Nice demonstration. Actually working with an exact same unit these day with goal of RC steering for a full-size quad. I’m probably gonna discard the control unit and just buy a new dc motor driver and hack the angular sensor. Can update on my channel when I have something to show (within the next month or so).
Should be easy enough to build a power assisted robo-suit with a couple of these. I'd like to see you build an "arm" or "leg" mockup just to see if you can use it to lift something really heavy, or possibly arm wrestle with a world champion arm wrestler? Do something fun with this! :)
Nice.job. cam you tell me the exact model of the power steering are you using? I'm trying to find the model with right side electric motor like yours but with no succes. It is from a right steering car?
Thanks for the video. Do you remember the name of the aftermarket module that communicates with the ECU. I need to get one for my build and I'm using an NSK j500 ECU that goes with a vw fitted electric power steering unit. 3 wires for communication.
I’ve just fitted a Corsa C unit to my 1950 F1 pickup truck and used the controller from the guy in Portugal. I wired it as per his instructions but it doesn’t work. I’ve fed current directly to the motor and this works, is there a way I can check the ECU to determine if this is faulty or if it’s the control. Thanks Tony
Hello good day, can I put this corsa controller in a steering wheel of a Chevrolet beat? Or can you tell me which controller I can adapt, thank you very much
Bro i have a kia it's EPS when I turn little bit for the right side only at a certain angle the steering make unusual sound like something is grinding inside and when i complete turning it the sound disappears, What is the problem ??
2013 Hyundai Santa Fe Sport. Very cold this morning -20C and the EPS warning light on when car started (easily). Warmed up the interior and some heat to the engine compartment. Ignition off and then back on, EPS warning light cleared, steering normal. Solid state electronics better than liquid steering pump???
No reason why electronics don't work at low temp (high temp can be a problem). More likely battery voltage was a bit low after cold starting and system disabled itself until voltage came back up once alternator had run for a minute or 2
@@msinclair810 Maybe. This morning -15'C in garage, block heater and battery warmer not used today but car starts promptly. EPS light went out quickly and steering loose ready to go! Mysterious. So maybe switch off after a long warm up and then restart should clear it.
Does this mean that you have to set the power steering when going fast or slow? Do you know of a way that we can find a automatic way of doing the setting. My project is I am fitting a B1800 Honda power plant into a 1990 mini using the Honda wiring loom and Vauxhall Corse strewing unit, if thathelps
Youngster247 - You should try a very simple Arduino-based varible-effort controller. If you know what I am talking about, you can figure it out quickly. If not, I'm sure you can find someone who knows. Nice thing about Arduino is you can set various ranges for different types of driving, just like the modern killer cars. Good luck!
Im working on rc steering for a quad with this exact power steering module. I would say intially say yes, because the dc motor which gives the «power» is just standard 12v with two cables. So a 60a motor driver will do it. I’m working into wether I can use (hack) the original torque and angular sensor as well, so I don’t need to add my own. Will probably work, ask me in a months time.
Hello, how are you, what is the name of that adapter and the enhancer? What model is it and how much is it and where can I buy it? I want to buy them but I don't know how to find it, if someone can help me, thank you very much.
Would you know the common cause of failure on these columns? I have power in but no power out since AA guy boost started my car. Obviously he says it must have been damaged before. (it was fine). Just thinking that a very high charge could have damaged the ecu. Nothing else is damaged.
@@msinclair810 I dropped the column assy out as its the easiest way to check the power and earth leads (which were fine). On inspection of the pcb it looks visually OK with no sign of burning etc and doesn't smell of burning either. But I agree with you that power in but none out is the Control unit. These are coded to the car I believe and secondhand units can't be recoded only "virginised" by using specific equipment. Looks like it's "down the reman route" then. 👍🤑🤑🤑
Hello Martin, which model Vauxhalls would I find this system on and who is manufacturer of electronics for "fooling" the system. Thanks, Martin. Regards, Paul.
I want to test power steering on the table but I m unable to generate tacho signal and engine speed break speed generator to test power steering on the table.where I get this device shown in video help pls
Simplified explanation about eps wiring. Would you please give me what kind of adaptor you put in three wire? (Ignition, vehicle and motor speed sensors? Thanks jun from philippines
Hello, great video by the way... I just want ask a quick question. The red cable you’ve got connected to the battery with the clips. Where would you connect that red ignition cable when you’ve installed the whole power steering unit in car? Thanks, Mike
The thin low current red wire goes to an ignition on positive, the thick red goes to a high current battery positive supply (such as starter solenoid) via a 30 or 40 Amp fuse.
I would to add electronic power steering to my 2006 acura. So how do I get one little boxes ? in the U.S. Or does anyone know the pins on the ecu I need to use ?
Hello, my friend, I'm from Brazil and I'm trying to install this column. You have the module's electrical connection, I'd be grateful if you could help me. I want to install on ford escort hugs
@@simonmbulelo7502 Olá amigo o módulo é Mitsubishi mas a coluna é encontrada em carros da Nissan , mais barato e fácil de encontrar aqui no Brasil, se precisa tenho o diagrama elétrico do módulo
Good morning friend, I'm Brazilian, I'm adapting an electric steering kit in my car, my friend I need help, I saw that you use a potentiometer to regulate the direction, would you like to give me the electrical diagram God bless your life
Martin, which column and module are you using? I’m trying to find a module like your where I can put a speed sensor but all I can find is the ones that use can-bus network and stay stuck in that failsafe mode..
Who although play 18 holes of golf pretty well, could and would likely not be able to diagnose any significant automotive problem to save their own lives ...
Hello . Can anyone tell me where can i buy that "bypass" " adapter that tricks the ecu ". Preference a place like AliExpress or where i can ship to Portugal . Thks
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Nice demonstration. Actually working with an exact same unit these day with goal of RC steering for a full-size quad. I’m probably gonna discard the control unit and just buy a new dc motor driver and hack the angular sensor.
Can update on my channel when I have something to show (within the next month or so).
Whats the name of the adaptor?
Should be easy enough to build a power assisted robo-suit with a couple of these. I'd like to see you build an "arm" or "leg" mockup just to see if you can use it to lift something really heavy, or possibly arm wrestle with a world champion arm wrestler? Do something fun with this! :)
Tuvoca - Maybe build robotic arm wrestlers that battle each other to the point one flips over or off it's chair? I like it!
What are the components and values used for the sensors to make the ecm work in a manual steering vehicle?
Good demo! Thanks for sharing.
Can you make a video on how you wired the potentio meter to the speed sensor? Thanks
Hi did you get answer to your question? I want to know also how to connect speed controller
@@rhexdelacruz3313 me too
Me to I want to know what chip can use it And potentiometer and wiring connection pls.
Hi, how do you take of the spline from the top part?
Nice.job. cam you tell me the exact model of the power steering are you using?
I'm trying to find the model with right side electric motor like yours but with no succes. It is from a right steering car?
Vauxhall Corsa C 2000-2006 or Opel equivalent
Thanks for the video. Do you remember the name of the aftermarket module that communicates with the ECU. I need to get one for my build and I'm using an NSK j500 ECU that goes with a vw fitted electric power steering unit. 3 wires for communication.
Where do you get the module for Speed Emulation in Europe? Thank
Can it be install on 1990 model Hyundai Porter,? It's a complete mechanical or manual type sir
So long as there is space for the motor under the dash, it should be possible.
Hi trying to find one of the can modules where could I find one thanks
Plenty on ebay, eg: www.ebay.co.uk/itm/284408335748?hash=item42380ecd84:g:DEUAAOSwNYlhWe4a
Please send the link of the adaptor you are using.
www.ebay.co.uk/itm/284402148325?hash=item4237b063e5:g:bcIAAOSwK3thWfSh
@@msinclair810 Thankyou so much. one more thing please- Will it work with every control unit? I have Kia Storage power steering assembly.
knowing is one thing Understanding is another. good work
Thank you very much
I’ve just fitted a Corsa C unit to my 1950 F1 pickup truck and used the controller from the guy in Portugal. I wired it as per his instructions but it doesn’t work. I’ve fed current directly to the motor and this works, is there a way I can check the ECU to determine if this is faulty or if it’s the control. Thanks Tony
Hi, I’m waiting also for my package from Portugal. Anyway I can reach you? Would love to hear your experience as I’m planning to this also.
Hello good day, can I put this corsa controller in a steering wheel of a Chevrolet beat? Or can you tell me which controller I can adapt, thank you very much
Good morning sir.. asking that module can be used in EPS with can bus? Like nissan kicks EPS thank you
Sorry don't know, I've only fitted them to classic cars with no CANBUS.
My car eps same g4 eps system problem is some time on some time pwr steering hard what problem
Bro i have a kia it's EPS when I turn little bit for the right side only at a certain angle the steering make unusual sound like something is grinding inside and when i complete turning it the sound disappears,
What is the problem ??
Sorry, no idea; need to strip it down and check.
Wow , that really neat use of eps ,can you provide me link for that module which tricks eps.
Hello, did you find out the module that trips the eps?
Hello can you help me with the name of eps 🙏 please
2013 Hyundai Santa Fe Sport. Very cold this morning -20C and the EPS warning light on when car started (easily). Warmed up the interior and some heat to the engine compartment. Ignition off and then back on, EPS warning light cleared, steering normal. Solid state electronics better than liquid steering pump???
No reason why electronics don't work at low temp (high temp can be a problem). More likely battery voltage was a bit low after cold starting and system disabled itself until voltage came back up once alternator had run for a minute or 2
@@msinclair810 Maybe. This morning -15'C in garage, block heater and battery warmer not used today but car starts promptly. EPS light went out quickly and steering loose ready to go! Mysterious. So maybe switch off after a long warm up and then restart should clear it.
Great job. Now i understan how can modify my car
Hi sir what chip can use it to eps module speed wiring connection
Hope it's better than the meriva stock unit.
Does this mean that you have to set the power steering when going fast or slow? Do you know of a way that we can find a automatic way of doing the setting.
My project is I am fitting a B1800 Honda power plant into a 1990 mini using the Honda wiring loom and Vauxhall Corse strewing unit, if thathelps
You can manually adjust it for personal preference or alternatively use an abs type sensor to give it a speed input so it adjusts with speed.
could you please provide some information on the adapter that tricks the ECU. i have looked everywhere but cant find them. thanks
simonebirchall.co.uk/controllers/variable.html
Martin Sinclair ca i buy 1?
Youngster247 - You should try a very simple Arduino-based varible-effort controller. If you know what I am talking about, you can figure it out quickly. If not, I'm sure you can find someone who knows. Nice thing about Arduino is you can set various ranges for different types of driving, just like the modern killer cars. Good luck!
I have a problem with installing the same device Could you help me
sir what is the name of the adapter you can use to the eps module and where i can buy thank you
Hi I have that same setup yet I’m trying to figure out how to have an djustble
www.ebay.co.uk/itm/322372412305?hash=item4b0ee4a391:g:O60AAOSwxp9W6nQs
Wiring installation diagram pls.. Same with my eps module..
Thanks for video...
Where can i get that white thing u put on it..
Whats the name of that thing...
www.ebay.co.uk/itm/Corsa-B-C-Kit-Electric-power-steering-controller-box-With-ECU-plug-EPAS/142463717230?hash=item212b7fcf6e:g:i2MAAOSwxGRZgYFb
Can anyone tell me where I can purchase this unit?
Do you used potenciometer? What is value? Like is ligation? Sorry my english!
Hello dear, what is this power adapter that you used in order to trip the ecu? thank you!
Could you please help me with the name of the adapter please
www.ebay.co.uk/itm/284402148325?hash=item4237b063e5:g:bcIAAOSwK3thWfSh
@@msinclair810 thank you so much
Would it be possible to control the DC motor which actuates the shaft electronically? (Without the assistance of the hand or the human interaction)
Im working on rc steering for a quad with this exact power steering module. I would say intially say yes, because the dc motor which gives the «power» is just standard 12v with two cables. So a 60a motor driver will do it. I’m working into wether I can use (hack) the original torque and angular sensor as well, so I don’t need to add my own. Will probably work, ask me in a months time.
Hello, how are you, what is the name of that adapter and the enhancer? What model is it and how much is it and where can I buy it? I want to buy them but I don't know how to find it, if someone can help me, thank you very much.
www.ebay.co.uk/itm/251838446769?hash=item3aa2bdbcb1:g:HGYAAOSwPzpZda1d
Hi can you provide link for adapter to trick ecu I mean we're to buy am in southafrica
www.ebay.co.uk/itm/322372412305?hash=item4b0ee4a391:g:O60AAOSwxp9W6nQs
Co to za moduł
Would you know the common cause of failure on these columns? I have power in but no power out since AA guy boost started my car. Obviously he says it must have been damaged before. (it was fine). Just thinking that a very high charge could have damaged the ecu. Nothing else is damaged.
The fast chargers that some emergency services use are damaging to modern cars with ecu's. I suggest changing the control box on the column.
@@msinclair810
I dropped the column assy out as its the easiest way to check the power and earth leads (which were fine). On inspection of the pcb it looks visually OK with no sign of burning etc and doesn't smell of burning either. But I agree with you that power in but none out is the Control unit.
These are coded to the car I believe and secondhand units can't be recoded only "virginised" by using specific equipment.
Looks like it's "down the reman route" then.
👍🤑🤑🤑
@@harwoods11 If its a Corsa C unit, it has no can bus and isn't coded.
@@msinclair810
Unfortunately it's a 2007 clio. 😒
I have a mk2 3.8 jag , have you or someone you know installed the unit into the jag?
Hello Martin, which model Vauxhalls would I find this system on and who is manufacturer of electronics for "fooling" the system. Thanks, Martin. Regards, Paul.
fits what cars?
Could the eps be fitted to a mk4 astra effectively replacing the hydro electric setup?
Yes, you'd need the manual rack as well as the column
i have a 2004 crown athlete, THE STEERING WHEEL IS UNLOCK BUT STILL DOESNT WANNA TURN, WHAT COULD B THE PROBLEM?
I want to test power steering on the table but I m unable to generate tacho signal and engine speed break speed generator to test power steering on the table.where I get this device shown in video help pls
Hola que tal como se hace la conexión electrica
Simplified explanation about eps wiring. Would you please give me what kind of adaptor you put in three wire? (Ignition, vehicle and motor speed sensors? Thanks jun from philippines
Plenty of controllers on ebay: www.ebay.co.uk/itm/142463712424?hash=item212b7fbca8:g:GD4AAOSw9TRfvrFP
Thank you sir Martin. Your information is a big help for me. Now I know where to buy ecu controllers.
Hi sir.. Can I buy full setup as your?
Hello, great video by the way... I just want ask a quick question. The red cable you’ve got connected to the battery with the clips. Where would you connect that red ignition cable when you’ve installed the whole power steering unit in car? Thanks, Mike
The thin low current red wire goes to an ignition on positive, the thick red goes to a high current battery positive supply (such as starter solenoid) via a 30 or 40 Amp fuse.
Thank you
I would to add electronic power steering to my 2006 acura. So how do I get one little boxes ? in the U.S. Or does anyone know the pins on the ecu I need to use ?
Sir where I got this device engine speed break speed generator to test power steering
I want to test power steering on the table but I m unable to generate tacho signal and engine speed,break speed like this video pls help
I want the scheme too, please
I have aftar market electric power steering pales adapter plz link provided sir
www.ebay.co.uk/itm/Corsa-B-C-Kit-Electric-power-steering-controller-box-With-ECU-plug-EPAS/142463717230?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
Kunal Daterao - The guy who sells them is in Portugal. You can get it on eBay
Hello, my friend, I'm
from Brazil and I'm trying to install this column. You have the module's
electrical connection, I'd be grateful if you could help me.
I want to install on ford escort hugs
can anyone tell me how to fix opel corsa c electric power steering
@Darc Diego cara tu conseguiu achar essa coluna mitsubishi que ele usou?
@@simonmbulelo7502 Olá amigo o módulo é Mitsubishi mas a coluna é encontrada em carros da Nissan , mais barato e fácil de encontrar aqui no Brasil, se precisa tenho o diagrama elétrico do módulo
Good morning friend, I'm Brazilian, I'm adapting an electric steering kit in my car, my friend I need help, I saw that you use a potentiometer to regulate the direction, would you like to give me the electrical diagram
God bless your life
www.ebay.co.uk/itm/284402148325?hash=item4237b063e5:g:bcIAAOSwK3thWfSh
Where did you get the part to trick the ECU for vehicle speed sensor
www.ebay.co.uk/itm/Corsa-B-C-Kit-Electric-power-steering-controller-box-With-ECU-plug-EPAS/142463717230
@@msinclair810 can this trick ecu device use in another model power steering unit other than corsa?
Thanx a lot
the name of that adptor
www.ebay.co.uk/itm/Corsa-B-C-Kit-Electric-power-steering-controller-box-With-ECU-plug-EPAS/142463712424?hash=item212b7fbca8:g:GD4AAOSw9TRfvrFP
Martin, which column and module are you using? I’m trying to find a module like your where I can put a speed sensor but all I can find is the ones that use can-bus network and stay stuck in that failsafe mode..
Corsa C
Electronic power steering systems
ESP PARTS
DC motor
Torque sensor
Vehicle speed sensor
RPM SENSOR
ECU
WITH IMPUTS AND OUTPUTS
vise-grip
Plz send me....wiring digram
I would have to say that you my friend probably have a positive 20 IQ points minimum on any car manufacturer executive...
20 points higher of course
Who although play 18 holes of golf pretty well, could and would likely not be able to diagnose any significant automotive problem to save their own lives ...
Hello .
Can anyone tell me where can i buy that "bypass" " adapter that tricks the ecu ".
Preference a place like AliExpress or where i can ship to Portugal .
Thks