Mastercam Toolpaths Managers || Mastercam for Beginners || Mastercam Basic Programming

Mastercam in this Video we show u about Toolpaths Manager in fully details
The following shortcut keys (hotkeys) are available when you are working in Toolpaths Manager.
E - Expands or collapses all operations
L - Toggles toolpath locking on selected operations
P - Toggles posting on selected operations
T - Toggles toolpath display for selected operations
Del key - Deletes selected operations
Up arrow - Moves Insert Arrow up
Down arrow - Moves Insert Arrow down
Left arrow - Positions Insert Arrow after selected operation/group
Right arrow - Scrolls Toolpaths Manager list to make Insert Arrow visible
Ctrl+C - Copies selected operation(s)
Ctrl+X - Cuts selected operation(s)
Ctrl+V - Pastes cut or copied operation(s)
Ctrl+A - Selects all operations
Ctrl+Z - Undeletes deleted operation(s)
:- Parameters
#Select all operations
Selects all operations listed in the Toolpaths Manager. Use to post, verify, regenerate, or perform other functions on all operations within a job.
#Select all dirty operations
Selects all dirty (invalid) operations in the Toolpaths Manager. Use to post, verify, regenerate, or perform other functions on selected operations within a job.
#Regenerate all selected operations
Recalculates selected operations after you have made changes.
#Regenerate all dirty operations
Recalculates all dirty (invalid) operations after you have made changes.
#Backplot selected operations
Simulates tool movement for selected operations.
#Verify selected operations
Simulates machining and material removal for selected operations.
#Simulator Options
Opens the Simulator Options dialog box.
#Post selected operations
For a non-Mill-Turn part, runs the post processor for selected operations and creates the NC program. If you are in a Mill-Turn machine group, this button runs Sync Manager. For more information, please see About Post Processing.
#High feed
Optimizes feed rates for selected operations. For more information, please Highfieldldd Machining.
#Delete all operations, groups, and tools
Deletes all machine groups in the Toolpaths Manager except for the last one in the list. This deletion includes operations, tools, and machine definitions.
CAUTION: You will not be able to undo this deletion.
#Help
Displays the Help for the Toolpaths Manager.
#Toggle locking on selected operations
Locks and unlocks selected operations. Locking the operation prevents you from regenerating the toolpath.
Note: If you regenerate the toolpath after unlocking it, you will lose any changes you have made.
#Toggle display on selected operations
Displays and hides selected operations in the graphics window. When a part contains a mixture of operations that are displayed or hidden, clicking Select all operations and then Toggle display on selected operations hides all toolpaths in the graphics window. Clicking Toggle display on selected operations again shows all toolpaths.
#Toggle posting on selected operations
Enables and disables posting on selected operations. Note that the ghost symbol indicates that posting is off for the operation.
#Move insert arrow down one item
Moves the insert arrow down past the next operation. The insert arrow controls where new operations will be inserted. Its default position is at the bottom of the list of operations.
#Move insert arrow up one item
Moves the insert arrow up past the previous operation. Its default position is at the bottom of the list of operations. The insert arrow controls where new operations will be inserted.
#Position insert arrow after a selected operation or after a selected group
Moves the insert arrow down past the selected operation or group. Its default position is at the bottom of the list of operations. The insert arrow controls where new operations will be inserted.
#Scroll window so insert arrow is visible
Scrolls the viewing area to display the point at which you can view the insert arrow.
#Only display selected toolpaths
When enabled, displays toolpaths in the graphics window only for the operations you select in the toolpaths Manager list. Can be used in combination with the Only display associative geometry.
#Only display associative geometry
When enabled, displays all geometry associated with the selected operations, provided that the geometry is not hidden or blanked, and is on levels that are visible. Can be used in combination with Only display selected toolpaths.
#Hide rapid retract moves
Hides and shows all rapid retract moves in the current file.
#Tool setup
Click to open the Tool Setup Manager dialog box. Use the dialog box to establish the physical orientation and positioning of tools used in the active machine group.
#Edit reference positions
Click to open the Machine Reference Position Manager dialog box. Use to edit the location of the reference positions.
Be connected we will upload on Mastercam in Hindi

[@technicalgyanbox4681]

Thanks sir

[@VirenderSinghBhati]

thank you for your kind support

[@erarvindkverma2011]

Sir
I download mastercam x20 online if i generate program it show message therequest function can not be run from mastercam Lathe
Please tell me how to solve the problem

[@VirenderSinghBhati]

Thank you dear for supporting ❣️ us

[@VirenderSinghBhati]

Call me for your Solution [phone]

[@erarvindkverma2011]

Thanks

[@VirenderSinghBhati]

Welcome Ji

[@JitendraYadav-cu6nm]

Sir mera wire frame chaning slection window open नही हो रहा है

[@VirenderSinghBhati]

contact us at 9983660675 for more information

[@joginderkumar1013]

Master cam phree me download ho skta hai kya apka phone number mil skta hai kya

[@VirenderSinghBhati]

Thank u dear for supporting ❣️ us

[@VirenderSinghBhati]

Contact us 9983660675