Plumbutter v1's have separate 1/4" audio input & output which is super useful for self patching. You could do this with plumbutter 2 by splitter cable, one output from splitter cable goes to mixer, the other goes back to an input. Basically you can process one side of Plumbutter with the other side.
Was looking forward to the input video. This opens the whole system even more. I enjoyed the mix at 12:10 a lot - I wonder how a slow drone through the aux would work together with everything else. Regarding the problem with the one AVDog: Maybe you could write Peter Blasser about it. Patch Point would be another option as they also build/sell the instruments.
Hello Radok, yes I think the mix at that point was the most satisfying of them all. Happy you liked it! Tuning is a nightmare with all the oscillators. So adding another drone through the AUX will be even more difficult to tune. I first want to spent some time with the instrument and then contact Patch Point or Peter with particular questions. Because I'm not sure yet if I'm using it properly. Also I know that every Plumbutter is slightly different, so getting to know the quirks of the one I have is important.
nice, considering plumbutter in the future this is really helpful (or making me less hesitant haha) - also the deerhorn should process the audio from your phone at both 'bellows' (i have a deerhorn) - as long as the input is stereo i imagine and depending on how youve tuned the attenuators - might have an influence
You should deffo get audio into both sides of deerhorn, maybe your signal was mono. Send it stereo & you'll get sound fading in as you move hand towards & & then again as you move hand away, adjust the response of the deerhorn till it works well.
Probably my favourite Plumbutter track from my favourite Plumbutter musician is this from Kozepz, definitely worth checking out for inspiration kozepz.bandcamp.com/track/hofrvi
Belle démo
The well tuned piano.
Hi Thanos - again thank you so much for doing these - they're very helpful.
Thnx for the positive words! It keeps me going!
Plumbutter v1's have separate 1/4" audio input & output which is super useful for self patching. You could do this with plumbutter 2 by splitter cable, one output from splitter cable goes to mixer, the other goes back to an input. Basically you can process one side of Plumbutter with the other side.
Wow, that's a great idea! I'll give it a try.
Was looking forward to the input video. This opens the whole system even more. I enjoyed the mix at 12:10 a lot - I wonder how a slow drone through the aux would work together with everything else. Regarding the problem with the one AVDog: Maybe you could write Peter Blasser about it. Patch Point would be another option as they also build/sell the instruments.
Hello Radok, yes I think the mix at that point was the most satisfying of them all. Happy you liked it! Tuning is a nightmare with all the oscillators. So adding another drone through the AUX will be even more difficult to tune. I first want to spent some time with the instrument and then contact Patch Point or Peter with particular questions. Because I'm not sure yet if I'm using it properly. Also I know that every Plumbutter is slightly different, so getting to know the quirks of the one I have is important.
Thanos F on my pb2 the middle aux works only with the left avdog too
@@janhenckell4178 This issue is now resolved. You need a stereo cable to connect to the AUX input and then it will work with both AV Dogs.
Thanos F dang. you‘re right. and both gongs too 😀 one of the mysteries is solved. thank you very much 👍
nice, considering plumbutter in the future this is really helpful (or making me less hesitant haha) - also the deerhorn should process the audio from your phone at both 'bellows' (i have a deerhorn) - as long as the input is stereo i imagine and depending on how youve tuned the attenuators - might have an influence
aaah yes that's a good point! I might have used a mono cable which is stupid now that I think about it. Thnx for the tip Chris!
You should deffo get audio into both sides of deerhorn, maybe your signal was mono. Send it stereo & you'll get sound fading in as you move hand towards & & then again as you move hand away, adjust the response of the deerhorn till it works well.
Yes that was the problem David, thnx!
Probably my favourite Plumbutter track from my favourite Plumbutter musician is this from Kozepz, definitely worth checking out for inspiration kozepz.bandcamp.com/track/hofrvi
Interesting track indeed! Minimal and well produced.
love it! can't wait for your exfriend synth videos!
Happy to hear that Keith! ExFriend video's coming really soon!