the pigment flow into the valleys of the grooves and tooling naturally and avoid the peaks, nice and easy and still can DIY (yeah learned from painting DnD minis)! Great Video!
Combine past future traditional modernity real world with anachronism modern peaceful settings solarpunk immortal utopian society and futuristic technology
Past Future traditional modernity real world has anachronism modern peaceful settings solarpunk immortal utopian society eco friendly green world coexistence alternate universes multiverse and futuristic technology
Punished Props is another excellent youtube source for tips on making metal - looking props using "advanced" techniques like drybrushing . Most of what they do is in foam but it should translate nicely to leather if you use a surface sealer like Mod Podge.
very nice video, For a different approach try cutting the top and bottom off a soda can and use the aluminum sheet folded over to make a chape. it is thin but otherwise everything else works the same, including the tooling.
I believe if you water down your acrylic paint it becomes a wash. Which in painting world works the same way as the antique gell does on the leather.
Awesome, ive made some out of brass...
That's the next eventual step for me
I really wish this would come back into fashion...just like capes.
looks great. If you want to take it to the next level, hit it with some graphite powder and it'll shine more like metal.
Really beautiful!
Did you use any varnish to protect the paint at the end??
I've been working on a brass chape and it hasn't been nearly as easy
Oof, brass casting is at a whole different level!
Just a comment for the algorithm
For a better “metal” look get rub and buff
it looks amazing!
great job
You should do how to make a belt next
I don't know why I never considered a leather chape. I'm sure the wealthy preferred metal, but it makes a lot of sense that the not-so-wealthy would try to get the same effect for less money.
Oh, now that's nice.
I'm always amazed at how your videos are about subjects that I'm not particularly interested in, but then I watch the videos, and I'm completely fascinated! That looks like a fun and doable project. I thought it was metal when I saw it at the beginning. It must feel very satisfying to create products by yourself and to use them too! Resourcefulness and creativity are values we no longer need to survive. It's great that you are exploring these things and inspiring others.
I'd also like to congratulate you on your community of people who write comments because everybody is polite and encouraging and many people have helpful tips. It's always a pleasure hanging out on your channel because there aren't any knaves, varlets or charlatans here.
Although I suspect I'm in the running for next top village idiot! I'm rather ambitious though, so I may apply for a part-time Court Jester position.
Happy adventuring! And Happy Easter! 🙏🗿🐰🐥💐
Another fun and informative video! Do you have more leather projects you plan on doing anytime soon?
By the way, where did you get your leather tools?
Don't have any planned specifically, but there will definitely be more. My tools are from an assortment of places, Weaver Leather Craft Supply which I love (great UA-cam channel too!), Tandy, and recently some needles and stamps from Hobby Lobby.
@@LivingAnachronism Nice! I look forward to them! Yeah I actually made a Dirk scabbard by following the steps in one of his videos, great content there! Thanks for the info! 😄
Drybrush.
First?
Thank you.
From up close it looked very not metal. I cant shake it off. Try aluminium soda can instead?
I’m a doomsday prepper and I’m obsessed with the post apocalypse stuff.
I hand braided a belt using paracords. If I ever need ropes to make traps or go fishing, I can use some of the paracord from my belt. I also have a roll of fishing lines to make traps.